No, a 30USBC mech will not fit a 4061VH or 4061PBL or similar plates
30USBC mechs will only fit a 4031VH or similar communication plates as 30USBC is a 30 series style of mech
Yes, the part name is 4061PBC
You can use an Incandescent lamps, 240V halogen / dichroic lamps, and selected dimmable CFL's. One dimmer is suitable for nearly all
Yes, the 4066PBC is just the cover only.
The 4063PBC is just the cover only. If you would like the grid plate as well the part number would be 4063VH.
Dimmer Mechanism 220-240Vac, 50Hz, 350W. Leading and Trailing edge phase control.
The plate dimensions are the same for 1 gang and 2 gang saturn architrave
97mm Hx 38mm W
Switch Mechanism, 220-240Vac, 50Hz, 400W
Standard plate size - 116mm long x 76mm wide x 11mm thick
You can use a 4000VH1 to hide it
The switch mechanism that goes into the 4061TC is a 60TSRM3.
The overall dimensions for the 4061 Saturn Architrave switch is 34mm(W) X 97.5mm (H) 31.6mm(D)
Some of the key features are:
- 1 gang
- LED lighting Indication
- 4000 series saturn architraive
- horizontal and vertical mounting
- 16AX switching current for fluorescent lamps
Please see diagram below:
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4061AL
There is no telephone mech to suite a Z4061VH - These are designed for 60 series mechs (light switches and dimmers).
Would need to purchase Z4031VH-ZW and add 30BTM(telephone mech)
1x 4064VH-HB - 4 gang grid and plate assembly to suit 60PB Series (Note: The 4064VH is also available in Horizon Silver (HS), Ocean Mist (OM), and Pure White (PW))
4x 60PBL - Saturn Push-button with LED to suit 4060 Series (Note: You could also use the 60PB Saturn Push-button without LED to suit 4060 Series)
Dimensions for both Z4061 & 4061:
97.5mm (H) x 34mm (W) 31.6mm (D)
Saturn One touch is now obsolete.
The part codes are 4061TC (OM - Ocean Mist and PW - Pure White) this is just the plate 4062TC-xx, 4063TC-xx 4064TC-xx 4066TC-xx are the other plates.
The Onetouch switch is 60TSRM3, which is 6AX 3 wire and requires a neutral connection.
The Onetouch dimmer module code is 60TDM, 350W max, does not require neutral connection.
The dimmer/switch secondary mech is 60TDSM. This can act as a slave for either the 60TSRM3 or 60TDM to allow 2 and 3 way switching and dimming. Does not require neutral connection.
See wiring diagram for typical dimmer and switch application
The codes are
60TSRM3 Saturn OneTouch master electronic switch, 3-wire, 6AX, integral relay
60TDM Saturn OneTouch master dimmer, 2-wire, 350 W max, suitable for Clipsal LEDs
60TDSM Saturn OneTouch remote dimmer/switch, supports up to three-way dimming and switching Wall plates —
Available in colours EB, OM, PW
4061TC 1 gang grid and cover plate, Saturn OneTouch — standard size
4062TC 2 gang grid and cover plate, Saturn OneTouch — standard size
4063TC 3 gang grid and cover plate, Saturn OneTouch — standard size
4064TC 4 gang grid and cover plate, Saturn OneTouch — standard size
4065TC 5 gang grid and cover plate, Saturn OneTouch — standard size
4066TC 6 gang grid and cover plate, Saturn OneTouch — standard size
4061ATC 1 gang grid and cover plate, Saturn OneTouch — architrave size
4062ATC 2 gang grid and cover plate, Saturn OneTouch — architrave size
4062TFC 2 gang grid and cover plate, Saturn OneTouch, suits fan control switch 4060CSFM and Saturn OneTouch mechanisms