switch time delay rev action

Pneumatic Timer Controls, Time Delay Switch 250V 10A - reverse action

Catalogue Number: 319RA
switch time delay rev action
Retail
$159.46
RRP (Inc. GST)
Colour White Electric (WE)
  • White Electric 1 PCE

Specifications

hide show
Product brand
Clipsal
Range of product
Series 319
Device presentation
basic element with full cover plate
Device mounting
flush
Material
plastic
Surface finish
glossy
Autonomy
0.0083...0.33 h
[Ue] rated operational voltage
250 V
Network frequency
50/60 Hz
Rated current
10 A
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Weight
143.9 g
Package 1 Height
71 mm
Package 1 width
94 mm
Package 1 Length
116 mm
EU RoHS Directive
Under investigation
Environmental Disclosure
ENVPEP120506EN

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • Installation Instruction

  • Certificates (MSDS)

Frequently Asked Questions

hide show

Does part number 319RA come with 1 NC contact?

Yes the 319RA comes with 1 NC contact.

Which cable should be used when making Interbus-S cables longer than 100cm?

There are two Belden cables that can be used.
1. Belden 3120A for signal only.
2. Belden 3119A for signal and power.


Is there a gland on the back of the 319HP

 Yes there is

What is the dimension of 31BLA and 32BLA intermediate sized, vertical mount, flush switches?

The dimension of 31BLA and 32BLA intermediate sized flush switches are 95 mm Length x 48 mm Width x 10 mm Depth. Mounting centres are 78mm apart. The switches are rated to 250V AC/10A, 1 way/2 way.
For further information, please visit https://updates.clipsal.com/ClipsalOnline/Files/Brochures/A0000108.pdf


 

What is the part number for the 31BLA single switch plate only?

The part number for the 31BLA single switch plate only is 31BL.

Plate Only No Mechanisms.

Some of the key features are:

  • 1 gang
  • Dimension: 95 mm Length x 48 mm Width x 10 mm Depth
  • 78 mm mounting centre
  • Vertical mount

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31BL

What is the part number for a surface mount enclosure to suit 319HP Pneumatic timer?

238/25 is a surface mount enclosure with 25mm end entries that will suit 319HP.

For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=238/25

What is the IP rating for the 319HP, pneumatic timer?

The IP rating for the 319HP, pneumatic timer is - IP65

For further information, visit the link below:-
https://www.clipsal.com/Trade/search-results?q=319HP
User-added image

 

What is the maximum time for a Clipsal 319HP time delay switch

Primarily designed for up to 10 minutes with care 20 minutes may be possible.

FYI We now have a range of new timers and time clocks modules which can be installed into any iconic plate or a installed and triggered by any momentary switch they can be installed placed inside the flush box

What is the part number for weatherproof / hose proof pneumatic timer?

319HP is the part number for weatherproof / hose proof pneumatic timer rated to 250V, 50Hz, 10A-6AX.
IP rating of 319HP is IP56.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=319HP

 

What is the dimension of INS43630, Optiline 50 manual pull up furniture box?

The dimension of INS43630 is 319mm /Ø112mm. Hole dimension: Ø100mm.
INS43630 Pop-up function desk unit, one-sided, manual. Configured with 1x double power outlet, Australian standard, with 3m 1.5mm2 external cable without plug and 2x 30 Mech/keystone data outlet. When inactive, the box lies flush with the desk-top. By a light pressure on the top, the box can be lifted up from the desk surface. As soon as the box is not in use, it is easily pressed back to the flush level. Earthed.
Material: Aluminium, natural anodized, and powder coated zinc and aluminum.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=INS43630
 

Can you have a diffrent key other than the original 455 Key for the harmony key switches?

Yes, for an example you can order a 458 key and add the suffix 10
See table:
Key Number Suffix to be added
458A 10
421E 12
520E 14
3131A 20

For further information please see https://www.schneider-electric.com.au/en/all-products

https://www.tlauk.net/shop/image/cache/data/pushbuttons-switches-bodies/Schneider_ZB4BG_key_switch-500x500.jpg
 

Are the ZB4 / ZB5 keyed selector switches all keyed alike?

Issue:
What is the standard key number of the ZB4 / ZB5 selector switches?

Product Line:
Harmony Pushbuttons

Environment:
All Products

Resolution:
Standard operators will be keyed alike with a Ronis 455 key. Other keys changes can be obtained by adding the proper suffix to the part number.
Example: ZB4BG3 12 will give a ZB4BG3 with a 421E key. Here are some standard key changes. Other key changes are available. Suggest checking the Q2C profiles for other key changes.
Add suffix 12 for 421E key.
Add suffix 10 for 458A key.
Add suffix 14 for 520E key.
Add suffix 20 for 3131A key.

 
Show More