Frequently Asked Questions
One the DLT unit press and hold down the button 5 (bottom) for approximately 10 seconds.
This will display a Clock icon with Select, +, - and OK options for the DLT buttons.
Press Select to toggle between hours and minutes.
Press the +and - button to set the hours or minutes as required.
Press OK to confirm and set the time on the DLT unit.
The white cover plate is 5085DF-PW
C-Bus Toolkit 1.12.7 and above. It is always recommended to be on the latest software available from https://www2.clipsal.com/cis/technical/downloads/c-bus_toolkit
Yes, open the GUI for the DLT switch, under the 'Global' Tab create a 'Group Address' under 'Disable All Keys' set this to Disables when On.
You can then assign that group address to another switch with an on/off function, this will then disable that DLT when the group is active.
You can also disable via a Schedule, if you have a C-Touch Screen or other device with Schedules the same can be acheived. this is common when the DLT is used in a public area like at PUB's or CLUB's.
If you require further help with configuration please call Technical Support on 1300 722 247
Press and hold down the bottom left button, whilst continuing to hold then double press the top right button.
Please note that access to the Tools Page can be disabled using C-Bus Toolkit software.