switch 4g arch 10a 250v

Flush Switch, 4 Gang, 250VAC, 10A, Architrave

Catalogue Number: 34A
switch 4g arch 10a 250v
Colour: White Electric
Colour: Per UOM Std.
  • Cream 1 PCE
  • White Electric 1 PCE
Added to cart

Specifications

hide show
Range of product
Standard Series
Product brand
Clipsal
Device presentation
basic element with full cover plate and grid
Switch function
  • 2-way
  • 1-way
    • Actuator
      rocker
      Number of rocker
      4
      Device mounting
      flush
      Fixing mode
      by screws
      Local signalling
      without
      [Ue] rated operational voltage
      250 V AC
      Rated current
      10 A
      Marking
      without marking
      Sustainable offer status
      Green Premium product
      REACh Regulation
      Reference contains Substances of Very High Concern above the threshold
      EU RoHS Directive
      Compliant
      Mercury free
      Yes
      RoHS exemption information
      Yes
      China RoHS Regulation
      Product out of China RoHS scope. Substance declaration for your information
      Environmental Disclosure
      ENVPEP120506EN
      Circularity Profile
      N/A

      Documents & downloads

      hide show
      Filter items
      • All

      • Technical Data Catalogues

      • Certificates (MSDS)

      Frequently Asked Questions

      hide show

      What are the dimensions for the standard range 4 gang architrave switch, 34A?

      The dimensions for the standard range 4 gang architrave switch , 34A are - L140mm x W32mm x D10mm

       

      Is part number 343 available as 2 way?

      Yes. Part number 343 is standard as 2 way.

      Is the PDL 30A switched

       No it is not

      Is the Clipsal 343 a 2 way switch

      This is a two way switch

      What is the depth of the 140CPU534 14A including the backplane?

      The 140CPU534 14A including the backplane is 4.34 inches deep.


      Legacy KB System (APS) Data: RESL177348 V1.0, Originally authored by on , Last Edited by on
      Related ranges: Modicon Quantum

      Is there a 35A double pole mechanism?

      No. We have 30M35 which is 1 pole, 35A mech.

      Does the PDL 44A come in black?

      No. This product is only available in white.

      Is there a mounting ring for the 343 pull switch?

      No, unfortunately there is nothing available.

      What is the code for a 32A mech for Saturn 406* plates?

      There is no 32A mech that fits directly into the 406* plates,
      The 60R32-** and 60R32COOK-** will only fit into the extra switch position on the 4025XA-**

      For a standard plate with a 32A mech you will need to use a 403* plate with a 30 series 35A mech, 30M35

      Is there a 35A Mech that fits the extra switch in the Saturn Series double power point 4025XA available? ?

      No unfortunately this part is unavailable. However, we have a 32A 60Series Mech that will fit the double power point 4025XA.
      The part number is 60R32

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=60R32

      What is the AC3 rating of a PDL 56SW363/2

      The AC3 rating is 18.5kw, 35A

      Do you have a 35A mech that says hot plate?

      Yes, we do have a 35A mech that says hot plate. 

      The part number is 30M35-HPLATE.

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30M35-HPLATE.

      What do I need to put together a single phase 30A 56 Series RCD

      Use 56CB4 + A9R51240 40amp RCCB

      Can you get the 4025X with a 35A mechanism?

      No unfortunately that particular switch only comes in 10A and is not removable.

      However, the 4025XA has a removable mechanism and can be replaced with the mechanism 60R32 which is a 32A mechanism.

      Some of the key features are:

      • Saturn Series
      • 10A
      • 250V
      • Extra removable switch
      • Various colours available

      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4025XA



       

      Does the XBTGT series have a Class 1 Div 2 certification?

      Yes the XBTGT line is Class 1 Div 2 T4A or T5 (UL and CSA) Certified,


      Legacy KB System (APS) Data: RESL199265 V1.0, Originally authored by GeMc on 07/01/2009, Last Edited by GeMc on 07/01/2009
      Related ranges: Magelis XBT GT

      What mounting accessories can be used to mount a 342 pull cord switch?

      The 93BF is the one to use, which can then mount to a 240 Jbox.

      For more information please visit the Clipsal.com website on the links provided
      https://www.clipsal.com/Trade/search-results?q=342
      https://www.clipsal.com/Trade/search-results?q=93bf
      https://www.clipsal.com/Trade/search-results?q=240
       

      Does the HMIG5U2's CPU support virtualization?

      The HMIG5U2's CPU supports VT-X virtualizaiton. Please see the CPU spec below:

      https://ark.intel.com/products
      /78474/Intel-Atom-Processor-E3825-1M-Cache-1_33-GHz

      Explanation of all the Vijeo Designer service pack downloads

      In regards to updating your Vijeo Designer V6.2 to the latest service pack, here is a description of what each file does:

      (Required updates)
      This is for your buildtime environment. ie. Your PC where you develop projects. Install this first.
      https://www.update.schne
      ider-electric.com/download/HMI/VijeoDesigner/Vijeo_Designer_6.2_SP6.exe

      (Optional updates)
      Updates Manuals and Help menus. Install this second on the PC where you develop projects.
      https://www.update.sc
      hneider-electric.com/download/HMI/VijeoDesigner/Vijeo_Designer_6.2_SP6_Docs_Package.exe

      Use
      d on iPCs / PCs that are used as HMIs (ie. not the development environment)
      https://www.update
      .schneider-electric.com/download/HMI/VijeoDesigner/Vijeo_Designer_6.2_SP6_Runtime_for_Windows.exe

      Used on PCs where you need to connect to your HMI remotely via Web Gate
      https://www.update.schneid
      er-electric.com/download/HMI/VijeoDesigner/Web_Gate_Client_Files_6.2_SP6.exe

      Release Noteshttps://www.update.schnei
      der-electric.com/download/HMI/VijeoDesigner/Vijeo_Designer_6.2_SP6_Release_Notes/Vijeo_Designer_6.2_SP6_ReleaseNotes.htm

      Is there a 32A version of the 1439/20?

      No, 20A is the largest size in this model plug.

      Is there a 35A Mech for Saturn Zen Series

      No there is no saturn mech available. There is either the Z4061/45 cooker switch plate or the 30M35 in a Z4031VH Plate

      Explanation of circuit breakers in 30 amp rPDU's

      Product Line
      • Rack Power Distribution
        • AP7XXX, AP7XXXB, AP8XXX series

      Environment
      • All serial numbers

      Resolution
      Circuit breakers are in place to protect the branch circuit and its conductors. With respect to a 30A breaker, all components employed in the circuit (downstream from the circuit breaker) shall be rated for 30A use. In a scenario where a 30A circuit breaker is providing power to a 20A rated outlet, the outlet, load plug, load cord and load are rated for 20A use, thus sized for this rating. In this scenario there is inadequate protection for the outlet and all connected equipment, and potentially (and most harmfully) the conductor that is supplying the outlets themselves.

      In North America, Canada, and Europe, PDU's are evaluated under UL/CSA/EN/IEC 60950-1. This standard requires circuit breaker protection when the rating of an output is less than the rating of the input. A PDU with a 30A input plug and 20A receptacles must have circuit breakers. Section 2.7 of the 60950 standard states: "Protective devices necessary to comply with the requirements of 5.3* must be included as part of the equipment" 

      *5.3 is the evaluation of abnormal operating and fault conditions.


      In North America, the requirement is based on NFPA 70, the National Electrical Code. In general, in the United States, you can have any outlet rated less than 20A protected by a 20A breaker. However, these outlets must have protection rated no less than the outlet rating and no more than 20A. A 30A outlet must be protected by a 30A breaker and may not have anything larger or smaller.

      Europe has very similar rules to North America. The main difference is the rating of receptacles and breakers. In Europe, you typically have 10A or 16A outlets protected by a 16A breaker, but the breaker rating can be no more than 16A.

      Canada places additional restrictions. In Canada, a 15A outlet must be protected by a 15A breaker. The only exception is the "T-Slot" 20A outlet that accepts either 15A or 20A plugs. This outlet may be protected at 20A.


      If a PDU has a 30A plug and 30A receptacles, it will not require and internal circuit breaker. The 30A plug forces it to be plugged into a 30A branch circuit, which will have its own 30A breaker. The PDU can then rely on the branch circuit's breaker rather than an internal breaker.

      If a PDU has a 30A plug and 20A receptacles, it must have internal 20A branch rated breakers for the receptacles. The 30A protection of the branch circuit is too high to be safe for the 20A outlets.

      What size cables fit into the 4CB3125/10?

      If the cable is Rigid/ Semi Rigid the 4CB3125/10 breaker will take a cable from 1mm²- 50mm².

      OR

      If the cable is Flexible or Ferrule the 4CB3125/10 breaker will take a cable from 1.5mm²- 35mm².

      What is a 12vDC isolator for a 32A wind generator

      Use a 56SW340KGGY

      What is the PDL 600 Series modules for range switching

      PDL 32A mechs

      Is there a 35A mechanism (Mech) for Saturn series?

      The part number is 60R32 which is available in Artic Silver (colour code 3A - which suits the standard Saturn range), Charcoal (CC - for the Saturn Horizon range), Zen Black (ZB - for the Saturn Zen range) and Zen White (ZW - for the Saturn Zen range). This part is rated 32A suitable for the 4025XUA (standard Saturn) or Z4025XUA (Saturn Zen) which is a standard double GPO with an extra removable switch

      Please go to the website via the following link www.clipsal.com/Trade/Products/ProductDetail and check under the Documentation Tab for more information.

      What are the character limitations of Advanced Meter Security passwords?

      Product Line
      ION Setup, ION8300, ION8400, ION8500, ION8600, ION8650

      Environment
      Advanced Meter Security

      Resolution
      Passwords containing numeric only characters can be a maximum of 8 characters in length.

      Passwords containing non-numeric characters can be a maximum of 6 characters in length. 

      Note: The passwords should not contain any characters from the extended ascii table, such as accented letters, or characters from languages other than English. 

      Restrictions and password requirements for authentication on ION meters.

      1. Numeric (0 - 99999999); The password may have a length of up to 8 numerical digits only.

      2. No spaces are permitted.

      3. No leading zeros followed by other numerical digits.

      4. Valid ASCII characters only.

      5. Passwords that are alpha, alphanumeric and/or includes symbols are limited to 6 characters only.


      Valid examples of ION meter passwords:

      User1 password: 0  (zero)

      User2 password: 12345678 (this is the longest allowed numeric password at 8 digits)

      User3 password: 0A123  (old alphanumeric style)

      User4 password: #A134  (new style with non-alphanumeric character)

      User5 password: 01234$  (looks numeric but has additional non-numeric character)

      User6 password: A^@g5  (strongest possible with upper/lower case, symbols and numeric digits)

       

      Is there a 20A version of a 343 pull cord ceiling switch?

      No, unfortunately we do not offer a 20A version. However we do offer a 15A version which is the closest alternative. The part number is 306-*.
      * = Colour code E.g. 306-BR is brown.
       

      L1 VME What Colour Does the PDL151 10 way 32A Connector Strip Come in ?

      The PDL151 10 Way 32A Connector Strip Comes in White 

      Are the PDL 32A solid fuse links still available?

      No, the 32A solid fuse links are no longer available.

      Do you have a 32A double pole 30 series mech?

      No, the largest rated 30 series double pole switch mechanism is 20A.

      What is the part number for the extra mechanism 32A that fits the 4025XU?

      the part number is 60R32

      What is the part number for a 4 pole 32A circuit breaker?

      The part number is A9F54432.

      What is a 32A 1phase C/O switch for Gen system in Fiji

      Part number is 56SW332CO

      What is a 32A inductive isolator for an induction cook top

      Part number PDL 56SW150

      What is the part code for a 1 pole, 32A RCBO

       Part code is 19777

      What is the part code for a 1P 32A relay

       The part code is 15515

      What is the rating on the Neutral for the PDL 56CV532

       The rating is 32A

      Do we have a 56 series Flat pin 32A Connector?

       No not available

      Do you have a 32A 4 pole Telemecanique contactor?

      The Telemecanique contactors have now been rebadged as Schneider.
      The part number for a 32A AC1 4 pole contactor with 240V coil is LC1DT32U7.

      For further information please visit 
      https://www.schneider-electric.com.au

      Do you do a 32A TE contactor with 4 poles?

      Yes the part number for a 32A TE contactor with four poles is LC1DT32-U7

      What is the part number for a power point with extra 32A cooker switch?

      The part number for a power point with extra 32A cooker switch is a 4025XUA + 60R32COOK.

      What is the part number for a double pole 32A mech in C2000 series?

      The part number for a double pole 32A mech in C2000 seriesis C2031D32.

      Please use this link for further information:

      https://www.clipsal.com/Trade/Products/ProductDetail?catno=C2031D32

      Is there a 56 Series 5 Pin 32A with earth leakage combination switch?

      Yes the part number for a 56 Series 5 Pin 32A with earth leakage combination switch is a 56SC532RC-GY.
       

      What is the Socket Interior for a WMB532 5 pin 32A outlet?

      The Socket Interior for a WMB532 5 pin 32A outlet is a SP-116481.

      Does Schneider Electric offer ILA2E572S2166 or an equivalent replacement?

      The ILA2E572S2166 model is a proprietary model for the OEM machine builder Texpa. 

      Customers looking for ILA2E572S2166 must contact the OEM Texpa for spares.



      rev 6-11-18

      What is the size of the inter conductor for the N-series recloser cables (38kV)?

      This size will vary depending upon the rating of the conductors:


      • 1. 250A 80mm2
        2. 340A 120mm2
        3. 400A 180mm2
        4. 630A 240mm2
        5. 800A 400mm2

        These are shown in more detail in the attached guide.

        Olex cables.pdfOlex cables.pdf


      Legacy KB System (APS) Data: RESL212274 V1.0, Originally authored by DaFr on 08/09/2013, Last Edited by DaFr on 08/09/2013
      Related ranges: Others protection relays

      What is the replacement for the MPCKT22NAX00N?

      Issue: What is the replacement model for the MPCKT22NAX00N?

      Product Line:  
      MPCKT22NAX00N

      Resolution: The prescribed replacement model is the HMIPUH6A0701. 

      What is the replacement for the High HP ATS01N softstarters?

      Issue:
      Wants to order the ATS01N230LY, ATS01N244LY, ATS01N272LY or ATS01N285LY

      Product line:
      ATS01, Altistart 01, High HP

      Environment:
      All models

      Cause:
      The launch of the ATS22 in 2011 caused the High HP units to become redundant.

      Resolution:

      The ATS01 High HP units were replaced with the ATS22 units.  These are functional replacements only.  The ATS01 had no overload protection, an internal power supply and simple dial adjustments.  The ATS22 will require external 120V or 230V power.  There are no dials to adjust, but the unit will need to be programmed.  See the ATS22 User Maual, document BBV51300 to review the wiring, dimensions and programming.

      ATS01N230LY - 32A rated.  Replaced by ATS22D32S6U
      ATS01N244LY - 44A rated.  Replaced by ATS22D47S6U
      ATS01N272LY - 72A rated.  Replaced by ATS22D75S6U
      ATS01N285LY - 85A rated.  Replaced by ATS22D88S6U

       

      What is part number for 35A mech marked hplate?

      The part number is a 30M35-HPLATE.
      For more details please visit the link:
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=30M35-HPLATE
       

      Are AC fuses covered under warranty for Xantrex GT inverters?

      No, due to the nature of what can cause them to blow.
      If the replacement fuse blows immediately after replacement, please contact Technical Support on 1300 202 525.

      AC Fuse size for GT2/8 inverter: 15A ceramic slow blow
      AC Fuse size for GT5/0 inverter: 30A ceramic slow blow
      Show More