Time Delay Switch, 1 Gang, 250V, 10A, 15h, 3 Wire

Time Delay Switch, 1 Gang, 250V, 10A, 15h, 3 Wire

Time Delay Switch, 1 Gang, 250V, 10A, 15h, 3 Wire

Item Number: 31VETR3-WE

Retail
$365.24
RRP (Inc. GST)
Colour White Electric (WE)
  • White Electric 1 PCE

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Product brand

Clipsal

Range of product

Series 31VETR

Physical

Device presentation

basic element with full cover plate

Device mounting

flush

[Ue] rated operational voltage

250 V

Rated current

10 A

Fixing mode

by screws

EU RoHS Directive

Under investigation

Material

Material

plastic

Others

Autonomy

15 h

Network frequency

50 Hz

Package 1 Weight

166 g

Package 1 Height

70 mm

Package 1 width

95 mm

Package 1 Length

120 mm
Show all specifications

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • CAD Files and Packs

  • Installation Instruction

  • Certificates (MSDS)

Frequently Asked Questions

hide show

Do you have a two wire time delay switch available?

Yes, we do have a two wire time delay switch available. The part number is 31VETR.

Can part number 31VETR3 run a 1.6kw inductive load?

Yes, they will operate up to 2.4kw inductive load. 

I have 2 wire 31VETR and i dont have enough load will a 31CAP do the trick?

It will improve the situation however we cannot confirm wether it will fix the problem or not. The alternative is to use the three wire design 31VETR3

Is the 2031vetr available in the C2000 series?

It is only available in either the standard series ( 31VETR) or 2000 series ( 2031VETR)

Can the 31VETR3 be used as normally open and normally closed contact?

Yes, the 31VETR3 can be used as normally open and normally closed contact.

For more information, please refer to the link:
https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001273.pdf 

Image result for 31VETR3 Clipsal

What type of switch mechanisms can be used to remotely switch 31VETR3 / 2031VETR3 push button timer?

Momentary switch mechanisms (Bell press mechanisms) can be used to remotely switch 31VETR3 / 2031VETR3. Example of 30 series momentary switch mechanisms are 30PBBP or 30PBBPL.
For further information, please visit 
https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001273.pdf
https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PBBP
https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PBBPL

How can 31VETR3/ 2031VETR3 push button timers be remotely switched?


For 31VETR3/ 2031VETR3 push button timers to be remotely switched, additional switches have to be installed in parallel, allowing the timer to be activated from one or more remote locations as shown in the wiring diagram below:


NOTE:
• The remote switch wiring must be rated for 240V a.c.
• The sum of cable lengths used to connect the remote switches must not exceed 100m.
• Remote switches MUST be Normally Open momentary operation type switches.
 

How does the three wire push button timer 31VETR3 or 2031VETR3 work?

The built in push button on the 31VETR3 or 2031VETR3 has the following functions:
• Pressing the button when the timer is passive will initiate timing and set the load, and indicator, to the active state according to the configuration switch settings.
• Pressing the button during timing will cancel timing and set the load, and indicator, to the passive state according to the configuration switch settings.
• To restart the timer when the load is already on, simply perform consecutive turn-on and turn-off functions.
For further information, please refer to the below link:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=31VETR3
https://www.clipsal.com/Trade/Products/ProductDetail?catno=2031VETR3
 

Is the 2031VETR3 available in a 15 amp version?

No , The 31VETR series are available in 10a versions only
For more information regarding this product range please visit the Clipsal web site on the link provided.
https://www.clipsal.com/Trade/search-results?q=31vetr
User-added image

Do you have a weatherproof push button timer that does 2 hours?

No, not as a single part, but you can make one with a 56PB push button and a 31VETR timer.

Does the 31VETR3 have the option of normally open or normally closed contacts?

Yes, the 31VETR3 has the option of choosing whether the contacts are normally open or normally closed.

Some of the key features are:
  • 3 wire - remote switch input
  • Neon indicator, programmable state
  • Delays between 10 secs and 15 hours
  • Push button to turn load on for set period
  • Toggle push-button to cancel timer
  • Programmable (NO or NC) output
  • No minimum load

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31VETR3
 

Can the 31VETR3 be used with fans ?

Yes the product can be used with fan.
it is compatible with small motor loads max 2A

https://www.clipsal.com/trade/products/ProductDetail?CatNo=31VETR3

https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001273.pdf
 

Key Features

  • 3 wire - remote switch input
  • Neon indicator, programmable state
  • Delays between 10 secs and 15 hours
  • Push button to turn load on for set period
  • Toggle push-button to cancel timer
  • Programmable (NO or NC) output
  • No minimum load
  • Suitable for incandescent or fluorescent lighting
  • 10AX Maximum Load Current
  • OFF Power-Up Status 84mm Mounting Centres
  • AS/NZS3100, AS/NZS3133 AS/NZS CISPR15
  • 0 to 40 deg C Operating Temperature

 
Show More