Yes, there is a mounting block for the 40. The part number is 447.
Some of the key features are:
- Moulded mounting blocks
- With metal inserts
- 3 mounting screw positions
- suits 40, 40D and switches with 115x48 mm flush plates and 98 mm mounting centres
For further information please visithttps://www.clipsal.com/Trade/Products/ProductDetail?catno=447
Power loss of our RFI filter VW3A58407 and VW3A58408.
This information is not available for the moment.
401 = 5 w
402 = 11 w
403 = 11 w
No information for 407 and 408.
Legacy KB System (APS) Data: RESL156483 V3.0, Originally authored by on , Last Edited by on
Related ranges: Altivar 58
No. Unfortunately, the part number 49M is only available in Vivid White.
Yes, but requires the use of proper outdoor/underground cables of the correct build and standard and is not to exceed the maximum length - Xanbus total 40m @ 250kbps.
Requires the use of Ethernet Cable designed for underground use. Can use CAT 5e or CAT 6 JELLY FILLED cable with correct outdoor rating and is compliant with local standards.
No, but a PRA90039 is the least costly lock, supplied with 2 x 405 keys.
Dimension = 409 x 171 x 233
There is not a specific 45A mech - it comes assembled as a complete switch plate in Iconic range.
No unfortunately this part is not available.
The part number for 40mm conduit plug is 220S40-GY.
Issue: Part numbers
Product Line: BMH
The part number for the power cable for a BMH1003 xxxxxx motor is VW3 M5101 Rxxx . where xxx = 15, 30, 50, 100, 150, 200, 250, 500, 750 for cable lengths 1.5m, 3m, 5m, 10m, 15m, 20m 25m 50m and 75 m respectively, The composition of this cable is [(4 x 1.5 mm^2) + (2 x 1 mm^2)] and comes with a pre-made M23 style industrial connector on the motor end and free ends on the drive side.
The part number for the feedback cable for a BMH1003 xxxxxx motor is VW3 M8102 Rxxx where xxx = 15, 30, 50, 100, 150, 200, 250, 500, 750 for cable lengths 1.5m, 3m, 5m, 10m, 15m, 20m 25m 50m and 75 m respectively, The composition of this cable is [(3 x 2 x 0.14 mm^2) + (2 x 0.34 mm^2)] and comes with a pre-made M23 style industrial connector on the motor end and an RJ45 style connector on the drive side.
You can purchase a 955RW, BALS211 + 56CR310 + flex
Yes, the part number is 30M is a -3A.
The part number for Iconic switch mech 40M.
Yes, part number 41E6PBT3SBM can be used as run on Timer when used in conjunction with 40M.
The threaded length is 40mm
Not available as a spare part, you will need to replace the complete unit.
Attached is the SCP4xx Model 400 Processors Instruction Bulletin 30598-503-01
Socket to suit is 402 series
No use a contactor or relay
Maximum 4mm (QC) and 6mm (screwed).
405 Key + Lock for enclosure NSYPLM64B = NSYTL405PLM.
XY2CJS15H29 will suit up to 20m operating cable length.
You will need to use a temperature coupler in the board and a temperature probe outside. Up to 20m limit.
May be suitable but not spec'd. Rather use a 625F which has a minimum load of 40W
The Maximum Load is 500W and the Minimum Load is 40W
The Standard 753 2 wire sensor has a 40W minimum load.
The 753R 3 wire sensor has no minimum load.
There are two , 1 on each end
114mm x 40mm x 44mm (H x W x D)
No unfortunately we don't have 40mm flexible conduit that is sheathed. However we do have standard flexible conduit. The part number is 9040TCM-GY.
Unfortunately we do not have a saddle spacer to suit 261/40, 40mm PVC saddle.
No, however we have a sensor mechanism to suit the PDL range. the part number is 100MPIR.
The part code is 5031NMML
What replacement coils are available for the LC1F500?
TeSys F-Line Contactors
All Product Lines
Can not find it in the Digest
For LX1 standard style coils (most common):
24VAC (40 - 400 hz) = Not Available
48VAC (40 - 400 hz) = LX1FK048
110VAC (40 - 400 hz) = LX1FK110
120AC (40 - 400 hz) = LX1FK110
208VAC (40 - 400 hz) = LX1FK200
220VAC (40 - 400 hz) = LX1FK220
240VAC (40 - 400 hz) = LX1FK240
277VAC (40 - 400 hz) = LX1FK280
380VAC (40 - 400 hz) = LX1FK380
415VAC (40 - 400 hz) = LX1FK415
440VAC (40 - 400 hz) = LX1FK415
480VAC (40 - 400 hz) = LX1FK415
600VAC (40 - 400 hz) = LX1FK600
For LX9 special coils:
24VAC (40 - 400 hz) = LX9FK910
48VAC (40 - 400 hz) = LX9FK917
110VAC (40 - 400 hz) = LX9FK925
120AC (40 - 400 hz) = LX9FK925
208VAC (40 - 400 hz) = LX9FK930
220VAC (40 - 400 hz) = LX9FK931
240VAC (40 - 400 hz) = LX9FK932
277VAC (40 - 400 hz) = LX9FK932
380VAC (40 - 400 hz) = LX9FK936
415VAC (40 - 400 hz) = LX9FK936
440VAC (40 - 400 hz) = LX9FK937
480VAC (40 - 400 hz) = LX9FK937
600VAC (40 - 400 hz) = Not Available
Yes the part number is RCD240/30.
The part number is A9D33640.
No, you could use the Clipsal 461SUA-WE