Yes, the part name is 4061PBC
No, a 30USBC mech will not fit a 4061VH or 4061PBL or similar plates
30USBC mechs will only fit a 4031VH or similar communication plates as 30USBC is a 30 series style of mech
Yes, the 4066PBC is just the cover only.
The 4063PBC is just the cover only. If you would like the grid plate as well the part number would be 4063VH.
1x 4064VH-HB - 4 gang grid and plate assembly to suit 60PB Series (Note: The 4064VH is also available in Horizon Silver (HS), Ocean Mist (OM), and Pure White (PW))
4x 60PBL - Saturn Push-button with LED to suit 4060 Series (Note: You could also use the 60PB Saturn Push-button without LED to suit 4060 Series)
The plate dimensions are the same for 1 gang and 2 gang saturn architrave
97mm Hx 38mm W
No, Only up to three gang switch plates are available in saturn. The 4 gang switch plate can be made using the following parts:
4064VH-xx(PW, OM, HS or HB)
4061D32 and 4061/45 cooker switches are supplied with a spare labeled mechanism cap that is marked COOKER to replace the unmarked cap. Picture attached.
Thus the customer has the choice to use 4061D32 and 4061/45 either marked COOKER or unmarked.
4061PBL-HB (Horizon Black)
4061PBL-EB (Espresso Black)
The overall dimensions for the 4061 Saturn Architrave switch is 34mm(W) X 97.5mm (H) 31.6mm(D)
Some of the key features are:
- 1 gang
- LED lighting Indication
- 4000 series saturn architraive
- horizontal and vertical mounting
- 16AX switching current for fluorescent lamps
Please see diagram below:
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4061AL
The reason why is because the LED on the switch is running in series so essentially they are fighting for 240V.
This can be over come by two solutions. The first be running a neutral to the switch. The second, placing a load correction capacitor (31CAP
) across the load.
See attached PDF's for wiring diagrams.
For further information on the load correction capacitor please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31CAP
The dimensions are 34mm (W) X 97.5mm (H)
The switch mechanism that goes into the 4061TC is a 60TSRM3.
That comes complete with a 60PBL push button switch (with LED indicator).
Part number for the mechs is Clipsal 60PBL
Unfortunately not, 4061/45 does not have an LED indicator
Yes, Due to a change in the Wiring Regulations these now have to be lablled with 'Cooker' on the switch.
No, Saturn switch LED's only come in blue.
No , The 60R32 series mechs are only designed to go into the 4025XA and 4025XUA plate styles. If Mechs over 32 amp are required for Saturn plates then you will need either 4031VH plate and 30M35 series mechs or the dedicated cooker plates 4061D32 or 4061/45 series
No, The switch plate has the cap eg. 4061VH. The Button mounts onto the switch plate behind the cap.
Yes it does, they are supplied with the part.
Dimensions for both Z4061 & 4061:
97.5mm (H) x 34mm (W) 31.6mm (D)
Unfortunately no. Saturn OneTouch mechanisms have to be ordered separately.
Saturn onetouch mechanisms to suit the plates are:
60TSRM3 - Saturn OneTouch master electronic switch, 3-wire, 6AX, integral relay
60TDM - Saturn OneTouch master dimmer, 2-wire, 350 W max, suitable for Clipsal LEDs
60TDSM - Saturn OneTouch remote dimmer/switch, supports up to three-way dimming and switching
For further information, please visit: https://updates.clipsal.com/ClipsalOnline/Files/Brochures/A0000293.pdf
The part number for Saturn cover to suit is a - 4061/45C
There is no such option but if the switch mech is removed from behind the plate then the push button cap can remain, alternatively replace with 4060vx
No unfortunately this is a one-way device and cannot be two-wayed as it is integrally switched. If you wish to two-way dim a circuit you will need to use a master and slave mechanism in the OneTouch Series. To create such a setup you would require a 2X 4061TC, 60TDM and a 60TDSM.
, however we do offer a slightly different styled switch in the saturn range which is capable of 45A.
The button is an oval shape and slightly larger. The part number is 4061/45
Some of the key feaures are :
- 1 Gang
- 250V AC rated
- Saturn Series
- Electric cooker switch
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4061/45
No, unfortunately there isn't a 32A switch that fits in a 2 gang Saturn switch plate.
The only 32A switches in the Saturn series are the 60R32 that fits in the 4025XA and the 4061D32 cooker switch.
For further information please visit https://www.clipsal.com/Trade
The codes are
60TSRM3 Saturn OneTouch master electronic switch, 3-wire, 6AX, integral relay
60TDM Saturn OneTouch master dimmer, 2-wire, 350 W max, suitable for Clipsal LEDs
60TDSM Saturn OneTouch remote dimmer/switch, supports up to three-way dimming and switching Wall plates —
Available in colours EB, OM, PW
4061TC 1 gang grid and cover plate, Saturn OneTouch — standard size
4062TC 2 gang grid and cover plate, Saturn OneTouch — standard size
4063TC 3 gang grid and cover plate, Saturn OneTouch — standard size
4064TC 4 gang grid and cover plate, Saturn OneTouch — standard size
4065TC 5 gang grid and cover plate, Saturn OneTouch — standard size
4066TC 6 gang grid and cover plate, Saturn OneTouch — standard size
4061ATC 1 gang grid and cover plate, Saturn OneTouch — architrave size
4062ATC 2 gang grid and cover plate, Saturn OneTouch — architrave size
4062TFC 2 gang grid and cover plate, Saturn OneTouch, suits fan control switch 4060CSFM and Saturn OneTouch mechanisms
How to enter Pump Curve Data on an Altivar 6xx Process Drive?
All models and serial numbers
To monitor behavior of pump curve
ATV630 Process Drive Pump Curve Setup
Prerequisites to entering Pump Curve Data
- Motor Settings
- Speed Control Settings
- Enter pump characteristics & activate pump curves
Complete Settings => Motor Parameters + AutoTune (Also available in Simply Start Menu)
Complete Settings => Macro Config
|Base Frequency (BFR) = 60 Hz
Motor Power (NPR) =
Nominal Motor Speed (NSP) =
Nominal Motor Current (NCR) =
Motor Thermal Current (ITH) =
Motor Control Type (CTT) =
Auto Tune (TUN) =
Complete Settings => Define System Units
|Application Selection (APPT) = General Pump Control
|P Sensor Unit (SUPR) = ft
Flow Rate Unit (SUFR ) = GPM
Temperature Unit (SUTP) = F
|Low Speed LSP =
High Speed HSP =
Acceleration ACC =
Deceleration DEC =
|Pump Characteristics curves entered
Pump Characteristics (Data Sheet)
The following pump curve settings can be made through the Keypad display, SoMove configuration software or the embedded web page.
Complete Settings => Pump Characteristics
|Pump Curve Mode (PCM) = PHQ
Pump Speed (PCSP) = 1190
Flow 1 (PCQ1) = 0
Flow 2 (PCQ2) = 2585
Flow 3 (PCQ3) = 4509
Flow 4 (PCQ4) = 6737.7
Flow 5 (PCQ5) = 7720
Flow BEP (PCBQ) = 5560
Head 1 (PCH1) = 80.9
Head 2 (PCH2) = 59.5
Head 3 (PCH3) = 49.5
Head 4 (PCH4) = 27.1
Head 5 (PCH5) = 16
Head BEP (PCBH) = 40.1
Power 1 (PCP1 = 76.8
Power 2 (PCP2) = 71
Power 3 (PCP3) = 70.2
Power 4 (PCP4) = 61
Power 5 (PCP5) = 51.8
Power BEP (PCBP) = 66.8
Pump Curve Activate (PCA) = YES