Diameter for part number 412 is 47mm.
The diameter for part number 412 is 47mm.
What does the 412 suffix mean on the ATV312 drives?
Cannot find source in the USA
Suffix 412 indicates a special ATV312 for solar photovoltaic applications.
It is not marketed in the USA. Please contact your OEM for suggested replacements.
Yes part number 413 is available in Black.
Socket to suit is 402 series
The only option is the NR12 - part number 52449
No, unfortunately there is no base avaliable for this product as it was designed to mount directly to a ceiling. However there is an adaptor plate avaliable which acts as a base, the part number is 150
. Some of its key features are:
- Suits round junction boxes, surface mounting accessories, 342 Ceiling Switches, 412 Series Surface Sockets and surface mounting products with 46 mm and 38 mm dual mounting centres
- Mounting Centre: 38mm & 46mm
- 77 mm Diameter x 3 mm Depth
For further information please visit https://www.clipsal.com/Trade/342&adaptplaes/
The 438/2 does suit the 492.
The female version is 438/2
No it doesn't come with a back plate. You will need a 413NP
Some of the key features are:
- For the use of cable ties for cable clamping
- Not suitable for 414/4P
- For 410, 413 and 414 products
- AS3100, AS/NZS3112, AS3109 Certified
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=413NP
A 452 error indicates the meter had an abnormal power cycle. It does not indicate why the meter had the abnormal power cycle.
For most meters with a single abnormal power cycle (ie. an associated 452 error), it is suggested the customer should continue to monitor it. The customer may choose to upgrade the meter to latest firmware, which has improved diagnostics ability for future investigation.
For further issues with the 452 Error please contact your local Tech Support.
Dimensions = PAN16 - showing total width as 232 - Height = 432
The 492 is designed to suit 2 core 1mm2 ordinary duty flex while the 492Y is designed to suit 0.75mm2 figure 8 flex.
For more information regarding this and similar products please follow the link provided to the Clipsal website.
Clipsal Socket part number - 410
The F12 fault is used to detect whether the motor is connected to the drive power output. ( X9 connector).
To disable this feature, set the parameter CPHASE to zero.
Legacy KB System (APS) Data: RESL156769 V1.0, Originally authored by on , Last Edited by on
Related ranges: Lexium MHD
The replacement for the LC1D1810 at 415 volt is the LC1D18N7.....comes with 1 N/O and 1 N/C auxiliary already fitted as standard.
Our LC1D09 to LC1D1506 have to be ordered with a coil voltage. They are not sold less coil. Coil voltages can be found on H12 in the A4 Catalogue.
Issue: What is the CSA file number for the Altivar ATV18 unit?
Product Line: ATV18
Resolution: The CSA number is LR96921.
Identifying characteristics from part numbers
XCKD, XCKD, XCKT limit switches
ZCD, ZCP, ZCT limit switches
It is necessary to have the appropiate conduit entry on a limit switch
For a complete limit switch (XC devices) use the following suffixes:
P16 - ISO M16
P20 - ISO M20
G11 - Pg11
G13 - PG 13.5
N12 - 1/2" NPT
F12 - PF 1/2" NPSF
D44 - Deutch Connector
For the adapter to fit with a metallic limit switch body (ZCD devices) order the following pieces:
ZCDEP16 - ISO M16
ZCDEP20 - ISO M20
ZCDEG11 - Pg11
ZCDEG13 - PG 13.5
ZCDEN12 - 1/2" NPT
ZCDEF12 - PF 1/2" NPSF
For the adapter to fit with a plastic limit switch body (ZCP, ZCT devices) order the following pieces:
ZCPEP16 - ISO M16
ZCPEP20 - ISO M20
ZCPEG11 - Pg11
ZCPEG13 - PG 13.5
ZCPEN12 - 1/2" NPT
ZCPEF12 - PF 1/2" NPSF
ZCPED44 - Deutch Connector
In 24 KV SF Circuit Breaker range, the weight of the SF6 gas per pole for different Circuit Breakers is as follows:
- SF1 Type 1 – 49 grams
- SF1 Type 2 – 112 grams
- SF2 – 240 grams
Yes, the 612 cover plate suits the PDL 617BT2/2. There are Polished Brass (MPB), Brushed Bronze (MBBZ) and Stainless Steel (MSS).
Code example (617BT2/2 cover in Polish Brass): PDL 612MPB
The PDL 58 is obsolete, there is no direct replacement.
What is the parts breakdown for the 9001K2L38GH13?
NEMA1,3R, 4,12 IP55 ,IP66
The component parts are stock
The part number for the 512 Mb Compact Flash card is MPCYN00CFE00N
Legacy KB System (APS) Data: RESL174338 V1.0, Originally authored by on , Last Edited by on
Related ranges: Magelis Smart iPC
Schneider does offer pre-made cables with M12 on device side and RJ45 on Ethernet switching port side.
The model TCSECL1M3M10S2 is a 10 meter long cable. (see attached data-sheet)
The connectors that mate to the drive can also be ordered separate using reference number VW3L5K000
VW3L5K000 is a kit and will come with 2 males connectors M12 4 pin D coded and 1 M12 protective cap ( used to terminate last device in network ), for building your own comunication cables.
APC by Schneider Electric used to have several optional PDUs for use with the Matrix-UPS to provide greater flexibility of electrical connections. All PDU options for the Matrix have been discontinued now for over a decade.
Product Line: ATV312
Environment: Part numbers ending in 410
Resolution: This is a custom modified version of the ATV312 that is only sold to the customer who had it customized.
A standard ATV312 will not work in it's place. It has to be ordered through the OEM.
Customer is calling to confirm alarm codes: 712 & 713 (AC&DC Int Config Fit Service Alarm)
Conext CL 18000NA Conext CL 25000NA Conext 20000E Conext CL 25000E
On site troubleshooting
Internal configuration on control processor is incorrect (firmware issue)
Reset by turning off DC and AC
Upgrade the firmware (2.6.4 or newer)
Ensure Bootloader (Control Boot) firmware is 2.02.03 or newer
This proximity Sensor requires a 4 pin M12 female connector, the item required will depend on the environment.
The part code for a 4 pin M12 pre wired female straight connector with PVC flex is XZCPV1141L5 (angled option = XZCPV1241L5)
The part code for a 4 pin M12 pre wired female straight connector with PUR flex for severe environments is XZCP1141L5
The part code for a 4 pin M12 pre wired female straight connector for food & beverage applications is XZCPA1141L5 (ANGLED OPTION = XZCPA1164L5)
2 or 10m options may also be available
See attached data sheet
The part numbers for SoMachine 4.2 software are:
- SOMNACCZXSPAZZ - SoMachine V4 License Single - Single (1) License with Mandatory registration
- SOMNACCZXTPAZZ - SoMachine V4 License Team - Team (10) License with Mandatory registration
- SOMNACCZXEPAZZ - SoMachine V4 License Entity - Entity (100) License with Mandatory registration
Note: the part numbers for SoMachine 4.3 are the same, the customer will have to specify that he wants version 4.2
Product Line: 410, Single axis servo positioner
Resolution: There is no direct plug-in replacement for the 410 family of single axis servo positioners. Migration to Lexium 32 series drives is the general recommendation. Regardless of whether the 410 drive is used in a standalone application (or) is a remote drop on a PLC, a Lexium 32M drive may be used as replacement. 410-2 being a 10 A drive (continuous current), a LXM32MD30N4 would be an ideal replacement. If the existing motor is deemed compatible, then a resolver option card may be used to commutate the existing motor. If the 410 drive is used as a remote drop on a PLC exchanging data, an Ethernet option module may be used for communication with the PLC over Modbus/TCP.
Application specific information would be required for a more accurate listing of replacement parts.
A trip circuit fault is displayed on the front face of the SEPAM.
SEPAM 20, 40, 50, 80
The trip circuit fault on a SEPAM relay is caused by:
1. Circuit breaker control is enabled but the contacts I11 and I12 are not connected, or are connected incorrectly.
2. Circuit breaker control is enabled but the contacts I11 and I12 don't transfer within 200ms.
3. Circuit breaker control is disable but contacts I11 and I12 are assigned to the open and closed status from the breaker.
Note: If SEPAM 80 Series is being used I11 = I101 and I12 = I102.
To correct the issue, connect to the relay using SFT2841 then:
Case 1. Wire the breaker status contacts to I11 and I12 or wire these contacts correctly.
Case 2. Go to the program logic screen in SFT2841 and reassign I11 and I12 to either customized use if they are being used, or to not used if the contacts are not wired
Note: Until the fault has been cleared, the relay will continue to show the Trip Circuit Fault on the front display.
To clear the fault from the front display, do the following:
1. Press the Alarm button.
2. Press the Enter key.
3. Press the Clear button to clear the fault.
To clear the fault using SFT2841, do the following:
1. Connect to the relay
2. Click the Alarm button
3. Click the Reset button
Electrical Distribution Equipment
Finger Cluster (Each) S33166
Cluster Grease (12 oz. Tube) S48899
To create a SoMachine archive in SoMachine v4.1 or 4.2 you will have to navigate to SoMachine Central / top-left green button / Save Project as... / Save Archive...
Proper Formats for Phone Numbers When Using Send Wireless SMS Message Alert Action from Netbotz appliance.
NetBotz version 2 using sms.
When using the Send SMS Message alert action, the GSM phone number of an alert recipient can be entered in the local format or in international format.
Example of local format when a NetBotz appliance is configured to send SMS to a GSM phone number within U.S.:
Where 512 is a U.S. area code.
Example of international format when a NetBotz appliance in U.S. is configured to send SMS to a GSM phone number in Australia:
Where 61 is the Australia country code, 414 is an area code, and + sign must be used to indicate that it is in international format.
How to perform database maintenance in SMSPE 4.2 and 4.3
System Manager Software(SMSPE) 4.2 & 4.3
System Manager Software Database Maintenance
Refer to the attached document and tools for information on database maintenace for SMSPE 4.2 and 4.3.
140-XTS-002-xx cable is rated for .5 Amps per point (read as point 5 Amps)
140-XTS-012-xx cable is rated for 2 Amps per point (read as 2 Amps)
The following table outlines the different Cablefast cables, their description, and rating:
140 XTS 002 03 3 foot cable with sub "D" connector Standard power .5 Amps
140 XTS 012 03 3 foot cable with sub "D" connector High power 2 Amps
140 XTS 002 06 6 foot cable with sub "D" connector Standard power .5 Amps
140 XTS 012 06 6 foot cable with sub "D" connector High power 2 Amps
140 XTS 002 09 9 foot cable with sub "D" connector Standard power .5 Amps
140 XTS 012 09 9 foot cable with sub "D" connector High power 2 Amps
140 XTS 002 12 12 foot cable with sub "D" connector Standard power .5 Amps
140 XTS 012 12 12 foot cable with sub "D" connector High power 2 Amps
140 XTS 102 06 6 foot cable with pigtail leads High power 2 Amps
140 XTS 102 15 15 foot cable with pigtail leads High power 2 Amps
Note: the quantum line will be going obsolete 12/31/2018 and the M580 is the recommended replacement.
XUSL4E type 4 safety light curtains and obsolete XUSLD/B light curtains use similar M12 connectors with the same pin number, on each part of the light curtain. Both side of the obsolete cabling accessories need to be changed for the new curtain XUSL4E connection. Attached document precising how to re-use the obsolete XSZBCT/R pre-wired M12 connectors with the new XUSL4E safety curtain.
XUSL4E type 4 safety light curtains and obsolete XUSLP equivalent light curtains use similar M12 connectors with the same pin number, on each part of the light curtain. Both side of the obsolete cabling accessories need to be changed for the new curtain XUSL4E connection. Attached document precising how to re-use the obsolete XSZPCT/R pre-wired M12 connectors with the new XUSL4E safety curtain.
The cord on the E12 RCD/ MCB switched twin socket outlet is 3 meters long
Some of its key features are:
- Overload protection
- Amber power available neon
- 3 metre power cord
- In-built indicator to indicate whether an RCD or MCB fault has occurred
- In-built test facility
- 10 mA trip current
- Trip Time: < 40ms
- Operating Temperature Range: -10 to 55 deg C
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=E12
Yes, place CK on the end of the part number and the switch will be provided with a 60103 Low and Fletcher Key.
Some of the key features are:
- Standard security KSW
- 107 mm Height x 101 mm Width x 112 mm Depth
- M250 rating
- 25 - 10 AWG conductor terminal
- Less enclosure
- For Locking In Only The Off Position
- Dust-resistant, hoseproof and UV resistant
- Safety in operation
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=56K1SW220