Clipsal Iconic Bed Rocker 10 Pack

Clipsal Iconic Bed Rocker, 10 Pack

Clipsal Iconic Bed Rocker 10 Pack

Item Number: 40BDR-VW

Retail
$33.55
RRP (Inc. GST)

Easily identify switch designation with the Clipsal Iconic Bed Dolly Rocker. This bed dolly rocker is designed for use with the versatile Clipsal Iconic accessories range and can be used for residential use.

Colour Vivid White (VW)
  • Vivid White 1 PCE

Product Dimensions

Width icon

Width23 mm

Height icon

Height23 mm

Depth icon

Depth9 mm

See full specifications

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range

Clipsal Iconic

Product or component type

rocker

Physical

Quantity per set

set of 10

Marking

BED

Switch function

2 positions

Height

23 mm

Width

23 mm

Depth

9 mm

EU RoHS Directive

Under investigation

Environmental Disclosure

ENVPEP120506EN

Others

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Weight

14 g

Package 1 Height

9.17 mm

Package 1 width

20.39 mm

Package 1 Length

23.25 mm
Show all specifications

Frequently Asked Questions

hide show

What is the difference between SCADAPack 4203DR and SCADAPack 4203DS controllers?

The difference between SCADAPack 4203DR and SCADAPack 4203DS is in analog and digital I/O configuration shown below on the terminal board layout pictures.

What is the dimension of 90BD2 insulating shroud?

The dimension of 90BD2 insulating shroud is 105mm(length) 78mm(width) 65mm(depth). 90BD2 insulating shroud, large type format, deep type, meets double insulation requirements (suits 156/2 metal brackets).
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=90BD2
User-added image

How to connect 4203DR current sinking AOUT to PLC with current sinking AIN?

AOUT on 4203 cannot be connected directly to AIN on the SP350 because both are current sinking type of I/O.
Drawing shown below describes how AOUT on 4203DR transmitter should be connected to AIN on SCADAPack 350 when I-I Isolator is used.
Jumper for analog input on SCADAPack 350 must be in the Current position.

What is the 24 Vdc amp rating on the Compact Twido's?

The 24 Vdc amp rating on the Compact Twido's is 400 mA for the 40DRF and 250 mA on all other Compact Twido's.


NOTE: The Twido has been obsoleted and has been replaced with the TM221 series.

ETSNZ How many charging records can the EVLink webserver hold?

You are able to view the last 30CDR (Charge Detail Record) regardless of the date. It will also store the last 31 days of load. It will write of the last record when it is full.
The export button in the Charge Data Record tab is used to export all the charging sessions (up to 3000) in the station via a .csv file.

 

What would cause the Twido Real Time Clock (RTC) to have the time drift?

The Twido when configuring a Real Time Clock (RTC) it requires the user to go on line to the Twido and go to the Check PLC tab to Configure the RTC. There is a Correction Factor that has to be entered in the software. This is either located on the RTC chip for the low end Twido controllers or next to the 40DRF controllers mini din port on the unit. Once the correction factor is entered and applied at this point the RTC adjustment can now be set and synchronized.

Note: The Twido product line is obsolete and has been replaced with the M221 and SoMachine Basic.

What are the ION6200 options card part numbers?

Issue
What are the ION6200 options card part numbers?

Product Line
ION6200

Environment
Part Numbers

Cause
Looking for the ION6200 series meter options card part numbers.

Resolution
See below the the available ION6200 series meter options cards:
Options card Part Number
1 Standard Measurements Z0A0N
2 Enhanced Package #1 Z0A0P
3 Enhanced Package #2 Z0A0R
4 Standard Measurements, two pulse outputs Z0B0N
5 Enhanced Package #1, two pulse outputs Z0B0P
6 Enhanced Package #2, two pulse outputs Z0B0R
7 Standard Measurements, RS-485 A0A0N
8 Enhanced Package #1, RS-485 A0A0P
9 Enhanced Package #2, RS-485 A0A0R
10 Standard Measurements, two pulse outputs, RS-485 A0B0N
11 Enhanced Package #1, two pulse outputs, RS-485 A0B0P
12 Enhanced Package #2, two pulse outputs, RS-485 A0B0R

Please see the ION6200 Options Card retrofit instructions for how to install the Options Card:

How long can a Twido hold the program when powered down without an external battery?

 

All bases: By lithium internal battery. Backup duration is approximately 30 days (typically) at 25°C (77°F) after battery is fully charged. It take 15 hours to obtain 0 to 90% of the full battery charge. Battery life is 10 years when charged for 9 hours and discharged for 15 hours. The battery cannot be replaced.

40DRF compact bases: By user replaceable lithium external battery (in addition to internal battery onboard). Backup duration is approximately 3 years (typically) at 25°C (77°F) under normal operating conditions of the base (typically, no long-term powering off of the base). BAT LED on front-panel provides indication of battery power status.

Note: The Twido was obsoleted 12/31/2016 and was replaced by the M221.

What does Neg stand for under logic inputs in SFT2841?

Product Line  
SEPAM 20
SEPAM 40
SEPAM 50
SEPAM 80

Resolution   
There is a Neg box for the logic inputs in SFT2841. This option, if checked, allows one to wire the input as a negative input. For instance, 1 is normally considered to be high, if you checked Neg, you would effectively be telling the relay that 0 is high.

 

SEPAM Series 40 and 50 Wiring Diagram

Issue  
Need the wiring diagram for the SEPAM 40 and 50.

Product Line   
SEPAM Series 40
SEPAM Series 50


Resolution   
Attached is the wiring diagram for the all SEPAM Series 40 and 50.

Cutout diagram for the SEPAM 40 and 50.

Issue  
Need the cutout diagram for the SEPAM 40 and 50.

Product Line   
SEPAM Series 40
SEPAM Series 50


Resolution   
Attached is the cutout diagram for the all SEPAM Series 40 and 50.
 

How long does it take the digital input for logic discrimination (ZSI) to be recognized by the Sepam relay?

Issue
User wishes to know how long it takes the digital input for ZSI to be recognized by Sepam relay

Product Line
Sepam series 20
Sepam series 40
Sepam series 80

Environment
Performance

Resolution
It takes approximately 13 ms (one cycle time of the control reading) operating time for the relay to recognize and react to an input change.

Note: For a Sepam series 20, only input I13 can be used to receive a blocking reception.

Show More