screw 32mmx6 nc slot ph hd

General Accessories Screws, 32mm x M3.5 x 0.8 Pitch, Plated

Catalogue Number: 355
screw 32mmx6 nc slot ph hd
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Product brand
Clipsal
Surface treatment
zinc plated
Thread type
M3.5
Length
32 mm
Shape of screw head
  • panhead
  • slotted
    • Screwdriver shape
      Philips
      Sustainable offer status
      Green Premium product
      EU RoHS Directive
      Compliant
      Mercury free
      Yes
      RoHS exemption information
      Yes
      China RoHS Regulation
      Product out of China RoHS scope. Substance declaration for your information
      Environmental Disclosure
      ENVPEP060307EN
      Circularity Profile
      N/A

      Documents & downloads

      hide show
      Filter items
      • All

      • Product Brochures

      • CAD Files and Packs

      • Technical Data Catalogues

      • Technical Leaflet

      • Installation Instruction

      • Operating Manuals

      • Specifications

      • Certificates (MSDS)

      • Corporate Marketing

      Frequently Asked Questions

      hide show

      What is the part number of the lock nut for 355 series screw?

      359 is the locknut for 355 series screw.
      • Size: 6 mm x 6 mm
      • fits M3.5 x 0.8 mm pitch screws
      For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=359

      What is the dimensions of the cover only for CEF40WK

      354 x 354 x 32mm

      NetBotz Room Monitor 355/455 POE Power Specifications

      Issue:

      NetBotz Room Monitor 355/455 POE Power Specifications

      Product Line:

      NetBotz

      Environment:

      NetBotz Version 3 using POE

      Cause:

      POE specifications

      Resolution:

      The NetBotz 355 and 455 are Class 0 POE devices.

      The IEEE standard 802.3 for supplying power over Ethernet allows the device providing power to use a voltage between 36–57 V DC. The nominal voltage is 48 V with a current of 10–400 mA, subject to a maximum load power of 15.40 Watts.
       

      How many data classes in the IEC61850 protocol are there and what are the subcategories?

      There are a total of 355 data classes. The are divided into 7 categories as listed below:
      Data Classes Number
      1. System Information 13
      2. Physical Device Information 11
      3. Measureands 66
      4. Metered Values 14
      5. Controllable Data 36
      6. Status Information 85
      7. Settings 130

      AEDL3
       
      Legacy KB System (APS) Data: RESL204873 V1.0, Originally authored by MiZe on 03/19/2011, Last Edited by MiZe on 03/19/2011
      Related ranges: SFT 2841 - SFT2848 (Sepam series 20, 40, 80 software)

      What is the temperature range for the 56 series boxes

      Temperature range is minus 40 to +55

      What is the cable size for the PDL 35S festoon

      Size is 2.5 TPS

      Will Fault F55 clear it self or does it have to be cleared manually in the MPPT80?

      The fault F55 will clear itself when the heat sink temperature falls below 80 °C (176 °F) for 30 seconds.

      Is there a 35A double pole mechanism?

      No. We have 30M35 which is 1 pole, 35A mech.

      Will an ION8650 35S socket meter work in a 45S socket.

      Issue:
      User may have purchased a 35S socket meter and needs to connect it to a 45S socket

      Product Line:
      ION8650 Series Meter
      Meter Socket 

      Environment:
      Meter installation

      Resolution:
      The 35S and 45S sockets are interchangeable. The ION8650 form 35S meter will function correctly in a 45S base.  




       

      What is the overall dimension of 651A2-BK?

      Overall dimension of 651A2-BK is 365 (W) x 209 (H) x138(D).

      Can I use my Software or USB Dongle License for ISaGRAF 3.55 with SCADAPack Workbench?

      Legacy USB Dongles and legacy software licenses for ISaGRAF 3.55 are not supported in SCADAPack Workbench (CAM3 or CAM5).

      For license upgrade options please contact SalesTRSS@Schneider-Electric.com

      What is the key for a ZB5AS14

      Key would be a 455

      What is the Temp rating for 56 series

       -40 degrees - +55 degrees max

      Does the Clipsal 755 Smoke Alarm have a test button

      Yes it does

      What is the AC3 rating of a PDL 56SW363/2

      The AC3 rating is 18.5kw, 35A

      Do you have a 35A mech that says hot plate?

      Yes, we do have a 35A mech that says hot plate. 

      The part number is 30M35-HPLATE.

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30M35-HPLATE.

      What is the part number for cat 5 cable in 305 mtr roll?

      The part number is 2D4P5IPV3B

      Please click this link for more information
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=2D4P5IPV3B

      User-added image

      What is the spare 455 key in the Harmony range

      Spare key is ZBG455

      What is the replacement for a XB4BG03 complete keyed 455 Selector switch?

      The replacement will require two parts:
      1. ZB4BG0- Keyed 455 Selector switch
      2. ZB4BZ103- 2 N/O contacts + Mounting collar

      What is the part number for the flap of 255 as a spare?

      The part number for the flap of 255 as a spare is 255FLAP-TR.

      How do you order a PDL Iconic 395 in colour Anthracite?

      Can be ordered using the following codes:
      PDL395G + PDL395C-AN

      What is the largest trunking we do in NZ

       The larges is Actassi 155 x 55 part code ISM11400


      Is there a fire rated 56 Series type E2 box (enclosure)

      Metal enclosures are not available in PDL 56 Series range.  Temperature rating is -40 to +55 deg C.

      What is the part code for a Clipsal black festoon lampholder

       The part code 541ES-BK is not longer stocked in NZ
      use the PDL code PDL35S 35s festoon lampholder

      What is the dimension of 31VA, 32VA, 33VA, 34VA, 35V and 36VA standard sized vertical flush switches?

      31VA, 32VA,  33VA,  34VA,  35VA and 36VA standard sized vertical flush switches have a dimension of 115mm(length) x 73mm(width) x 11mm(depth). Mounting centres are 84mm apart. The switches are rated to 250V AC, 10A, 1 way/ 2 way.
      For further information, please visit https://updates.clipsal.com/ClipsalOnline/Files/Brochures/A0000108.pdf

       

      What is the length of the shaft in the GV3APN02 kit?

       The shaft included in the GV3APN02 kit is a GVAPA1. It has a length of 315 mm.
       

      Video: CoDeSys 3.5 Coding example 3 axes synchronization - A clock

      Is Microsoft Office 365 supported with PME 8.x?

      Issue:
      A customer would like to know if PME 8.x is compatible with MS Office 365.

      Product Line:
      PME 8.x

      Environment:
      Software Compatibility

      Resolution:
      Currently PME 8.x supports Excel 2016 which is part of Office 365. This is strictly in the sense that Excel 2016 is installed locally on the server or engineering client in order to run reports.  The cloud based components of 365 are not supported.

      ZB5AA343 - what is the Cap with arrow up not the word UP ?

      The  Cap supplied not clipped in - allowing orientation of arrow in 4 directions
      Part Code =  ZB5AA334 or 335 in black or white

      What is the part number for flap to suit 255?

      The part number for flap to suit 255 is 255FLAP-TR.

      What is the part number for a PDL DOL Starter 240V 5.5Kw

      PDL56DOL12LOBGY - less overload
      available on page 155 Pocket book PDL 2014

      Is it possible to configure a Form 9S 8600/8650 meter as a Form 35S?

      Issue
      Customer purchased a ION 8600/8650 with "Form Factor" of 9/29/36S Base and wants to wire as a Form 35S

      Product Line
      ION86xx

      Environment
      Installation and wiring

      Cause
      Customer purchased 9s meter for use in form 35S environment

      Resolution
      It is possible to configure a form 9S ION 8600/8650 meter as a form 35S, but a form 35S cannot be converted into a 9S since
      the form 35S meter does not have a blade for I2 connection.

      Following the diagrams below, the meters connection terminals can be rewired to match.

      The 9S meter is normally configured as bellow to accept a 3 Element 4Wire-Wye system. 
      As you can see, the blade inputs are used to accept the I1/I2/I3 & V1/V2/V3/Vref inputs for the 9S. A 35S meter only uses I1/I3 & V1/V3/Vref to meter the Delta system.


      The 9S can be modified easily to simulate the 35S measurement structure as below:


      This can be done by modifying your 9S base meter wiring as the image below:


      The meter's Volts mode configuration setting, found in the Basic Setup Parameters, needs to be changed to 35S 3-Wire instead of 9S 4-Wire.
      The firmware is the same for all types of form factors hence, it is not required to change the firmware.
       

      Does a 2025RCD30-WE fit into a 255 weather protected box?

      Yes, the 2025RCD30-WE will fit into a 255 weather protected box.The 2025RCD30-WE is 27mm deep and the 255 has 35mm depth. The bottom screwed plug will need to be shortened if not used as a cable entry.

      Is part no 255 available in shallow version

      There is not a shallow version of part no 255 available

      for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=255


      User-added image

      Vamp 255 communications maps

      Issue    
      Need the register list for my VAMP relay.

      Product Line
      Vamp 255

      Resolution
      See the attached files for the VAMP 255 communications maps, this includes maps for:
      Modbus
      Profibus
      SPA bus
      DNP3
      IEC101
      IEC103
      Modbus Master
      ProfibusDP

      Note:  Latest information is available in m.vamp.fi

      Will the 755 base fit the new 755PSMA2 smoke alarm?

      No, the only bases that is compatible with each other is the 755PSMA, 755PSMA2, 755SMA, SD100

      What is the isolation unit that suits the 755 Series smoke alarms?

      The isolation unit is the 756.

      For more information, please refer to the link:
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=756 

      What is the warranty period for the 755 series smoke alarms?

      The 755 series smoke alarms have a 5 year warranty period
      755PFM
      755PFM4
      755PSMA2
      755PSMA4
      755RB
      755RFB
      755RLPSMA2
      755RLPSMA4

       

      Is there a 35A Mech for Saturn Zen Series

      No there is no saturn mech available. There is either the Z4061/45 cooker switch plate or the 30M35 in a Z4031VH Plate

      Is there a 35A Mech that fits the extra switch in the Saturn Series double power point 4025XA available? ?

      No unfortunately this part is unavailable. However, we have a 32A 60Series Mech that will fit the double power point 4025XA.
      The part number is 60R32

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=60R32

      GT String sizing calculator temperature compensation.

      The GT string sizing tool uses a compensating value of 35ºC above the user input temperature range.

      Cell temp is always higher than ambient temp. If you've ever placed your hand on a solar panel on a sunny day, that's very evident. It's the cell temp that determines the change in Vmp, thus the need for the temperature compensation. It's our way of determining the lowest array voltage during the hottest part of the day.

      The temperature difference that our calculator is using is fixed at 35C above ambient. This value was chosen based on several research reports stating that the average cell temp (above ambient temp) is 35C above ambient temp in a range of ambient temps and module mounting configurations.

      What are the connections front and back of the 815MST35 audio socket

       3.5mm stereo female to 3.5mm stereo female

      What is the part code if I need a ZB4BG2 key switch, but with a different key then the standard 455 key?

      One option is a ZB4BG212. This has a 421E key.

      What is the part number for cat 6A shielded cable?

      The part number for the shielded 4 pair FUTP CAT6A LAN cable, LSZH, 305 metre reel is 2D4P6ALSF3R-BU.

      Will Zen switch plate fit in 223H and 255 enclosures?

      Yes, Zen switch plates will fit in 255 as it has a depth of 77mm. It will not fit in 233H as it has a depth of 29mm only.

      For further information, please visit 
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=223H

      https://www.clipsal.com/Trade/Products/ProductDetail?catno=255

       

      NetBotz | Hardware & Software Support Information and Limits

      Issue:
         Description of NetBotz warranty extensions and limitations.

      Product Line:
         NetBotz (all appliances)

      Environment:
         NetBotz Hardware Warranty & Software Support

      Resolution:

      NetBotz 750
      The NetBotz Rack Appliances 750 has a software/hardware support limitation of 5 years (2 years factory with 3 years of purchasable extensions).  All attached downstream NetBotz Sensors and NetBotz Sensor Pods are covered under the extended warranty of the NetBotz Appliance, except for consumables, such as wireless sensor batteries (covered under Wireless Sensor factory warranty only).
        Year 1 Year 2 Year 3 Year 4 Year 5 Year 6
        Software Support &
      Hardware Support  
        Factory Warranty     WBEXTWAR1YR-NB-07     WBEXTWAR1YR-NB-07     WBEXTWAR1YR-NB-07     Out of Support  
        WBEXTWAR3YR-NB-07     Out of Support  

      NetBotz 250 / NBACS125 / NBACS1356
      The NetBotz Rack Appliances 250 has a software/hardware support limitation of 5 years (2 years factory with 3 years of purchasable extensions).  All attached downstream NetBotz Sensors and NetBotz Sensor Pods are covered under the extended warranty of the NetBotz Appliance, except for consumables, such as wireless sensor batteries (covered under Wireless Sensor factory warranty only).
        Year 1 Year 2 Year 3 Year 4 Year 5 Year 6
        Software Support &
      Hardware Support  
        Factory Warranty     WBEXTWAR1YR-NB-02     WBEXTWAR1YR-NB-02     WBEXTWAR1YR-NB-02     Out of Support  
        WBEXTWAR3YR-NB-02     Out of Support  

      NetBotz 200
      The NetBotz 200 is limited to the 2 year factory warranty only, which can not be extended.

      NetBotz 355/355A & 455/455A
      The NetBotz Rack Appliances 355 and 455 have a software/hardware support limitation of 5 years (2 years factory with 3 years of purchasable extensions).  A base 2 year software support contract must be purchased alongside the factory warranty.  All attached downstream NetBotz Sensors and NetBotz Sensor Pods are covered under the extended warranty of the NetBotz Appliance, except for consumables, such as wireless sensor batteries (covered under Wireless Sensor factory warranty only).
        Year 1 Year 2 Year 3 Year 4 Year 5 Year 6
        Software Support     WNBWN001     WNBWN003     WNBWN003     WNBWN003     Out of Support  
        Hardware Support     Factory Warranty     Out of Support  

      NetBotz 450 & 570
      The NetBotz Rack Appliances 450 and 570 have a software/hardware support limitation of 5 years (2 years factory with 3 years of purchasable extensions).  A base 2 year software support contract must be purchased alongside the factory warranty.  All attached downstream NetBotz Sensors and NetBotz Sensor Pods are covered under the extended warranty of the NetBotz Appliance, except for consumables, such as wireless sensor batteries (covered under Wireless Sensor factory warranty only).
        Year 1 Year 2 Year 3 Year 4 Year 5 Year 6
        Software Support     WNBWN002     WNBWN004     WNBWN004     WNBWN004     Out of Support  
        Hardware Support     Factory Warranty     Out of Support  
       
       

      What is the part number for the smoke alarm recessed?

      the part number is 755 PFM

       

      Is there a replacement for the 955RW30?

      There is no direct replacement but there are 2 alternatives to the 955RW30.
      If you want to keep the rewire-able aspect then the 955RW10-WE is an options or...
      If you want to keep the 30ma tripping aspect then the 955 is the way to go.

      For more information, please refer to the link:
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=955RW10 
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=955 


       

      Why is my newly installed 755 Smoke detector is chirping?

      Assuming a new battery has been used, If the red LED is flashing then may be a settling-in period. Allow 4 hours for the detector to reset.

      For further information please visit https://www.clipsal.com/Trade/search-results?q=755
       

      How do you tell which alarm is the source of triggering in interconnected 755 units?

      In the event of interconnected Alarms triggering:
      Using caution,
      first of all locate the source of the alarm. This unit will have its alarm sounding and red LED blinking rapidly.
       
      Show More