RCA Speaker Socket Red RCA White Base Single Pole

Catalogue Number: 541M
RRP (Inc. GST)
Colour White (WH)
  • White 1 PCE


hide show
Range of product
  • VDI
  • PDL 600 Designer Series
    • Product brand
      without marking
      Connections - terminals
      solder terminal
      Package 1 Weight
      0.012 kg

      Frequently Asked Questions

      hide show

      Is 541A UV stabilised?

      Yes. 541A is UV stabilised. More details on 541A can be accessed via the below link

      How to connect open collector output to 5410 counter input expansion module for SCADAPack?

      Wiring of counter inputs on Expansion module 5410 is shown below

      What size cable does the 541a series take?

      2.5mm twin flat insulated and sheathed

      What are dimensions of 157/1?

      Dimensions for part number 157/1 is a 94mm x 54mm x 39mm.

      Can (2) MG26925 , 1a/1b aux contacts be used with a Multi 9 breaker

      Yes , there is provisions for stacking on the left side of the breaker up to 54mm (3`)
      of accessories

      CTA-ID : 2062625

      Does the 5410 counter module work if the Scadapack 300 series is on Sleep mode?

      NO, During the Scadapack 300 series RTU Sleep mode, the 5Vdc power to the I/O bus is switched off. Therefore, no I/O expansion module will be operating.The other option is used the the 3 counter inputs on the controller board because it will continue to function while its on sleep mode.

      What is the IP rating of 541A?

      There is no IP rating for 541A. It is Unofficially rated at IP20 but this is only valid with a globe. With no globes the pins are accessible so it would'nt even be to IP20.
      Some of the key features are:
      • voltege rating: 250V
      • Power rating: 250W
      • Festoon lampholders and accessories
      • 2 pin bayonet cap
      • Solid moulding with safety skirt
      • accommodates 2.5 sq mm twin flat cables
      • AS 3117-1994 Standard
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=541A


      Do we sell "miniature architrave switches"

      Yes we do. The product is from the standard series.
      1 Gang - 30T
      2 Gang - 32TA
      3 Gang - 33TA

      The measurements for these products are

      30T dimensions are 54mm (l) x 27mm (w) x 10mm (d).
      32TA dimensions are 75mm (l) x 27mm (w) x 10mm (d).
      33TA dimensions are 98mm (l) x 27mm (w) x 10mm (d).

      For further information, please visit

      User-added image


      What do I gain with a Unity Output Power Factor (kW=kVA)?

      What do I gain with a Unity Output Power Factor (kW=kVA)?
      Product line:
      Three Phase UPS Systems
      All models/ all serial numbers
      What do I gain with a Unity Output Power Factor (kW=kVA)? The advantage of unity power factor is that these UPS systems are 100% compatible with today's high power factor loads. Traditionally, a UPS with a lower power factor needs to be oversized to support today's power factor corrected loads.  Some APC 3-phase UPS products as well as newer single phase products(SRT6K) have an output rating of kW=kVA or Unity Power Factor. While the more traditional double conversion units have output ratings of kW=0.8kVA. 
      Refer to the following application note for a better understanding of power factor as related to APC products