Yes part number 413 is available in Black.
No it doesn't come with a back plate. You will need a 413NP
Some of the key features are:
- For the use of cable ties for cable clamping
- Not suitable for 414/4P
- For 410, 413 and 414 products
- AS3100, AS/NZS3112, AS3109 Certified
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=413NP
Diameter for part number 412 is 47mm.
The diameter for part number 412 is 47mm.
What does the 412 suffix mean on the ATV312 drives?
Cannot find source in the USA
Suffix 412 indicates a special ATV312 for solar photovoltaic applications.
It is not marketed in the USA. Please contact your OEM for suggested replacements.
The part number for leads to suit 493 is a 493L.
The EXECs rev 2.43 and 2.44 for the Quantum CPU 113 02 / CPU 113 03 / CPU 213 04 (q186v243.bin, q186v244.bin)
- and CPU 113 02S /CPU113 03S / CPU 213 04S (q1sv243E.bin and q1sv244E.bin) use a wrong time base.
The time base is about 20% too fast.
The bug results in wrong time behavior of:
- System functions like Online PLC scan time and the application watch dog timer.
- All time dependent IEC-EFBs like TON, TOF, FREERUN, SYSCLOCK etc.
- All time dependent LL984-Instructions like T.01, T0.1, T1.0, PCFL etc.
The internal RTU time (Time of Day clock) is not affected.
Previous Concept 2.6 SR4 (PN:33002308.07) contained the EXEC version 2.43.
Meanwhile the Concept V2.6 SR 4 CD has been updated. PV08/RL08 contains EXEC rev 2.45
Patch B for Concept 2.6 SR4 contains the EXEC version 2.44.
Patch C for Concept 2.6 SR4 contains the EXEC version 2.45.
Use EXEC rev 2.45 (q186v245.bin or q1sv245E.bin) or higherThe EXEC s also are available on www.telemecanique.com
Legacy KB System (APS) Data: RESL192127 V1.0, Originally authored by EcMO on 06/12/2008, Last Edited by EcMO on 06/12/2008
Related ranges: Modicon Quantum
Clipsal Socket part number - 410
Not available as a spare part, you will need to replace the complete unit.
The replacement for the LC1D1810 at 415 volt is the LC1D18N7.....comes with 1 N/O and 1 N/C auxiliary already fitted as standard.
No, but you can get the lead kit by itself
What are the operating and storage temperatures for a U-line starter?
Digest 177 Section 18 : Contactors and Starters IEC
North American Products
Storage temperature: -40 to +185 degrees F (-40 to +85 degrees C).
Power bases with standard and advanced control units: -13 to +158 degrees F (-25 to +70 degrees C). (At temperatures above 60ﾰC and up to 70ﾰC, for starter-controller LUB32, leave a minimum gap of 9 mm between products).
Power bases with multifunction control units: At temperatures from -13 to +113 degrees F, gap not required between products; at temperatures from 113 to 131 degrees F, allow a minimum gap of 9mm between products; at temperatures from 131 to 140 degrees F, allow a minimum gap of 20mm between products.
Yes..The MBP_MSTR operation 15 is a supported operation for the Unity Momentum PLC programmed with Unity Pro v13 and firmware v2.00.
No. The other options for end plugs are on pages 113 and 116 of the 2014 Clipsal Pocketbook.
The PDL 58 is obsolete, there is no direct replacement.
Customer is calling to confirm alarm codes: 712 & 713 (AC&DC Int Config Fit Service Alarm)
Conext CL 18000NA Conext CL 25000NA Conext 20000E Conext CL 25000E
On site troubleshooting
Internal configuration on control processor is incorrect (firmware issue)
Reset by turning off DC and AC
Upgrade the firmware (2.6.4 or newer)
Ensure Bootloader (Control Boot) firmware is 2.02.03 or newer
Issue: How can you get to level 2 parameters in the Altivar ATV18?
Product Line: ATV18
Resolution: You have to use the arrow key to get to the L2A parameter which you then change to yes and then access is permitted.
No. The XBTGT series uses a standard 4:3 aspect ratio, and Vijeo Designer does not have the ability to change it to 3:4(portrait).
Yes. Calibration service is offered via Customer Care phone 0800 652 999. Similar method to RMA's.
Nothing - you will need to order the leads (493L) and shoulder bag/pouch (493SB) as separate products.
Product Line: ATV312
Environment: Part numbers ending in 410
Resolution: This is a custom modified version of the ATV312 that is only sold to the customer who had it customized.
A standard ATV312 will not work in it's place. It has to be ordered through the OEM.
Product Line: 410, Single axis servo positioner
Resolution: There is no direct plug-in replacement for the 410 family of single axis servo positioners. Migration to Lexium 32 series drives is the general recommendation. Regardless of whether the 410 drive is used in a standalone application (or) is a remote drop on a PLC, a Lexium 32M drive may be used as replacement. 410-2 being a 10 A drive (continuous current), a LXM32MD30N4 would be an ideal replacement. If the existing motor is deemed compatible, then a resolver option card may be used to commutate the existing motor. If the 410 drive is used as a remote drop on a PLC exchanging data, an Ethernet option module may be used for communication with the PLC over Modbus/TCP.
Application specific information would be required for a more accurate listing of replacement parts.
Issue: Do you get the lockable handle on all of the 8636, 8638 and 8639 enclosed Altistart ATS46 units?
Product Line: Enclosed ATS46
Resolution: Do not get this on the 8636 since there is no disconnect in the starter but is on the other enclosure types.
No , Due to recent design and standards changes it now comes with only a 1.8m lead. As yet not all Documentation has been updated to reflect this change .
For more information in regards to this product range please visit the Clipsal web site on the link provided
Tutorial for adding the Modicon M218 PLC (programmable logic controller) to SoMachine via firmware update in Configuration Manager.
What is the COMAND and CONTROL selections in the ETZ 410 version 1.7 used for.
The TSX ETZ410 version 1.7 web page menu functions 'COMMAND' and 'CONTROL' are only used when the connected device has the capability to use these functions. The instructions for using these functions can be found in the assocaited user manual for the attached device (i.e., Ativar 71). These functions are not supported on Premium devices (i.e., ETY, ETZ, etc.).
This article explains how the default WebX ports can be changed for the redesigned WebX interface in ClearSCADA 2015 R1 and later versions. The default ports are set to 85 for HTTP (non-secure) and 453 for HTTPS (secure) connections. This configuration can be altered from Microsoft Internet Information Services (IIS) Manager.
To change the default ports do the following:
1. Launch Internet Information Services (IIS) Manager on the machine hosting ClearSCADA Server.
2. Locate the ClearSCADA site and click on Bindings.
3. Select the connection you would like to edit and hit the Edit button.
4. Type the desired port number and hit OK. Make sure the new port is vacant and can be accessed by the clients. Please do not set the same ports for WebX and the Original WebX. The appropriate SSL Certificate can also be selected for the secure port (HTTPS) at this stage.
5. Restart the ClearSCADA site by clicking on Restart located in the Manage Website section.
||Keep in mind that the secure WebX port in ClearSCADA 2015 R1 is also being used by ClearSCADA Mobile if it is installed on the same machine. ClearSCADA Mobile uses port 443 by default in all ClearSCADA versions prior to 2015 R1 and in newer.
The Spark-e-mate is not required to be routinely calibrated, but if calibration is required (as per ECANZ) please consult Design 2000 Pty Ltd Melbourne, Victoria. There will be a charge involved.
Spark-e-mate instructions attached.
The item can be upgraded by returning to the manufacturer - Design2000.
The below link has details for the RMA process with Design2000 where the customer could get the unit updated.
All callibration and services regarding the 493 Sparke mate range is done via a third party manufacturer Design2000.
Phone: +613 97585933
9-11 Rose St PO Box 7020
Upper Ferntree Gully, Melbourne, Victoria, 3156
Power loss of our RFI filter VW3A58407 and VW3A58408.
This information is not available for the moment.
401 = 5 w
402 = 11 w
403 = 11 w
No information for 407 and 408.
Legacy KB System (APS) Data: RESL156483 V3.0, Originally authored by on , Last Edited by on
Related ranges: Altivar 58
Are replacement AC coil available for CAD32 and CAD50 relay?
Volt = coil part number
12 = LXD1J7
21 = LXD1Z7
24 = LXD1B7
32 = LXD1C7
36 = LXD1CC7
42 = LXD1D7
48 = LXD1E7
60 = LXD1EE7
100 = LXD1K7
110 = LXD1F7
115 = LXD1FE7
120 = LXD1G7
127 = LXD1FC7
200 = LXD1L7
208 = LXD1LL7
220/230 = LXD1M7
230 595 21 LXD1P7
230/240 = LXD1U7
277 781 30 LXD1W7
380/400 = LXD1Q7
400 = LXD1V7
415 = LXD1N7
440 = LXD1R7
480 = LXD1T7
600 = LXD1X7
690 = LXD1Y7
PowerLogicSystemManager Software Upgrade Notes
Important Note for SMS 4.3 Upgrades
Legacy KB System (APS) Data: RESL204981 V1.0, Originally authored by MaTh on 03/31/2011, Last Edited by MaTh on 03/31/2011
Related ranges: System Manager 4.3
Power Draw of NetBotz 420 devices
NetBotz v2 (NB)
The NetBotz model 420 typically draws about 1.0 amps. The Model 420 will draw maximum of 1.5 amps.
The lead length on the E13 in electric orange is 3 meters long
Some of its key features are:
- Overload protection
- Amber power available neon
- 3 metre power cord
- In-built indicator to indicate whether an RCD or MCB fault has occurred
- In-built test facility
- 10 mA trip current
- Trip Time: < 40ms
- Operating Temperature Range: -10 to 55 deg C
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=E13
Issue: What are the dimensions and weight for the ATV31HU11M2, ATV31HU15M2, ATV31HU22M3X, ATV31H037N4, ATV31H055N4, ATV31H075N4, ATV31HU11N4, ATV31HU15N4, ATV31H075S6X or ATV31HU15S6X?
Product Line: ATV31
Environment: ATV31HU11M2, ATV31HU15M2, ATV31HU22M3X, ATV31H037N4, ATV31H055N4, ATV31H075N4, ATV31HU11N4, ATV31HU15N4, ATV31H075S6X or ATV31HU15S6X
Resolution: This is the size 6 and the dimensions are:
Width = 4.13 inches 105 mm
Height = 5.63 inches 143 mm
Depth = 5.91 inches 150mm
The weight is 2.92 lbs (1.35 kg)
User wishes to know how long it takes the digital input for ZSI to be recognized by Sepam relay
Sepam series 20
Sepam series 40
Sepam series 80
It takes approximately 13 ms (one cycle time of the control reading) operating time for the relay to recognize and react to an input change.
Note: For a Sepam series 20, only input I13 can be used to receive a blocking reception.