White Electric | Flush Switch, 2 Gang, 250VAC, 10A, Architrave

Issue:
Part number for the replacement of the ATS01N High HP Soft Starters.

Product line:
ATS01, Altistart 01, High HP

Environment:
All models

Cause:
The launch of the ATS22 in 2011 caused the High HP units to become redundant.

Resolution:

The ATS01 High HP units were replaced with the ATS22 units.  These are functional replacements only.  The ATS01 had no overload protection, an internal power supply and simple dial adjustments.  The ATS22 will require external 120V or 230V power.  There are no dials to adjust, but the unit will need to be programmed.  See the ATS22 User Manual, document BBV51330 to review the wiring, dimensions and programming.  See the attached file.

ATS01N230LY - 32A rated.  Replaced by ATS22D32S6U
ATS01N244LY - 44A rated.  Replaced by ATS22D47S6U
ATS01N272LY - 72A rated.  Replaced by ATS22D75S6U
ATS01N285LY - 85A rated.  Replaced by ATS22D88S6U

 

Please see attached document for the charcateristics of the new RCBos and below table shows the replacemnet part#s

RCBO
Material	Alternative Material	Description	Comment
QOE110BO3	QO110B10RCBO30F	QOE RCBO 1P+N 10A B 30mA 10kA	Direct Replacement
QOE116BO3	QO116B10RCBO30F	QOE RCBO 1P+N 16A B 30mA 10kA	Direct Replacement
QOE120BO3	QO120B10RCBO30F	QOE RCBO 1P+N 20A B 30mA 10kA	Direct Replacement
QOE132BO3	QO132B10RCBO30F	QOE RCBO 1P+N 32A B 30mA 10kA	Direct Replacement
QOE140BO3	QO140B10RCBO30F	QOE RCBO 1P+N 40A B 30mA 10kA	Direct Replacement

 

Issue:
Contacts need to be replaced in a CAD32** relay.

Product Line:
TeSys D IEC style relays

Environment:
CAD relays

Resolution:
The TeSys D IEC style relays do not offer replacement contacts.

Issue:
Operating temperature range for the Altistart 22

Product Line:
ATS22, Altistart 22

Environment:
All models, all serial numbers.

Cause:
high or low ambient temperatures.

Resolution:
The standard current ratings for the ATS22 is based on an ambient temperature of 40C (104F).  

The minimum operating temperature is -10C (14F).  The maximum operating temperature is 60C (140F).
When operating above 40C (104F), the softstart needs to be derated by 2.2% for every degree Celsius above 40C (104F).

For example:  ATS22D32S6U is 32A rated.  For an ambient temperature of 50C (122F), derating is 22% (2.2 x 10).  The 32A softstart rating becomes 24.96A (32A x 0.78 = 24.96). 

The V90 marking means that the cable is rated to an operation temperature of 90°C.

For further information please visit https://www.clipsal.com/products/detail?CatNo=800CL&tab-document-1=0

The Telemecanique contactors have now been rebadged as Schneider.
The part number for a 32A (AC1 rating) 4 pole N/O Contactor with 240V AC coil is LC1DT32U7.

For further information please visit https://www.schneider-electric.com.au