switch 6g vert std ptn 10a 250

Flush Switch, 6 Gang, 250VAC, 10A, Standard, Vertical, PTN

Catalogue Number: 36VA
switch 6g vert std ptn 10a 250
Colour: White Electric
Colour: Per UOM Std.
  • Black 1 PCE
  • Cream 1 PCE
  • White Electric 1 PCE
Added to cart


hide show
Range of product
Standard Series
Product brand
Device presentation
basic element with full cover plate
Switch function
  • 2-way
  • 1-way
    • Actuator
      Number of rocker
      Device mounting
      Fixing mode
      by screws
      Local signalling
      [Ue] rated operational voltage
      250 V AC
      Rated current
      10 A
      without marking
      Sustainable offer status
      Green Premium product
      REACh Regulation
      Reference contains Substances of Very High Concern above the threshold
      EU RoHS Directive
      Mercury free
      RoHS exemption information
      China RoHS Regulation
      Product out of China RoHS scope. Substance declaration for your information
      Environmental Disclosure
      Circularity Profile

      Documents & downloads

      hide show
      Filter items
      • All

      • Product Brochures

      • CAD Files and Packs

      • Technical Data Catalogues

      • Installation Instruction

      • Product Environmental

      • Specifications

      • Case Studies

      • Certificates (MSDS)

      Frequently Asked Questions

      hide show

      What is the dimension of 31VA, 32VA, 33VA, 34VA, 35V and 36VA standard sized vertical flush switches?

      31VA, 32VA,  33VA,  34VA,  35VA and 36VA standard sized vertical flush switches have a dimension of 115mm(length) x 73mm(width) x 11mm(depth). Mounting centres are 84mm apart. The switches are rated to 250V AC, 10A, 1 way/ 2 way.
      For further information, please visit https://updates.clipsal.com/ClipsalOnline/Files/Brochures/A0000108.pdf


      Is part number 32VA still available in Brown?

      Yes. Part number 32VA -BR is standard part.

      Is 36VAC mainly used for hoisting machine in your market ?

      In our case we are multi-voltage supplied, i.e. the voltage 36VAC can be used because it is in the range, here the hoisting market used frequently 48VAC.

      What is the part number for a 3 phase 80AMP 36KA C/B?

      The part number for a 3 phase 80AMP 36KA C/B is - 18731
      For further information , visit link below:-
      User-added image

      What is the part number for a 3pole 32amp 36kA C/B?

      The part number for a 3pole 32amp 36kA C/B is - 18727
      For further information , visit link below:-
      User-added image

      What is the inrush of a K range contactor

       The inrush is 30VA but the holding is 4.5VA

      what is consumption of lC1k0910B7 ?

      30VA In Rush 

      4.5 VA Sealed 

      What is the maximum cut out size of a Clipsal plate in the Standard Series?

      52mm x 76mm

      Example References (not comprehensive):

      What is the part code for 160A 36kA MCB

       You can use LV430403 + Lv430430 + phase barriers / terminal shield

      What is the part number of 3 pole, 630A , 36KA breaker?

      The part number of 3 pole, 630A , 36KA breaker is LV432876
      LV432876 picture- Schneider-electric
      circuit breaker Compact NSX630F - Micrologic 2.3 - 630 A - 3 poles 3d

      For more information see: https://www.schneider-electric.com.au/en/product-range-selector/1887-compact-nsx--630a/?p_url=http%3A%2F%2Fwww.ops-ecat.schneider-electric.com%2Fecat%2Fbrowse.do%3Fconf%3Dnull%26el_typ%3Dproduct%26range_id%3D1887%26prd_id%3DLV432876%26scp_id%3DAU_en

      Is the eDLT a stand alone unit?

      This product works in-conjunction with the C-bus system and needs a relay to switch the appropriate loads. A standard switch uses 240V appose to the C-Bus system that operates at 36V.

      Can the A9F44210 be used with 110v AC?

      Yes it can, the only difference between a 100v and 230v is that you will get 36kA breaking capacity as opposed to 20kA (230v).


      Can you hardwire the input/output of the Matrix-UPS?

      Can the input or output of a Matrix UPS be hardwired?

      Product Line:
      Matrix UPS

      All serial ranges

      A user may wish to hardwire the input/output of the UPS rather than use the supplied input power cord.

      APC offers a hardwire kit to be used with the 120/208 Matrix-UPS product. The part #s for these kits are as follows:

      MXA001: 5kVA Hardwire kit
      MXA002: 3kVA Hardwire kit

      These hardwire kits replace the standard back plate and allows the input and output of the Matrix to be wired directly to their corresponding electrical panels. This kit provides 120V, 208V and 240V on the output. The electrical specifications for both the Matrix 3kVA and Matrix 5kVA UPS systems are as follows:

      Input Over-current Protection
      3kVA: 20 A
      5kVA: 30 A

      Input/Output Wire Size
      3kVA: 12 AWG
      5kVA: 10 AWG

      What is the part name for the standalone C-Bus power supply?

      The part name for the standalone C-Bus power supply is 5500PS

      This power supply should only be used to power C-Bus hardware, and provides up to 350mA at 36v DC

      Note, this power supply is not suitable for use with the CTC series touchscreens, these units have their own power supplies

      Video: How do I replace the APCRBC140 or RBC44 battery modules in my SURT or SRT series Smart-UPS?

      How do I replace the batteries in my SURT or SRT series Smart-UPS?

      Product Line:
      Smart-UPS Online

      All SURT/SRT models 3Kva or larger, All Serial Numbers

      The average life span of a battery module is 3-5 years depending on environment and usage. For best performance the ambient temperature should be 68-77 degrees Fahrenheit. Replacing battery modules is a quick and easy process and can be performed without turning off the UPS. Please note that while you do not have to power down the UPS, you will not have any battery back up protection for the short period when no batteries are installed in the UPS.

      All SURT and SRT units 3kva or larger use the APCRBC140 RBC Kit (This RBC kit replaced the older RBC44. APCRBC140 can be used in SRT or SURT unit, RBC44 only work in SURT)
      One APCRBC140 includes two battery modules
      3kva-6kva units use ONE APCRBC140 kit (Two Modules)
      8kva-10kva units use TWO APCRBC140 kits (Four Modules)

      To replace your batteries:
      • Remove the plastic bezel from the front of the UPS by pulling it off straight towards you
      • Remove the screws that hold the protective metal battery bay covers in place.
        • On 3-6kva units - Slide the cover to the left, then open like a door
        • On 8-10kva units - The bay covers come  off of the unit entirely
      • Disconnect the battery connectors by pulling straight out towards you
      • Slide the modules out of the UPS one by one. Be careful - They're heavy
      • Once all modules are removed, repeat these steps in reverse order to install new batteries
      • When the new batteries are installed, run a self test to clear any "Replace Battery" alarms

      What is the part number for the 3 Poles 36KA NSX Breaker with 200 Amps trip unit ?

      The part number for the 3 Poles 36KA NSX Breaker with 200 Amps trip unit is "LV431631"


      Video: SRT UPS reports Battery Charger Event, Event Code 142

      The UPS reports: Battery Charger Event – event code 142 on the display or in the NMC event logs

      Product Line:
      SRT Models
      This event may be caused by a blown charger fuse, or bad batteries.
      To determine the cause of this behavior, perform the following troubleshooting steps:
      • With the UPS input connected to AC mains, disconnect all the batteries in the system: all internal batteries and any external batteries, if used.
      • Go to the Status section on the display and under Battery, check Voltage.
      Note: You do not need to perform measurements on the UPS battery terminals.
      • If the voltage displayed on the UPS display is below the “Voltage level” (refer to the below values), the charger fuse is blown and the UPS requires replacement.
      • If the voltage displayed on the UPS display is at, or above, the “Voltage level, the batteries need to be replaced.
      Models Voltage level
      SRT 2.2kVA models If under 80V, the UPS should be replaced;
      SRT 3kVA models If under 100V, the UPS should be replaced;
      SRT 5-6kVA models If under 200V, the UPS should be replaced;
      SRT 8-10kVA models If under 200V, the UPS should be replaced;

      MF-63103, MF-63123 to M400, or M800 Wiring Instructions (Airflow)

      The below  schematic works for M400 & M800 actuators.  The system needs a 30VA transformer for the new actuator.  The actuator dipswitches need to be adjusted for Floating [24v open & 24v close] dipswitches 1 & 2 on and the rest off. 

      Manual Operation
      There is a red manual operation handle on the actuator, see figure 2.  When it is lowered, the motor stops. Then the actuator can be operated manually if the handle is turned.


      Original Wiring

      New Wiring

      ATTENTION: Actuators are shipped with manual override lowered (MAN). For normal operating, the handle must be raised (AUTO).    

      LED blocks: When, How, Which surge suppressors to implement.

      Goals and Symptoms

      LED blocks:
      When, How, Which surge suppressors to implement.

      Facts and Changes


      Causes and Fixes

      - When to implement surge suppressors :

      If the LED is exposed to high voltage, short term spikes such as those created when large coils are de-energised ( solenoids, large contactor etc.) then damage may occur to the circuitry, causing a premature failure of the device. This damage can also occur where the inrush to the coil is high.

      The catalogue characteristics state that where the pilot light is fitted directly in parallel across an inductive coil, the inrush of the coil must not exceed 30VA. Remember that the inrush of the coil is usually very high compared to the nominal power consumption.
      If this value of 30VA is exceeded, then a suppressor block must be used in conjunction with the pilot light. It is also advisable to fit suppression across the inductive load to reduce the back emf produced.

      - How to implement surge suppressors :
      Connect the suppressor in parallel with the LED block.

      - Which surge suppressors to implement :
      ZBVJ* and ZBVB* => mostly used on 12Vdc or 24Vdc, the inductive loads are generaly low. However it is recommended to implement a freewheel diode. You can use the ZBZG156 which includes a diode.
      ZBVG* (110...120Vac) => Use ZBZVG (maximum power of coil 120VA).
      ZBVBG* (24...120V ac/dc) and ZBVM* (230Vac) => Use ZBZVM (maximum power of coil 230VA).

      For coils with a power above the suppressors limitation, use a dedicated suppressors on the coil itself:
      Freewheel diodes for DC applications.
      Bidirectionnal diodes or varistors for AC applications.

      Legacy KB System (APS) Data: RESL204809 V1.0, Originally authored by LaBe on 03/16/2011, Last Edited by LaBe on 03/16/2011
      Related ranges: Harmony XB4

      What is the replacement coil part number for the LC*D09 through LC*D32 and LC*DT20 through LC*DT40 TeSys contactors?

      Identifying replacement coils for tesys D non-reversing and reversing conactors

      Product Line:
      IEC Contactors and Starters

      Products sold and used in the United States

      Replacement coil is needed

      DC replacement coils are not available.
      AC Coils are 50/60 hertz for voltages as listed below:

      Volts - Part Number
      12 ____ LXD1J7
      21 ____ LXD1Z7
      24 ____ LXD1B7
      32 ____ LXD1C7
      36 ____ LXD1CC7
      42 ____ LXD1D7
      48 ____ LXD1E7
      60 ____ LXD1EE7
      100 ___ LXD1K7 ( never brought to North America )
      110 ___ LXD1F7
      115 ___ LXD1FE7
      120 ___ LXD1G7
      127 ___ LXD1FC7
      200 ___ LXD1L7
      208 ___ LXD1LE7
      220 ___ LXD1M7
      230 ___ LXD1P7
      240 ___ LXD1U7
      277 ___ LXD1W7
      380 ___ LXD1Q7
      400 ___ LXD1V7
      415 ___ LXD1N7
      440 ___ LXD1R7
      480 ___ LXD1T7
      575 ___ LXD1SC7
      600 ___ LXD1X7
      690 ___ LXD1Y7

      Note: A contactor with an AC coil can be changed to a different AC voltage coil, IE you can take an LC1D09 with a 120VAC coil and put a 24VAC coil in it instead. An AC device cannot be switched to a DC coil, and a DC device cannot be switches to an AC coil.