plate only 8gang 115mm sq

Flush Plate, 8 Gang, Large Format

Catalogue Number: 38/2V
plate only 8gang 115mm sq
Colour: White Electric
Colour: Per UOM Std.
  • White Electric 1 PCE

Specifications

hide show
Range of product
Standard Series
Product brand
Clipsal
Number of gangs
8 gangs
Product destination
switch
Fixing mode
by screws
Material
plastic
Marking
without marking
Mounting position
horizontal and vertical
Fixing center
84 x 46 mm
Length
116 mm
Width
116 mm
Depth
11 mm
Sustainable offer status
Green Premium product
EU RoHS Directive
Compliant
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
Product out of China RoHS scope. Substance declaration for your information
Environmental Disclosure
ENVPEP120506EN
Circularity Profile
N/A

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • CAD Files and Packs

  • Technical Data Catalogues

  • Installation Instruction

  • Product Environmental

  • Specifications

  • Case Studies

  • Certificates (MSDS)

Frequently Asked Questions

hide show

What mounting block suits the 39/2V?

The mounting block that suits the 39/2V is the 448.

Some of the key features are:
  • 8 mounting screw positions
  • Suits all switches and socket outlets with 115 x 115 mm fl ush plates and 84x46 mm mounting centres
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=448


 

Does the Clipsal 438/2 suit the 492

The 438/2 does suit the 492. 

Do you have a 32A version of a 438 extension socket?

No, the largest rated version of a 438 extension socket is the 438/20 which is 20A.

What are the sockets suitable for 492-WE?

The suitable sockets for 492-WE are :
438/2 - extension socket
402-WE - surface socket

What is the part number for 238A with 25mm spout?

The 238/25 has 1 x 25 mm spout & 2 x25 mm conduit entries.

What is the part number of the mounting block suitable for 31/2VX large format blank switch plate?

The mounting blocks suitable for 31/2VX are
448 with dimensions of 120mm(Length) 120mm(Width) 28mm(Depth) 84mm x 46mm (mounting centres)
448SD with dimensions of 120mm(Length) 120mm(Width) 14mm(Depth) 84mm x 46mm (mounting centres)
For further information, please visit:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=448
https://www.clipsal.com/Trade/Products/ProductDetail?catno=448SD
448:

448SD:
User-added image
 

What is the part number for a square blank plate?

The part number for the square blank plate is 31/2VX-WE 115MM

For more information please visit https://www.clipsal.com/Trade/Products/flushplate
Or see Trade Product Guide Page # 84 Edition 92

What is part number for mounting clip to suit 25/2V?

The part number for mounting clip is a 154/2.

Will 25/2V double outlet, large size, vertical fit on 155P2 plaster bracket?

Yes, 25/2V will fit on 155P2. 25/2V is  Large Size Format 115 x 115mm, Double Power Outlet rated to 250V 10A.
For further information please visit:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=25/2V
User-added image

155P2 is a large plaster mounting bracket with 84mm mounting centre. For further information please visit:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=155P2
User-added image
 

What metal wall box suits the 39/2VA?

The wall box that suits the 39/2VA is 157/2.

Some of the key features are:
  • Sliding nut
  • 84 x 46 mm mounting centre
  • Suits universal wall construction
  • Horizontal and vertical mounting
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=157/2



 

What is part number for mounting block to suit 31/2VX?

The part number for mounting block to suit is a - 448

For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=448

User-added image

What is the part number for a surface mount enclosure to suit 319HP Pneumatic timer?

238/25 is a surface mount enclosure with 25mm end entries that will suit 319HP.

For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=238/25

What is the replacement mechanism for the surge protection in a 2025SF?

The replacement for the surge protection in a 2025SF is the 30SFM.

Some of the key features are:
  • Peak current (8/20µs) 6.5 kA
  • Maximum clamping voltage (8/20 µs, 100 A) 710 V
  • Energy absorption (10/1000 µS) 3 x 140J
  • Impulse response time <50 ns

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30SFM



 

What is the part number of the mounting block to suit 25/2V Standard range, double socket outlet, large size format 115 x 115mm?

448SD and 448 are the mounting blocks to suit 25/2V, Standard range, double socket outlet, large size format 115 x 115mm.  Dimensions of the mounting block are as follows:

For further information , please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=448SD
https://www.clipsal.com/Trade/Products/ProductDetail?catno=448
448SD
User-added image
448
User-added image
 

Which wall box suits the large size, twin socket outlet 25/2V?

The wall box that suits the large size, twin socket outlet 25/2V is 257D2-GY.
Its key features are:
  • 2 gang
  • 84 mm x 46 mm mounting center
  • Suits universal wall construction
  • With 20 mm cut-outs one end and 25 mm cut-outs at other, impact resistant, deep-type
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=257D2

ClearSCADA: convert group to instance and retain history

Is there a way to convert a group to an instance of a template and retain the historic data of the points from the group object?

It is possible to do this but it requires a few a few steps.  Here is how historic files work:

When you create an object in the CleraSCADA database (i.e. an analog point) an object ID is created for that point.  With 'historic' enabled on that point a corresponding folder is created in the Database\History\Historic folder.  The folder name is derived from the object ID number of the point divided by 256.  For example, if you have an analog point with an object ID of 22004 then you would see a folder created with the name HdI00085.  This is because 22004 / 256 = 85.95.

Inside folder HdI00085 will be a folder with the name of the object ID (for the example above you would see a folder named 22004).  Inside the 22004 folder will be the historic files which pertain to this point.

In order to retain history for objects in a group (that is converted to a template) you would need to do the following:

1) Note the object IDs for each of the objects in the group you wish to retain history for.  Here I've created an analog point and selected 'view status' from the database tree in order to determine that its object ID is 3882.




2) Open Windows Explorer (File Explorer) and browse to the ClearSCADA\Database\History\Historic folder.  Since the object ID is 3882, the folder we want to look for is 3882 / 256 = 15.164.  Therefore we want folder HdI00015.





3) Once the folder name(s) have been found, locate the sub folders named with the object IDs.  In this case we are looking for a folder named 3882.

Inside this folder will be files named with a .hrd extension.  The name of the file corresponds to the number of weeks that have passed since Jan 1, 1601.  One file per object (point) per week is created to store historic data.




4) Shut down the ClearSCADA server and copy the sub folders (i.e. 003882) to another location.  Shutting down the CS server ensures that the files will not be written to as you are copying them.

5) Convert the group to a template and then create an instance of the template.

6) Locate the corresponding objects (points) in the instance (from the Database tree) and note the object IDs for each of these.

7) Use the method mentioned above to find the folder names where the historic files for the instance objects reside.

8) Once the new folder names have been found, locate the sub folders named with the new object IDs.

9) Rename the saved 'original' folders (from step 4) with the new object ID names (from step 7).  In this example you would rename folder 3882 with the corresponding object ID number from the instance.

10) Shut down the ClearSCADA server and delete the sub folder from step 8).

11) Copy the folders from step 9) into the locations where you deleted the folders in step 10).

12) Restart the ClearSCADA server.  (Note: the ClearSCADA server must be shut down prior to moving the folders (in step 11) as the server requires a restart in order to recognize the newly added historic files).

The instance should now contain the historic values that were previously seen in the original group.