General Accessories Screws, Pan Head, Self Drilling Point, 6 x 20mm, Bag 100

The part number for the bitsa box is 357TB.
Some of the key features are:

• Tool boxes
• 12 compartment transparent box with assorted screws, screws and quantities included
• Includes: 357WF30 (100), 357/20 (150), 357WH12 (350), 357P30 (200), 357P20 (300), 357WH25 (100), 357PH50 (50), 357/63 (50), 357WHP32 (100), 357PH45 (100), 357/35 (100), 357/40 (100)

For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=357TB


 

357P20 is made of Zinc plated steel. 

For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=357P20


 

Assuming you know the difference, or the length to be checked, choose a pinion from the offer and apply the following formula:
Say we take a length to be checked of 8 metres and a cog with 36 teeth, then:

• length to be checked = number of teeth x chain pitch,
• 8000 mm divided by 36 teeth x 12.7 mm,
• 8000: 457.20 = 17.49,

Issue:
How to Start your Symmetra PX 250/500 UPS
 
Product line:
Symmetra PX 250/500
 
Environment:
All Product models, all serial numbers

Resolution:
Begin by applying power to the UPS by Closing the Q1 Breaker (Located in System I/O Cabinet)



Once the display is completely powered up and the Home screen is displayed, press the wrench icon in the lower left of the screen



Then select the operation button
Select System Startup



Follow the on screen prompts for starting up the UPS.  As each option is performed it will highlight the next step.


Some options are automated and will be done for you.

The following video demonstrates this procedure:
 

Issue:
Troubleshooting StF Fault on Altistart 22

Product Line:
ATS22 Soft Starter

Environment:
All models

Cause:
The StF fault means the starter has exceeded the maximum start time setting, tLS, in the SEt menu.  

Resolution:
tLS needs to be set higher than the ACC time.  
For example:  If ACC (ramp up time) is 10 seconds, then set the tLS max starting time to 20 seconds.

If ILt current limit is too low, the motor may not reach full speed within tLS limit.
Mechanical problems on the load may prevent the motor from reaching full speed within tLS limit.
See page 51 in the ATS22 User Manual:



The following video is a guide for troubleshooting the StF fault code, indicating a longer than expected start-up time, on the Altistart ATS22 soft starter by adjusting the tLS (maximum start time in seconds) and ACC (ramp up time) parameters under the SET menu. tLS must be set higher then the ACC time value.