switch time delay extra sw.

Pneumatic Timer Controls, Time Delay Switch 250V 10A - with extra Switch

Catalogue Number: 319X
switch time delay extra sw.
Retail
$169.56
RRP (Inc. GST)
Colour White Electric (WE)
  • White Electric 1 PCE

Specifications

hide show
Product brand
Clipsal
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Weight
121 g
Package 1 Height
5 cm
Package 1 width
15 cm
Package 1 Length
20.3 cm
Unit Type of Package 2
BB1
Number of Units in Package 2
5
Package 2 Weight
682 g
Package 2 Height
12.6 cm
Package 2 width
14.4 cm
Package 2 Length
15.8 cm
Unit Type of Package 3
CAR
Number of Units in Package 3
20
Package 3 Weight
2.8 kg
Package 3 Height
23.7 cm
Package 3 width
20.3 cm
Package 3 Length
30 cm
EU RoHS Directive
Under investigation
Environmental Disclosure
ENVPEP120506EN

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • Installation Instruction

  • Certificates (MSDS)

Frequently Asked Questions

hide show

How long does part number 319 run for?

Part number 319 can be run up to 20mins.

What is part number for 319 reverse action?

The part number is  319RA.

Does part number 319 have N/C contact?

Yes it does.

What is the maximum time for a 319 timer?

319 Pneumatic timer can be set from 30 seconds to 20 minutes

please see link below for further information

https://www.clipsal.com/Trade/Products/ProductDetail?catno=319

Can the 319 switches be wired in two way?

Yes, the 319 pneumatic switches can be wired in parallel so that they can switch the same load.

For further information please visit https://www.clipsal.com/Trade/search-results?q=319

What is the part number of the mounting block suitable for 319 pneumatic timer?

238/25 mounting block is suitable for 319 pneumatic timer. 238/25 is a 1 Gang Surface Mounting Box, with 25mm end entries and dimensions of 115mm( length), 74(Width), 42(Depth).
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=238/25
User-added image

Is the time delay switch 319 compatible with two way switching?

No, the time delay switch 319 isn't compatible with two way switching.

For further information on this product please visit https://www.clipsal.com/Trade/search-results?q=319
 

Safety shuddered outlets will not accept a plug

Issue:

Surge safety shuddered outlet is not accepting my device's electrical plug.

Product Line:

APC Performance Surge Arrest

Environment:

P11VXXX

Cause:

These outlets are designed to be child safe, they open only when equal pressure is applied to both shudders. If you lean more on one side then the shudder will not slide open.

Resolution:

Holding the molded portion of the equipment's plug try to adjust the alignment to equally distribute pressure across both prongs.

Plugs that have cord at a 90 degree angle to their prongs (right-angled plugs) can be more difficult to insert than others."
 

What is the adjustable range of time for the CLipsal 319-WE?

It is adjustable from 30 seconds to 20 minutes.

What time adjustment is possible for a Clipsal 319 Timer?

Can be set between 2 and 10 minutes but will only be approximate.

IMPORTANT NOTES:
• This time delay switch operates on the air bleed principle and therefore it is not
possible to calibrate precisely. The timing will vary slightly with manufacturing
tolerances, air temperatures, relative humidity, and barometric pressure.

APC Security Advisory - Vulnerabilities in TCP


Issue

Fundamental weaknesses in TCP/IP can allow an attacker to corrupt data, hijack sessions, or cause a denial-of-service condition (DOS or DDOS). This advisory is in response to Technical Cyber Security Alert TA04-111A. System administrators who use the APC TCP/IP-based network products should read this advisory.


Product Line

  • All APC products that connect to a TCP/IP network



Environment

  • Utilizing an APC product that connects to a TCP/IP network



Cause

Unlike the Border Gateway Protocol (BGP) used by routers, TCP connections used with APC products are typically transient. This means that an attack would have to be performed while the product was being actively accessed by a user. Furthermore, TCP window sizes for APC applications are typically very small and make it more difficult for an attacker.


Resolution


If available, deploy and use cryptographically secure protocols like SSL/TLS and SSH. These protocols prevent attackers from corrupting data and hijacking sessions. However, they do not prevent denial-of-service since authentication is performed above the transport layer (TCP).

To reduce the possibility of a denial-of-service condition it is recommended that APC products be protected by a firewall that can detect and respond to that class of attacks. In general, US-CERT recommends utilizing network security tactics such as Deploying and Use Cryptographically Secure Protocols, Ingress filtering, Network Isolation, and Egress filtering.


Status of this notice: INTERIM

THIS IS AN INTERIM ADVISORY. ALTHOUGH APC CANNOT GUARANTEE THE ACCURACY OF ALL STATEMENTS IN THIS NOTICE, ALL OF THE FACTS HAVE BEEN CHECKED TO THE BEST OF OUR ABILITY. APC DOES NOT ANTICIPATE ISSUING UPDATED VERSIONS OF THIS ADVISORY UNLESS THERE IS SOME MATERIAL CHANGE IN THE FACTS. SHOULD THERE BE A SIGNIFICANT CHANGE IN THE FACTS, APC MAY UPDATE THIS ADVISORY. A STAND-ALONE COPY OR PARAPHRASE OF THE TEXT OF THIS SECURITY ADVISORY THAT OMITS THE DISTRIBUTION URL IN THE FOLLOWING SECTION IS AN UNCONTROLLED COPY, AND MAY LACK IMPORTANT INFORMATION OR CONTAIN FACTUAL ERRORS.

IN NO EVENT SHALL EITHER APC, ITS OFFICERS, DIRECTORS, AFFILIATES OR EMPLOYEES, BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NO LIMITED TO, LOSS OF PROFITS ARISING OUT OF THE USE OR IMPLEMENTATION OF THE INFORMATION CONTAINED HEREIN HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN AN ACTION FOR CONTRACT, STRICT LIABILITY OR TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, WHETHER OR NOT APC HAS BEEN ADVISED OR THE POSSIBILITY OF SUCH DAMAGE AND NOTWITHSTANDING THE FAILURE OF ESSENTIAL PURPOSE OF ANY REMEDY.


References

https://codeverge.com/grc.security.software/us-cert-technical-cyber-security-alert/1649925