CONNECTOR RJ45 CAT6 UNSHIELDED

Clipsal Iconic - Modular Socket, Category 6, UTP, RJ45, Unshielded, Translucent

Catalogue Number: 40RJ45SMA6-TN
CONNECTOR RJ45 CAT6 UNSHIELDED
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Range
Actassi
Product or component type
RJ45 network socket
Device presentation
two piece design
Colour tint
  • stuffer cap: transparent (ABS + PC)
  • IDC cover: blue (ABS + PC)
  • connector housing: translucent (ABS + PC)
    • Colour code
      568 A/B
      Quantity per set
      set of 1
      [In] rated current
      1.5 A at 25 °C
      Permissible voltage
      1000 V AC/DC peak, between contacts
      Contact resistance
      20 mOhm
      Insulation resistance
      initial insulation resistance: > 500 MOhm at 100 V DC
      AWG gauge
      AWG 23...AWG 24
      Mechanical durability
      750 cycles
      Coupling attenuation
    • >= 35 dB at 30-100 MHz
    • >= 75 - 20 x log(f) dB at 100-1000 MHz
      • Pin number
        8 pins of copper alloy and gold plated conforming to IEC 60603-7
        Pulling force
        50 N during 60 s
        Transverse conversion loss
      • >= 50 dB
      • >= 68 - 20 x log(f) dB at 1-250000 kHz
        • Tool type
        • punch down tool
        • quick termination tool
          • Cable outer diameter
            0.9-1.1 mm
            Cable shielding type
            U/UTP
            Communication network category
            6
            Communication network type
            1000BASE-T
            Communication port protocol
          • PoE+ (Power over Ethernet)
          • VoIP (Voice IP)
            • Product compatibility
            • RJ45 plug
            • RJ11 plug
              • Transmission frequency
                0-250 MHz
                Type of footprint
                40 mech
                Height
                22 mm
                Length
                36 mm
                Width
                16 mm
                Ambient air temperature for operation
                -40-70 °C
                Climatic withstand
                40/070/21 (21 days)
                Environmental characteristic
              • PEP (Energy depletion)
              • REACH
                • Product certifications
                  RCM
                  Standards
                • ANSI/TIA-568-C.2
                • AS/NZS 3080
                • AS/CA S008
                • ISO/IEC 11801
                • IEC 60603-7-4
                  • EU RoHS Directive
                    Not applicable, out of EU RoHS legal scope
                    Warranty
                    18 months

                    Documents & downloads

                    hide show
                    Filter items
                    • All

                    • Product Brochures

                    • CAD Files and Packs

                    • Technical Data Catalogues

                    • Installation Instruction

                    • Operating Manuals

                    • Specifications

                    • Certificates (MSDS)

                    Frequently Asked Questions

                    hide show

                    What is part number for Iconic CAT6 data mech?

                    The part number for Iconic is a - 40RJ45SMA6-VW.

                    What is the IP rating of the Cat6 shuttered mechanism part number 30RJ45SMA6SH?

                    The 30RJ45SMA6SH is IP22 rated.

                    For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30RJ45SMA6SH


                    Can we get a Cat 6 data mechanism in blue.

                    Yes , The part number is 30RJ45SMA6-BU.
                    This also comes in various other colours and also a  shuttered version.
                    Please see following link for complete range of colours and documentation.
                    https://www.clipsal.com/Trade/search-results?q=30RJ45SMA6

                    What is part number for BSL plate to accommodate 30RJ45SMA6?

                    Part number BSL31VH can accommodate 30RJ45 jacks.

                     

                    What is the difference between CAT 6 (30RJ45SMA6) and CAT 6A (30RJ45SMA6A)?

                    There isn't much of a physical difference. The only real difference is the twist ratio with in the mechanism. The CAT 6A (30RJ45SMA6A)  has a higher twist ratio there for allowing data to travel at a higher speed.


                     

                    What is the replacement for the 30RJ88SMA6?

                    The replacement is 30RJ45SMA6.

                    What is part number for Saturn plate to suit 30RJ45SMA6?

                    Part number 4031VH will accommodate 30RJ series mech.

                    For more information on this part please refer to http\\:www.clipsal.com/Trade/Products/ProductDetail?catno=4031VH

                    User-added image

                    What is the part number for a data mech for CAT5?

                    The part number for a data mech for CAT5 is - 30RJ45SMA5

                    For further information , visit link below:-
                    https://www.clipsal.com/Trade/search-results?q=30RJ45SMA5

                    User-added image

                    What is the data switch plate in the Saturn series?

                    You use the Saturn communication plate, ie: 4031VH-PW and put a 30 series mech in it such as the 30RJ45SMA6-WE.

                    Is part number 30RJ45SMA6 available in Soft Grey?

                    Part number 30RJ45SMA6 is Standard in Soft Grey.

                    What is the part number for a data outlet in the ZEN range?

                    The part number for a data outlet in the ZEN range is - Z4031VH & 30RJ45SMA6

                    For further information visit link below:-
                    https://www.clipsal.com/Trade/search-results?q=Z4031VH
                    https://www.clipsal.com/Trade/search-results?q=30RJ45SMA6
                    User-added image

                    What is the part number for a data outlet in the ZEN range , that uses CAT6?

                    The part number for a data outlet in the ZEN range , that uses CAT6 is - Z4031VH & 30RJ45SMA6
                    For further information , visit links below:-
                    https://www.clipsal.com/Trade/search-results?q=Z4031VH
                    https://www.clipsal.com/Trade/search-results?q=30RJ45SMA6
                    User-added image

                    Is there an adaptor to fit keystone data mechs into clipsal plates?


                    No there is not, there is an option for strato and modena or pdl plates but for clipsal use 30RJ series mechs

                    What is the part number for a keystone, cat6 mech?

                    The part name is as follows: RJ45SMA6-WE.

                    What is the part number for a CAT6A data jack?

                    The part number for a CAT6A data jack is - 30RJ45SMA6A

                    For further information , visit link below:-
                    https://www.clipsal.com/Trade/search-results?q=30RJ45SMA6A
                    User-added image

                    What is the part number for a Cat 6A, shielded, 30 series mech?

                    The Cat 6A, shielded, 30 series mech is the 30RJ45SM6AF.

                    What is the part number for a data outlet in the Zen range?

                    The part number for a data outlet in the Zen range is - Z4031VH & 30RJ45SMA
                    For further information , visit link below:-
                    https://www.clipsal.com/Trade/search-results?q=Z4031VH
                    https://www.clipsal.com/Trade/search-results?q=30RJ45SMA
                    User-added image
                    User-added image
                     

                    Is part number 30RJ45SM6AF available in Black?

                    No. Unfortunately, part is not available in Black

                    for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=30RJ45SM6AF

                    User-added image

                    Is there a data jack that is silver or grey to match the Clipsal 4031VH-OM

                    Can use the Clipsal 30RJ88SMA5-SG while stock lasts

                    What is the part number for a CAT6A jack that is sheilded?

                    The part number for a CAT6A jack that is sheilded is - 30RJ45SM6AF

                    For further information , visit link below:-
                    https://www.clipsal.com/Trade/search-results?q=30RJ45SM6AF
                    User-added image