connector cable earth

500 Series Cable Connectors, 2 Screw, Hexagonal, Suits up to 3 x 6mm² Cables

Catalogue Number: 562A
connector cable earth
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Product brand
Clipsal
Provided equipment
2 x screw
Cable cross section
6-6 mm² fine stranded without cable end sleeve
Connector type
screw terminals
EU RoHS Directive
Compliant
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
Product out of China RoHS scope. Substance declaration for your information

Frequently Asked Questions

hide show

What are the 2 colour code standards supported on SENZ Data jacks

It is 568A and 568B

What is the suspension hook for the PDL 56 Series

You can use PDL56SHL - Suspension Hook (large) this is to fit the 56P and 56PA plugs and/or 56CR socket connectors.  

What is the conduit nut adaptor to suit the PDL 56 Series

Part number is PDL56AM40, for flexible conduit or hose.  Suits both 56P and 56PA and 56CR socket connectors.

What is the part number for a 52A Oven mech in the 600 series?

There is no 52A option in the 600 series. the highest rating available in that range is the PDL647WH which is 45A

What is the cut-out for the 56FA flush mount surround?

Solid and Cavity Brick Walls (Bracket Mounting)

Prepare wall by cutting hole 90 x 90mm for 56FA1, 90 x 190mm
for 56FA2, 90 x 285mm for 56FA3 and 190mm2 for 56FA4.
Mount bracket to exterior wall using any suitable fixing device i.e.
thrubolts, fibre plugs, etc.
Remove adhesive backing sheet from gasket and adhere to inner
surface of flange. Mount modules to bracket through flange.
Note: 1. For soft or porous brickwork we suggest adhesive
anchored fixing.
2. When mounting to brick ensure all mortar joints are
sealed with suitable caulking compound.

 

Panel Type Walls (Bracket Mounting)

Prepare wall by cutting hole as described above for solid and
cavity brick walls. Mount bracket to wall using suitable hollow wall
anchors. Adhere gasket to flange and mount modules through
flange to bracket.
Note: If possible mount bracket to building frame i.e. wooden
noggins and studs with suitable wood screws.

Are APC Cat 6 Patch Panels color coded for 568B or 568A?

Issue: 
The installer needs to know the color code on the rear of the Cat 6 patch panel.  
 
Product Line:
Cables and Connectivity Solutions, Patch Panels
 
Environment:
CAT6PNL-24, CAT6PNL-48
 
Cause:
Installers need to know if the patch panel has the color code they require.
 
Resolution : 
 
The CAT6PNL-xx series of Patch Panels have both 568B and 568A color codes. 

What is the part number for a patch panel, 24 port, CAT 6, loaded?

The part number is RJ6/24PP.
 Some of the key features are:
  •  Universal colour coding for 568A and 568B standards
  • Removable rear cable management tray
  • Individual removable modular jacks
  • ACMA compliant
  • Dielectric Strength: 1,000 V RmS at 60hz for 1 minute
  • Current Rating: 1.5 A
  • Insulation Resistance: 10 mohm
  • Temperature Range: -10 to 60 deg C
  • Material: Phosphor bronze
  • Standard: AS/NZS 3080:2003, ISO/IEC 11801 2002 and ANSI/TIA/EIA-568-B 

 
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=RJ6/24PP 

How are the Color Codes 568A and 568B different?

Issue:
The difference between T568A and T568B color codes is needed.

Product Line:
Cables and Connectivity Solutions, Patch Panels

Environment:
CAT6PNL-24 and CAT6PNL-48, all serial ranges. 

Cause:
Not following the correct color code can cause wiring errors.

Answer: 
568A and 568B are color code standards that show which color wire matches up with a specific position on an RJ45 connector. When designing a network infrastructure only one color code can be followed. All commercial and residential wiring in the US follows TIA 568B color code. 

T568B Color Code
RJ45 Pin---Pair Color
1-------------White/Orange
2-------------Orange
3-------------White/Green
4-------------Blue
5-------------White/Blue
6-------------Green
7-------------White/Brown
8-------------Brown

T568A Color Code
RJ45 Pin---Pair Color
1-------------White/Green
2-------------Green
3-------------White/Orange
4-------------Blue
5-------------White/Blue
6-------------Orange
7-------------White/Brown
8-------------Brown

How do you read the color code on the IDC connectors of the Cat 6 Patch Panels?

Issue:
Customers may question which color code instructions to follow, 568B vs. 568A. Or they may not understand how to read the color code.

Product Line:
Cables and Connectivity Solutions, Cat 6 Patch Panels

Environment:
All versions and serial ranges.

Cause:
The color code instructions may be confusing.

Resolution:
For high speed networking 568B is used almost universally.
If you need help determining how to terminate to the 568B or 568A color code please see the attached file.
 

What is the part number of the flush surround to suit 56CV, one piece cover, switched outlets?

56FA2 is the part number of the flush surround to suit 56CV, one piece cover switched outlets. Surface mounted 56 Series Sockets, Switches and Combinations can be transformed into flush mounting equivalents using the 56FA Surrounds and Brackets. The surrounds can be used on various types of walls to ensure a neat installation, such as:
• a mounting enclosure (back box) in poured concrete
• a bracket on brick, brick veneer or panel walls.
The brackets provide the installer with a  practical method of flush mounting 56 Series accessories. Comprehensive installation instructions are supplied with all units.
56FA1, 56FA2, 56FA3 and 56FA4 Flush Surrounds contain a moulded flange, foam gasket and stainless steel mounting screws.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56FA2

What voltage is the key tag 6200KT and does it come with a Card?

It is 24V DC

Enquire at Assa Abloy 1300 562 587.

Unfortunately we do not sell the cards.

What are the secondary-injection test kits for Micrologic circuit breakers?


Product Line:
Legacy, Powerpact, and Masterpact circuit breakers

Resolution:
The secondary injection test kit for Legacy Micrologic (Micrologic Series B) breakers is the UTS3.
The Full Function Test Kit  (FFTK) for Powerpact M, P, R frame and Masterpact circuit breakers with electronic or Micrologic trip units is S33595.
The Hand Held Test Kit (HHTK) for Powerpact M, P, R frame and Masterpact circuit breakers with electronic or Micrologic trip units is S33594.
The UTA tester for testing Powerpact H, J, Lcircuit breakers is STRV00910.
The Pocket Tester for testing Powerpact H, J, Lcircuit breakers is S434206.
The Universal Test Kit for testing Legacy Micrologic (Micrologic Series B) trip units is UTS3.
The test kit for testing Masterpact and Compact circuit breakers with STR trip units is 55391.
 
Show More