Use VDIR534830 for the 300m drum
There are 36 boxes (Rolls) of 305M Cable per pallet.
The 3105RG6Q3B RG6 quad shield coax 305m cable is FOXTEL and Austar approved.
The Foxtel approval number is F10129 and the Austar approval number is P07982.
The part code is 5005C305B, sold in 305m boxes.
2D4P6AIPV3R-BU comes in a 305M box
The part code is ACT4P6UPEJ3RBK and it comes in a 305m Box.
Yes, the part number is 30M is a -3A.
The part number for the adaptor plate for mounting a ZB4 unit into a 30mm hole is ZB4BZ012.
The maximum length of a DALI line is 300m (when using minimum 1.5mm cable). If there is a specific requirement to use a line length of over 300m, it is possible to use a device such as a DALI repeater. As this is not a DALI CONTROL product, a 3rd party device would need to be sourced
No, however we have a sensor mechanism to suit the PDL range. the part number is 100MPIR.
Are there 30mm light modules for 480V with LED lights?
30mm Operators - GIC Product
There are several light modules available:
9001KM5LG - green
9001KM5LR - red
9001KM5LY - yellow
Do we offer a Keyed 30mm Emergency Stop Mushroom Head Push button
No. We don`t offer a key release mushroom button in any of the 30 mm lines. Only on the 22mm.
The part code is 5031NMML
Does Square D offer a 30mm pusbutton turn to release Emergency Stop with trigger-action?
30mm Push Buttons
9001 Type K and SK Heavy Duty Operators
Clarify that Schneider Electric offers a trigger-action Emergency Stop.
The newly introduced 9001KR16 and 9001SKR16 Harmony 30mm Turn-to-Release includes the trigger-action feature.
Do we offer a flashing 24V pilot light in the 9001 30mm line? What is the part number for a Flashing amber 24 vdc pilot light 30mm?
30mm Push Buttons
9001K/SK light modules
Looking for a flashing pilot light.
This is not offered in the 30mm lines.
Shallow approx 25mm + toggle
Porcelain base 30mm + toggle
No longer available use 30-20mm adaptor and 20mm plug
Is there a contact block in 30mm Push to Test Pilot Lights
Pushbuttons / Pilot Lights
Yes. 9001KA1 prewired.
Difference between the 'STBXCA1003' or 'LU9RCD03' cable.
Advantys Configuration software.
The pinouts for both cables are identical. The only difference is the type of connector that is used on
the end of the cable and the length of the cable. The 'LU9RCD03' uses a straight connector and an
angled connector and is 30cm long. The STBXCA1003 uses two angled connectors and is 4.5m long.
Legacy KB System (APS) Data: RESL198335 V1.0, Originally authored by AlCh on 05/04/2009, Last Edited by AlCh on 05/04/2009
Related ranges: Advantys STB
When wall mount the 755RLPSMA2, the minimum distance it can be mounted from the ceiling is 30cm with a maximum of 50cm.
Some of the key features are:
- New look design with easy to use test/hush button
- Sealed-in rechargeable lithium backup battery
- Quality optical chamber with stainless steel insect screen
- Easy installation and maintenance
- Wired interconnect feature (up to 40 alarms)
- Optional relay or wireless interconnect bases
- Backwards compatible with 755PSMA and 755SMA mounting bases
- Robust digital design
For further information please visit www.clipsal.com/Trade/search-results?q=755RLP
Is there any mounting kit or adapter that we can use for a 22mm to a 30mm hole?
22mm Push Buttons / Operator Interfaces
All Product Lines
Can not find it in the Digest
Use mounting kit part number ZB4BZ021.
Does Square D offer or have a tool for punching/drawing a hole for 30mm push buttons?
Need to make a knock out on the undrilled enclosures for 30mm operators.
Square D doesn not offer that tool. We can recommend Greenlee knoct out punch #60242.
All category data cables are defined by their maximum bandwidth at 100m. So 100m is the maximum recommended cable run.
Cat 7A only comes in orange sheath to distinguish from other Data cabling and is supplied in a 305M box.
Please see following link for technical specifications.
Yes, we sell RG6 Cable that is able to be buried. The 3105RG6Q3RF is flooded cable with an anti-corrosive sealant impregnated into the body of the shielding.
Some of the key features of this product:
- Coaxial cable to suit satellite TV
- Cable type: RG6
- Quad shield
- Flood burial
- Pack size: 305m reel
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?CatNo=3105RG6Q3RF
Requested to clarify if the 9001K51 and 9001K52 is metal or plastic before purchase.
30mm Closing Plate
30mm K and SK control stations, 9001K51 and 9001K52 30mm 30 mm 9001 9001k plug hole enclosure ky sky kyp skyp control station box accessories accessory Push Buttons
Request from vendor before purchase is placed
The closing plate both 9001K51 and 9001K52 is plastic with a metal ring nut that secures the plate to the enclosure. Meets UL and Nema 1, 2, 3, 4, 4x, 6, 12, and 13.
Dimensions are Height 347mm , width 514mm and depth of 30mm
What size is the mounting hole for a 9001KX 30mm pushbutton?
Pushbuttons and Operator Interface
9001K, 9001SK and 900KX
31 mm or 1.22 inches.
Is a 9001KY3 available with an extra conduit entry in the top?
9001KY/SKY Control Stations
Need clarification before control station is installed.
No, the 9001KY enclosures have a bottom conduit opening standard. Extra conduit openings are not available.
No. Unfortunately this would need to be done as a special and be quoted up by the quotes team.
Unfortunately, this part is unavailable. we only offer a 10A version. The part number for the 10A version is 30HM.
The part number for a 30M in Arctic Silver is 30M-3A.
Some of the key features are:
- Terminal bores of 4.1 mm diameter accommodate 4 x 1.5 sq mm or 3 x 2.5 sq mm cable
- Body fits 22 mm diameter hole
- Motor rating is 100
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=30M
Customer does not want the ATVPOT25K, because this is a 22mm operator. The end user only wants to use 30mm operators.
9001K2107 is a 5k ohm, 30mm speed potentiometer available from Schneider Electric. This inlcudes the operator, speed pot and legend plate.
See attached screen shot for other options, but remember to confirm the allowable potentiometer range for the specific drive.
Yes, it is a 30M mech and can be two way wired
The part number is 30USM-RD.
No. Unfortunately, the part number 780K1 can only be used with standard 30M mechs.
RF Range (line of sight) will be: 100m free air, 30m indoors