Quantcast

Clipsal Iconic Push Button Wiser Switch Mechanism 10A, ControlLink, 3-Wire

Vivid White | Clipsal Iconic Push Button Wiser Switch Mechanism 10A, ControlLink, 3-Wire

Clipsal Iconic Push Button Wiser Switch Mechanism 10A, ControlLink, 3-Wire

Item Number: 41E10PBSWM-VW

Retail
$161.00
RRP (Inc. GST)

The Clipsal Iconic Push Button Wiser 10A ControlLink Switch Module gives you additional control for your loads. Working with the Wiser app, the ControlLink Switch Mechanism gives you 24 hour timer and 24/7 scheduling functions. Use the wall switch, or your smart phone app.

Product Dimensions

Width icon

Width48 mm

Height icon

Height22 mm

Embedding depth icon

Embedding depth70 mm

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-
Clipsal Iconic 3025 exploded view
3043G Rear Perspective
Iconic Switch Grids Exploded Back

Specifications

Design

Product brand

Clipsal

Range

Iconic

Product or component type

electronic switch

Colour tint

vivid white (VW)

Sustainable offer status

Green Premium product

Physical

Range compatibility

  • Clipsal Iconic cover plate
  • Pro Series cover plate
    • Device presentation

      mechanism

      Load type

    • dimmable LED lighting driver: 10 A
    • LED lighting driver (non-dimmable): 10 A
    • electronic transformer: 10 A
    • medium voltage halogen lamp: 10 A
    • linear fluorescent ballast: 10 A
    • inductive: 6 A (cos phi =0.6 )
    • resistive: 15 A
    • motor: 10 A
      • [Ue] rated operational voltage

        220...240 V AC 50 Hz

        Protection type

      • over temperature protection
      • thermal protection
        • Local signalling

          LED

          Control type

        • push-button
        • by mobile application
        • multi-way control via ControlLink
          • Wiring configuration

            3-wire

            Mounting support

            grid

            Device mounting

            flush

            Fixing mode

            clip-in

            Fixing center

            84 mm

            Type of installation

            indoor installation

            Embedding depth

            70 mm

            Depth

            56 mm

            Width

            48 mm

            Height

            22 mm

            IP degree of protection

            IP20

            Relative humidity

            5-90 % non-condensing

            Standards

          • AS/NZS 60669.2.1 safety
          • AS/NZS 60669.2.1 EMC
          • AS/NZS 4268 radio
            • REACh Regulation

              Reference contains Substances of Very High Concern above the threshold

              EU RoHS Directive

              Compliant

              Mercury free

              Yes

              RoHS exemption information

              Yes

              China RoHS Regulation

              Product out of China RoHS scope. Substance declaration for your information

              Environmental Disclosure

              ENVPEP2001003EN

              Circularity Profile

              ENVEOLI2001003EN

              Material

              Material

              plastic

              Others

              Number of ways

              5 ways

              Software name

              Wiser by SE App

              Maximum number of connected devices

            • 3 (switch)
            • 2 (ControlLink module)
              • Cable length

                50 m for ControlLink module

                Technology type

              • bluetooth low energy default
              • Zigbee
                • Memory description

                • backup memory - date and time for 6 h
                • backup memory - program for indefinite period
                  • Show all specifications

                    Frequently Asked Questions

                    hide show

                    What do the different colours of LED indication on my Wiser switches mean?

                    Common colour LED indications on the products -  41E10PBSWM, 41EPBDWCLM, 41E2PBSWM, 41E10PBSWMZ, 41EPBDWCLMZ, 41E2PBSWMZ:

                    Flashing Amber - Mechanism is in Zigbee and is currently in pairing mode, is not connected to a Hub
                    Flashing Green - Mechanism is in Zigbee and is in pairing mode, is already connected to a Hub
                    Solid Green - Mechanism is in Zigbee and is already connected to a Hub that is currently scanning for other mechanisms/devices
                    Flashing Red and Green - Mechanism is in BLE and is in pairing mode
                    Solid Amber - Mechanism is in Zigbee mode and not connected to a Hub
                     

                    How do I swap my Wiser connected switch and dimmer devices from BLE to Zigbee?

                    To swap from Bluetooth to Zigbee you will need to short press the mechanism 12 times - and allow time for the device to swap modes, this will take roughly 40 seconds. Initially when swapped to Zigbee mode the LED indicator on the mechanism will flash amber indicating it is in pairing mode. If not paired to after roughly 50 seconds this will become solid amber. This amber indicator will remain on until paired with a Hub, the mechanism will function as normal while this indicator is on.

                    NOTE: Before swapping from Bluetooth/BLE to Zigbee it is strongly recommended that a factory reset be performed on the mechanism before initiating the change.
                     

                    How long will my Bluetooth/BLE mech stay connected after I access it in the Wiser by SE app?

                    There are 3 different times linked to different situations
                    1. When you exit the specific device control panel and stay in the device list, the device will be disconnected after 30 seconds.
                    2. In the device control panel, if no operation has been detected, the device will disconnect after 5 min.
                    3. If you run the App in the background or lock the screen, the Bluetooth will be disconnected immediately.
                     

                    In the Wiser by SE App, why is my device/s (BLE/Zigbee) greyed out?

                    Check if you have changed the device/s from BLE to Zigbee mode. Once the mode is changed, the device will lose connection and require manual deletion.

                    Zigbee – Check that your router, device and Hub are powered. If you are not connected to the local WiFi associated with the Hub you will also need to check if your router and hub are still connected to the internet.

                    BLE – Check if you are in range of the device and does the device still have power
                     

                    What can I do to solve connectivity issues with my Iconic Bluetooth switches (41E10PBSWM and 41EPBDCLM)?

                    If you are experiencing connectivity issues here is a list to check that can help resolve issues.
                     
                    Is the product Bluetooth capable? 
                    Check your product code and its instructions for confirmation

                    Is your Bluetooth on and is your phone/device currently connected to any other Bluetooth devices?
                    If you are currently connected to another Bluetooth item it is recommended to disconnect.


                    Are you in range of the product?
                    You should be within 8-10m or be in the same room but it is recommended to stand directly in front of the product.


                    Are there multiple Bluetooth capable products in a 2 or 3 gang switch plate?
                    If so, the recommendation is that in a 2-gang plate the top mechanism should be rotated upside down OR in a 3-gang plate rotate the middle mechanism upside down. This can limit interference caused by have the BLE antenna lined up in all the mechanisms.


                    Is the indicator LED solid Amber/Orange and flashing the same colour when in pairing mode?
                    The mechanism is in Zigbee mode and will not pair via Bluetooth. 


                    Have you previously connected to the product using the same phone/device?
                    Make sure the product has been removed from the App and check your phone/device Bluetooth settings and remove it from there also if present.


                    After all these checks are completed and you are ready to attempt the pairing procedure it is recommended to carry out a factory reset and then power cycle the mechanism. It can also help to restart the App or a full restart of your phone/device

                    Note: For all information on how to put a product into pairing mode and do a factory reset please refer to the installation instructions for the specific product.
                    image.png
                     

                    What mechs are needed for 2-way switching in the Iconic range?

                    Show More
                    Exploded view of the Clipsal Iconic skins range; Styl, essence and Standard.

                    Range

                    Customisable and future-ready

                    Iconic is based around a unique, electrically safe grid plate, with a choice of three different skin designs that simply clip on top.

                    Once the grids have been installed by an electrician, it’s safe for anyone to change the skins at any time. Simply clip off the standard skins and clip on the new design.

                    Interchangeable standard, Styl and Essence skins provide great options to customise to suit specific decor and lifestyle.