screw s/drill 6gx40 p/hd pk100

General Accessories Screws, Pan Head, Self Drilling Point, 6 x 40mm, Bag 100

Catalogue Number: 357P40
screw s/drill 6gx40 p/hd pk100
RRP (Inc. GST)


hide show
Product brand
Screw gauge
40 mm
Shape of screw head
  • panhead
  • pozidriv No 2
    • Screwdriver shape
      Screw type
      self drilling
      Size of screw head
      6.85 mm
      Unit Type of Package 1
      Number of Units in Package 1
      Package 1 Weight
      231 g
      Package 1 Height
      30 mm
      Package 1 width
      148 mm
      Package 1 Length
      190 mm
      EU RoHS Directive
      Mercury free
      RoHS exemption information
      China RoHS Regulation
      Product out of China RoHS scope. Substance declaration for your information
      Environmental Disclosure

      Documents & downloads

      hide show
      Filter items
      • All

      • Product Brochures

      • Specifications

      • Corporate Marketing

      Frequently Asked Questions

      hide show

      What is the part number for the bitsa box?

      The part number for the bitsa box is 357TB.
      Some of the key features are:
      • Tool boxes
      • 12 compartment transparent box with assorted screws, screws and quantities included
      • Includes: 357WF30 (100), 357/20 (150), 357WH12 (350), 357P30 (200), 357P20 (300), 357WH25 (100), 357PH50 (50), 357/63 (50), 357WHP32 (100), 357PH45 (100), 357/35 (100), 357/40 (100)
      For further information please visit


      What is the material of construction of 357P20, pan head screws?

      357P20 is made of Zinc plated steel. 

      For further information, please visit


      How to Install a Duct System in an EcoAisle.

      How to Install a Duct System in an EcoAisle.

      Product line:




      Duct System Installation

      IMPORTANT: Install support brackets before proceeding with the remainder of this installation.

      Refer to “Support Bracket Installation” on page 38 for instructions on how to install the support brackets.


      How do you set the IP Address of a M340 BMXNOE?

      To set the IP Address to a M340 BMXNOE01x0 module, a new network needs to be setup. In the Unity project browser, expand the Communication folder then right click on Networks and select New Network…

      Set up an Ethernet network and name it. The default name is Ethernet_1. Click OK. You will see Ethernet_1 under your Networks folder. Double-click the Ethernet_1 network and the configuration screen will appear.
      Within the Ethernet network configuration the appropriate Model Family needs to be selected. The default Ethernet model family is set to a NOE. Leave the default selection. If you hover over the different model family options with your mouse you will see what each option covers as far as CPU's and NOE's.

      Once the correct model family has been selected, the new network has to be linked to the BMXNOE. To link the network, select the BMXNOE Ethernet port from the Project Browser. The BMXNOE Ethernet Configuration screen will come up. On that screen you will link the network previously setup, as seen below.

      Rev Date 7/18/2017

      Video: How to Start your Symmetra PX 250/500 UPS

      How to Start your Symmetra PX 250/500 UPS
      Product line:
      Symmetra PX 250/500
      All Product models, all serial numbers

      Begin by applying power to the UPS by Closing the Q1 Breaker (Located in System I/O Cabinet)

      Once the display is completely powered up and the Home screen is displayed, press the wrench icon in the lower left of the screen

      Then select the operation button
      Select System Startup

      Follow the on screen prompts for starting up the UPS.  As each option is performed it will highlight the next step.

      Some options are automated and will be done for you.

      The following video demonstrates this procedure:

      Video: What causes an StF fault on an Altistart 22 Soft Starter?

      Troubleshooting StF Fault on Altistart 22

      Product Line:
      ATS22 Soft Starter

      All models

      The StF fault means the starter has exceeded the maximum start time setting, tLS, in the SEt menu.  

      tLS needs to be set higher than the ACC time.  
      For example:  If ACC (ramp up time) is 10 seconds, then set the tLS max starting time to 20 seconds.

      If ILt current limit is too low, the motor may not reach full speed within tLS limit.
      Mechanical problems on the load may prevent the motor from reaching full speed within tLS limit.
      See page 51 in the ATS22 User Manual:

      The following video is a guide for troubleshooting the StF fault code, indicating a longer than expected start-up time, on the Altistart ATS22 soft starter by adjusting the tLS (maximum start time in seconds) and ACC (ramp up time) parameters under the SET menu. tLS must be set higher then the ACC time value.