Quantcast

500 Series Cable Connectors, 2 Screw, Bare, Suits up to 3 x 10mm² Cables

500 Series Cable Connectors, 2 Screw, Bare, Suits up to 3 x 10mm² Cables

500 Series Cable Connectors, 2 Screw, Bare, Suits up to 3 x 10mm² Cables

Item Number: 562K

Retail
$6.56
RRP (Inc. GST)

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Product brand

Clipsal

Physical

Provided equipment

2 x screw

Connector type

screw terminals

EU RoHS Directive

Compliant

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

Product out of China RoHS scope. Substance declaration for your information

Others

Cable cross section

10-10 mm² fine stranded without cable end sleeve

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Weight

13 g

Package 1 Height

15 mm

Package 1 width

10 mm

Package 1 Length

20 mm
Show all specifications

Frequently Asked Questions

hide show

What is the replacement to the PDL620K dimmer?

We do not have a direct replacement for that dimmer option.

What are the specifications for the 56K ohm resistor used with the 140DSI35300?

A 56K ohm, +/- 5%, 1/8W resistor would be sufficient for use with the 140DSI35300.


How is the data retained on the XBTGT2930?

Issue:
Looking for an explaination or description of where and how the system settings are retained on a Magelis XBTGT2930.

Product Range:
Magelis XBTGT2930 series

Resolution:
The Magelis XBTGT2930 series contains a lithium-ion battery used for 512K SRAM backup. This will save all system settings such as clock, date, IP address. It is also used for application storgage for Alarms, Data Logging, Event logging, and Retentive Variables.

What is the replacement for the Magelis XBTGT4230 HMI?

Issue
Replacement for Magelis XBTGT4230

Product Line
Magelis XBTGT

Cause
Obsolete

Resolution
The Magelis XBTGT4230 HMI can be replaced by either the HMIGTO4310 or (HMIDT351 + HMIG3U). Here are details for the substitution replacements:

Substitution of XBTGT4230 to HMIGTO4310:
---VijeoDesigner applications  are 100 % compatible.
---The cut-out is identical
---The communication ports are identical except on COM1 , no RS422-RS485 signal only RS232C. For RS422-RS485 link , use a cables with converter like TSXPCX1030 for Schneider Twido/Premium PLC or HMIZ951 for Mitsubishi FX PLC
---Same  certifications.
---No extension Bus for Fieldbus modules ( Profibus , DeviceNet , CANopen )
---No support of SoMachine PLC functions
---No auxiliary interface for speaker or alarm output
---Better Screen color TFT LED 65K , More Flash Memory , addition mini-USB Device port and use of SD card  slot.

OR

Substitution of XBTGT4230 to HMIDT351 + HMIG3U
---VijeoDesigner applications  are 100 % compatible.
---The cut-out is different , use of  HMIZGCO1 mechanical adaptor
---The serial communication ports are identical  but COM1 Subd9 RS422/R232C becomes the COM2 and the COM2 RJ45 RS485 becomes the COM1
---Ethernet port with higher speed and with a second port
---Same  certifications.
---Possible Extension Bus for Fieldbus modules ( Profibus , DeviceNet , CANopen )
---No support of SoMachine PLC functions
---Same auxiliary interface for speaker or alarm output
---Better Screen color TFT LED 262K and more resolution WVGA , More Flash Memory , addition mini-USB Device + Host USB ports and use of SD card  slot.
 

What voltage is the key tag 6200KT and does it come with a Card?

It is 24V DC

Enquire at Assa Abloy 1300 562 587.

Unfortunately we do not sell the cards.

Updating Firmware on Obsolete 16 bit SCADAPacks (including SCADAPack Plus, SCADAPack Light and Micro 16 controllers)

This Technical Note describes the hardware requirements for updating firmware on obsolete SCADAPack models that include the 5203 & 5204 CPU boards (SCADAPacks from 2004 and earlier). The 5203 contains 2 RS-232 communication ports and the 5204 contains 1 RS-485 port and 1 RS-232 communication port. Both hardware boards where manufactured as part of SCADAPack, SCADAPack Light, SCADPack Plus and Micro 16 models.
 

Board Layout

Older versions of the 5203/5204 board has a place for 4 40-pin integrated circuits. These are labelled as U13, U14, U15 and U10 from left to right. There are also 2 jumper pins J3 and J4. These components determine the flash and RAM that is currently installed on the SCADAPack. In order to update the firmware on a 5203/5204 board to the latest released version, the SCADAPack must have 1024 bytes of RAM (OS & APP) installed.


 

Determining Installed RAM

U15 & U10 along with the jumper pins J3 and J4 determine how much RAM is installed. These chips can range from 128K - 512k each. Refer to to the table below to determine how much RAM is installed.
 
Total RAM OS RAM (U10) Jumper J4 APP RAM (U15) Jumper J3
256k 128k Right 128k Right
640k 128k Right 512k Left
1024k 512k Left 512k Left
512k 512k Left 0 Left
640k 512k Left 128k Right

If jumpers J3 and J4 are currently in the "Right" position, then you will need to update one or both of the RAM chips in U15 and U10. Contact your Schneider Electric Telemetrey & Remote SCADA Solutions Sales representative for part numbers and pricing or email SalesTRSS@Schneider-Electric.com
 

Firmware vs. Installed RAM

If the RAM installed is less than 1024K (i.e. anything but 1024k), then firmware version 1.65 is the highest that can run on the controller. Please contact Technical Support at trss-support@schneider-electric.com to obtain firmware version 1.65.

If you are updating a SCADAPack with the latest version of Realflo, IEC-61131 programming environment or simply updating the firmware, then ensure you have both U15 and U10 chips installed and they are both 512K


 
Show More