Side Image of 31E2RUDM Integrally Switched 350W RotaryUniversal Dimmer Mech

Light Dimmer, Universal, ISRC, 350VA, Series 30

Catalogue Number: 31E2RUDM
Side Image of 31E2RUDM Integrally Switched 350W RotaryUniversal Dimmer Mech
Colour: White Electric
Colour: Per UOM Std.
  • White Electric 1 PCE

Specifications

hide show
Range of product
  • Series 30
  • C-Thru
    • Product brand
      Clipsal
      Device presentation
      basic element
      Dimmer type
      universal
      Power consumption in W
      350 W
      [Ue] rated operational voltage
      250 V
      Network frequency
      50 Hz
      Control type
      rotary knob
      Mounting support
      wall
      Standards
    • AS/NZS 3100
    • IEC 60669-2-1
    • AS/NZS CISPR 15
    • IEC 61000-3-2
      • EU RoHS Directive
        Compliant
        Environmental Disclosure
        ENVPEP111278EN_V0

        Frequently Asked Questions

        hide show

        What is the minimum load required for the 31E2RUDM dimmer?

        The minimum load for the 31E2RUDM is 10W

        Light Dimmer Mechanisms, 30 Series Standard Range, Dimmer Mechanism 250V 350W - single Mechanism design, On / Off Rotary, Universal.

        Please see link below for more information and documentation.
        https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2RUDM

        Is the 31E2RUDM-WE available for sale in NZ?

        No, that is not available for sale here in New Zealand.

        Is part no 31E2PUDM available in Black?

        Yes the 31E2PUDM is available in Black

        Can 31E2PUDM be used with LED lights?

        Yes. Dimmer can be used for LED lighting.

        Can you wire the LED in the 31E2PUDM to be always on?

        NO, LED is hard wired into the circuitry.

        What is the part number for the integrally switched rotary universal Dimmer ?

        The part number is a 31E2RUDM .
        For more information regarding this and other products like it please visit the Clipsal.com website on the link provided.
        https://www.clipsal.com/Trade/search-results?q=31e2rudm
        User-added image

        Can I do 2-way switching/dimming using the Clipsal 31E2PUDM?

        No. We don't offer anything in a push button dimmer that can handle 2-way switching.

        Can I do 2-way switching/dimming using the Clipsal 31E2PUDM?

        No. We don't offer anything in a push button dimmer that can handle 2-way switching.

        Can I do 2-way switching/dimming using the Clipsal 31E2PUDM?

        No. We don't offer anything in a push button dimmer that can handle 2-way switching.

        Does the 31E2PUDM have an LED indicator?

        Yes. It has a blue LED indicator which comes on when the load is ON and is off when the load is OFF. This configuration cannot be changed.

        For more information on this product range please visit the Clipsal web site on the link provided
        https://www.clipsal.com/Trade/search-results?q=31e2pudm

        Can 31E2PUDM be used to control the speed of fan?

        Yes. It can handle motor loads up to 350W

        31E2PUDM - do you need an extra switch with this?

        No - it's integrally switched.

         

        what is the replacement dimmer for a 31E800T

        The 31E800T series has been replaced by the 31E4RUD series of dimmers. The 31E4RUD series is a Universal Dimmer which means it is compatible with both Leading and Trailing edge dimming.

        For more information on the 31E4RUD series of dimmers please visit the Clipsal web site on the link https://www.clipsal.com/Trade/search-results?q=31e4rud

        What is the colour of the LED indicator on 31E2PUDM, push button universal dimmer? Can the indicator colour be changed?

        The colour of the LED indicator on 31E2PUDM is blue. Unfortunately the LED indicator colour cannot be changed and is not available in any other colour.
        For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM
        User-added image

        What wattage will the 31E4RUD be able to dim with LED lighting?

        The 31E4RUD will dim up to 400Watt for LED lighting.
        For further information , visit link below;-
        https://www.clipsal.com/Trade/search-results?q=31E4RUD
         

        What is the depth from front to back of a 31E2PUDM?

        The depth is 43mm front to back.

        Is the Clipsal 31E2PUDM compatible with Inductive loads ?

        Yes. The pushbutton universal dimmer 31E2PUDM is compatible with Inductive loads  - 350 Watts Max.
        See the attached brochure for more detail.

        What is the part number for a push button dimmer that would suit the Saturn Communication plates?

        The 31E2PUDM-SG would suit the Saturn communications plate in the Standard colour choices in this range.
        Is not available to suit the Saturn Horizon range.

        Please go to the website via the following link www.clipsal.com/Trade/Products/ProductDetail and check under the Documentation Tab for more information.

        Does the 31E2PUDM turn on and off?

        Yes, the 31E2PUDM does turn on and off as well as dim.

        Some of the key features are:
        • 30 series standard range
        • Leading edge/trailing edge phase control
        • Mounting center: 84 mm

        For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM
         

        Is there a rotary dimmer with an on off state?

        Depending on the design you desire there are two options. There are 2 links for each option. One link for the dimmer and the second for the grid plate to suit.
        _______________________________________________________________________
        Option 1. The Part number is 4061E2RUDM (this part number is for the dimmer mechanism ONLY) Light Dimmer Mechanisms, which suits the 4000 Series Saturn Range (premium range), rated up to 250V 350W - single Mechanism design, On / Off push and rotary for dimmer.

        Dimmer mechanism:
        https://www.clipsal.com/Trade/Products/ProductDetail?catno=4061E2RUDM

        Grid plate:
        https://www.clipsal.com/Trade/Products/ProductDetail?catno=4061VH


        _______________________________________________________________________
        Option 2. The Part number is 31E2RUDM (this part number is for the dimmer mechanism ONLY) Light Dimmer Mechanisms, 30 Series which suits 2000, C2000, SC200 etc (Standard Range), Dimmer Mechanism 250V 350W - single Mechanism design, On / Off push and rotary for dimmer.

        Dimmer mechanism:
        https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2RUDM

        Grid plate:
        https://www.clipsal.com/Trade/Products/ProductDetail?catno=C2031VH

        For further information please visit https://www.clipsal.com/Trade



         
         
         
         

        Can 31E2PUDM be used to turn Off/On ?

        Yes. The 31E2PUDM can operate with Off/on function.
        Some of the key features are:
        • 30 series standard range
        • Leading edge/trailing edge phase control
        • Mounting center: 84 mm
        • 0 to 45 deg C
        • AS/NZS3100, AS/NZS3133, IEC60669
        • Compatible with selected dimmable CFL and LED loads
        • User selectable soft-start / kick-start operation
        • User adjustable minimum brightness
        • Multi-gang capacity up to six (6) dimmer mechanisms per plate
        • Wall or architrave mounting options
        • Wide range of plate styles and colour variants available
        • Suitable for new installations or retro-fit applications
        • Inbuilt over-current and over-temperature protection
        • Full short circuit protection
        • Fitted with suppressors to minimise radio frequency interference
        • Complies with Australian and international EMC standards
        For further information, please visit: https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM

         

        Does the Clipsal 31E2PUDM2 PB dimmer capable of 2 way Switching?

        No, it is a one way switch and cannot be used in a two way switching situation.
         

        Does the 31E2PUDM-WE do 2-way dimming?

        Unfortunately this does not do 2 way dimming.
        We do not have a push button dimmer in our range which does at this time.
        If you want 2 way dimming, you need to use a 32e450udm and a 30m series mechanism which will only give you a dimmer on one side of your 2 way switching.

        Please go to the website via the following link www.clipsal.com/Trade/Products/ProductDetail and check under the Documentation Tab for more information.

        Can the indicator status be changed on 31E2PUDM, 30 series universal push button dimmer mechanism ?

        Unfortunately not, the indicator status cannot be changed on 31E2PUDM31E2PUDM dimmer incorporates a LED indicator to display the status of the load as stated below:
        LOAD ON - INDICATOR ON
        LOAD OFF- INDICATOR OFF
        For further information, please refer to the attached installation instruction.

        Can a 31E2PUDM be used to control a ceiling fan? be used to control a ceiling fan?

        Yes, the 31E2PUDM can be used to control small motors such as ceiling fans or exhaust fans.

        Is there a Push Button Dimmer available in black in the Clipsal 30 Series?

        Yes, the 31E2PUDM is available in black. This item is not a stocked item but it can be ordered in.

        Please visit this link for more information - https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM

        Product code: 31E2PUDM-BK

        Why is the 31E4RUD getting so hot? it is controlling a 750W fan instructions say it can control small motor up to 800W?

        This is due to the fact that its operating at a high temp purely because its running near its peak. This should be no issue as it has thermal protection and the unit will shut off if it gets too hot.

        Does the 31E2PUDM-WE do two way dimming.

        PUDM is not appropriate for two way. Can only have a dimmer on one end. That dimmer must be a rotary non-intergrated, in-line with a standard switch 32e450udm and a 30m mechanism.
        Please see brochure for entire range of pushbutton dimmers and features.
        https://updates.clipsal.com/ClipsalOnline/Files/Brochures/A0000258.pdf

        Can you obtain a 31E2PUDM without an LED indicator ?

        No , as it is an electronic dimmer mechanism which is integrally switched there is a requirement to have an LED indicator to indicate light status.
        The configuration of the LED Indicator cannot be modified.
        For more information on this product range please visit the Clipsal web site on the link provided
        https://www.clipsal.com/Trade/search-results?q=31e2pudm

        What globe/ lamp restrictions apply when using the dimmer 31E2RUDM?

        The dimmer is only rated to 350W therefore the largest globe you can control is 350W.
        All types of lamps should be compatible as its a universal dimmer. However, with LED globes there maybe some trial and error needed.
        Some of the dimmers key features are:
        • 30 series standard range
        • Leading edge/trailing edge phase control
        • Mounting center: 84 mm
        • 0 to 45 deg C
        • AS/NZS3100, IEC60669-2-1
        • <
        • Compatible with selected dimmable CFL and LED loads
        • User selectable soft-start / kick-start operation
        • User adjustable minimum brightness
        • Multi-gang capacity up to six (6) dimmer mechanisms per plate
        • Wall or architrave mounting options
        • Wide range of plate styles and colour variants available
        • Suitable for new installations or retro-fit applications
        • Inbuilt over-current and over-temperature protection
        • Full short circuit protection
        • Fitted with suppressors to minimise radio frequency interference
        • Complies with Australian and international EMC standards
        For further inforation please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2RUDM
         

        What are the characteristics of a 4061E2PUDM-TR?

        The 4061E2PUDM-TR has the function of a push button switch as well as a rotary dimmer all rolled into one which is a great space saver for the Saturn series.
        This is also available in all of our ranges from the standard series to slimline.
        The part number for the mechanism only for these series is 31E2PUDM.
         
        Please go to the web site via the following link www.clipsal.com/Trade/search-results and check under the Documentation Tab for more information.
         

        What is an Impress dimmer?

        The Impress dimmer is a push button dimmer designed to complement our Impress series of switch mechs . It is special in that it does not require a separate mechanism to switch on the circuit as it is integrally switched incorporating ON/OFF and Dimming control . The part number for the Impress Dimmer is 31E2PUDM
        For more information regarding either Impress or Dimmers please visit the Clipsal web site on the links provided
        https://www.clipsal.com/Trade/search-results?q=31e2pudm
        https://www.clipsal.com/Trade/search-results?q=Impress
        https://www.clipsal.com/Trade/search-results?q=dimmers

         

        Is Clipsals 1000va dimmer still available

        No , the 32/1000 has been discontinued . The closest replacement is the 31E4RUD range which is rated to 800VA

        Please visit the Clipsal web site for more information and specifications regarding this product . https://www.clipsal.com/Trade/search-results?q=31e4rud

        Do you still do 1000VA dimmers?

        No unfortunately, we only do an 800W dimmer which is the 31E4RUD but if the load is cfl etc it can only handle 400W

        Can you two-way a push button dimmer (4061E2PUDM, 31E2PUDM)?

        No unfortunately this is a one-way device and cannot be two-wayed as it is integrally switched. If you wish to two-way dim a circuit you will need to use a master and slave mechanism in the OneTouch Series. To create such a setup you would require a 2X 4061TC, 60TDM and a 60TDSM.

        Can 4061E2RUDM be used in a 2 way circuit?

        No this product is only suitable for a One Way application.

        please refer to link below for more detail.

        https://www.clipsal.com/Trade/Products/ProductDetail?catno=4061E2RUDM

        Can the dimmer 31E2PUDM be used in two way operation?

        No, unfortunately it is only suitable for one way operation.
        Some of its key features are:
        • 30 series standard range
        • Leading edge/trailing edge phase control
        • Mounting center: 84 mm
        • 0 to 45 deg C
        • AS/NZS3100, AS/NZS3133, IEC60669
        • <
        • Compatible with selected dimmable CFL and LED loads
        • User selectable soft-start / kick-start operation
        • User adjustable minimum brightness
        • Multi-gang capacity up to six (6) dimmer mechanisms per plate
        • Wall or architrave mounting options
        • Wide range of plate styles and colour variants available
        • Suitable for new installations or retro-fit applications
        • Inbuilt over-current and over-temperature protection
        • Full short circuit protection
        • Fitted with suppressors to minimise radio frequency interference
        • Complies with Australian and international EMC standards
        For further information on this product please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM
         

        Saturn Zen Mechs

        The mechs that are used in standard Saturn are also used in Saturn Zen with the exceptions of rotary dimmer & fan controller mechs

        Dimmer part number is 4061E2RUDM combined with Z4062EDIM-KB

        Fan module is Z4060CSFM

        Which universal dimmer fits in the 4066VH?

        You can put the 4061E2PUDM or the 4061E2RUDM into the 4066VH.

        For more information, please refer to the link:
        https://www.clipsal.com/Trade/Products/ProductDetail?catno=4061E2PUDM 
        https://www.clipsal.com/Trade/Products/ProductDetail?catno=4061E2RUDM