coupling half pvc c/extn end

Coupling Half PVC Cord Extension End

Catalogue Number: 437S
coupling half pvc c/extn end
Retail
$14.23
RRP (Inc. GST)
Colour Amber (AM)
  • Amber 1 PCE

Specifications

hide show
Product brand
Clipsal
Product or component type
coupling ring
Product destination
socket
Fixing center
64 x 40 mm
Material
PVC (polyvinyl chloride)
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
Product out of China RoHS scope. Substance declaration for your information

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • Technical Data Catalogues

  • Specifications

Frequently Asked Questions

hide show

What is difference between 437P & 437PR?

The part 437P is half coupling.
 
437PR 437P
  • Suits 437S socket coupling
  • Female threads 2 inch B.S.P (11 T.P.I.), suits 439 Series, 437R Coupling Ring, Single Phase 56SO310 Series sockets, 56C310 Series combinations and SS15 Series suspension switch sockets.

Can i use a 439S on TPS cable (White flat cable)?

No, Our plug tops are strictly designed for flexible cord only.

Is the thread for on a 437PS series the same as 56 series?

Yes they are the same thread, 2 inch BSP.

What is the UL file number for the Altivar ATV18?

Issue: What is the UL file number for the Altivar ATV18?
 
Product Line: ATV18
 
Environment: All
 
Cause: N/A
 
Resolution: The file number is E164874.


 

Can the Altivar ATV18 freewheel stop?

Issue: Can the Altivar ATV18 freewheel stop?
 
Product Line: ATV18
 
Environment: All
 
Cause: N/A
 
Resolution: Yes, in level 2 paramters disable the bra function which stands for brake ramp adaptation.


 

Who is stocking Elliwell products ?

Smith Elements & Controls  - 0800 437 638

 

What is the IP rating of the 437PS plug and socket set coupling?

There is no IP rating available for this product.

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=437PS.

 

Can the Switching frequency be adjusted to 5Khz on the Altivar ATV18?

Issue:  Can the Switching frequency be adjusted to 5Khz on the Altivar ATV18?
 
Product Line:  ATV18
 
Environment:  All
 
Cause:  Switching frequency
 
Resolution:  The unit can be adjusted to 5Khz by setting SRf, you must also derate the unit by 5% at that point.


 

Replaced ATV16 and need to know where is the FW terminal on the Altivar ATV18 drive?

Issue: Replaced ATV16 and need to know where is the FW terminal on the Altivar ATV18 drive?
 
Product Line: ATV18
 
Environment: All
 
Cause: Control wiring
 
Resolution: The FW terminal on ATV16 is same as LI1 on ATV18.


 

What is the ambient temperature the Altivar ATV18 drive can run in?

Issue: What is the ambient temperature the Altivar ATV18 drive can run in?
 
Product Line: ATV18
 
Environment: All
 
Cause: N/A
 
Resolution: The maximum ambient temperature is 104 deg F without the grey tape removed. The maximum ambient temperature with the grey tape removed is 122 deg F. The degree of protection goes from IP31 to IP20 when the grey tape is removed.


 

Will the 437PR plug coupling ring screw on to the 56 series socket outlets?

Yes, this part will screw on to the 56 Series oulets as well as the 473P.

Some of the key features are:
  • Female threads 2 inch B.S.P (11 T.P.I.), suits 439 Series, 437R Coupling Ring, Single Phase 56SO310 Series sockets, 56C310 Series combinations and SS15 Series suspension switch sockets.
For further information is https://www.clipsal.com/Trade/Products/ProductDetail?catno=437PR


 

How do you install an Isolated Extension Cable with a Share-UPS?


Issue

Need assistance on installing the Isolated Extension Cable (IEC) with a Share UPS.


Product Line

 
  • UPS Management
    • Share UPS (AP9207)
    • Isolated Extension Cable (AP9825)
       
Environment
 
  • All applications

Cause

Proper installation is required or else the device may not function as expected.

Resolution

Excerpt from the user's manual:


Accessory Guidelines

  1. Do not use more than one Isolated Extension Cable in a series data path.
  1. The UPS ON command is not supported when an APC accessory generating the ON command is connected at the server end. If you want to ensure UPS ON capability, connect the accessory to the UPS end.
    (You can use the accessory's Advanced Port or one of its Basic Ports.)
  1. The Isolated Extension Cable operates at 2400 baud. Some devices, such as the PowerNet SNMP Adapter or Network Management Card 2 can run at higher rates. Locate these devices such that the Isolated Extension Cable is not in line with them, or set the device to operate at 2400 baud.
  1. Use of the Isolated Extension Cable is not supported when it is connected between a Control-UPS/400 (APC Part Number AP9012) and the AS/400 server**. When using the Isolated Extension Cable with a Control-UPS/400, connect the Isolated Extension Cable between the Control-UPS/400 and the UPS.

**The Control-UPS/400 is no longer manufactured by APC and is discontinued.