To obtain a surge protected 15A outlet you will need to purchase a C2015/15X and a 30SFM and replace the extra switch in the outlet with the 30SFM surge protector mechanism and then wire accordingly.
For some reason we have given the 30CSFM a 10A rating. The mechanism only needs to be rated for the correct voltage and correct fault current the amperage rating is irrelevant as this device does not have the load passing through it, it is there merely for fault conditions.
Not available as complete. Use 2 x 30PFM and a 2 gang plate
The knob part number for a 30CSFM is 2031VF3CB-KB-**.
** - required colour of the knob.
For more information on this product range please visit the Clipsal.com website on the link provided
The capacitor is not sold separately.
No, however we do sell a 30RSM3 which is a 3 position switch. it looks entierly different how ever it has the same operating characteristics.
|The 30csfm is designed only to run one fan at a time. To run multiple fans (up to 8) we recommend the use of the 32E500FM-we
The part number of the three speed fan controller mechanism in 2031VF3CSF is 30CSFM. The Clipsal 30CSFM Series Three Speed Fan Controller is designed to
provide discreet, linear speed control over small motor loads, including Clipsal’s extensive range of Airflow Ceiling Sweep Fans.
For further information please refer to the below link:
Not directly , to use the Saturn series with Phone / Data mechanisms etc the Saturn communication plates are required. These are compatible with the 30 series data and telephone mechanisms.
For more information on both Saturn and 30 series please visit the Clipsal web site on the links provided
Yes, the 40CSFM is the same as the 40RSM3 but without the capacitor and pictogram on the front.
No, unfortunately this mechanism does'nt fit the Saturn series. However, this mechanism will fit into the coms Saturn series comunication plate 4031VH.
Yes it can be used on split phase fans
The part number for the knob only is 2031VFCB-KB
Part number for knob only will be 2031VF3CB-KB-WE
Unfortunately this is not a standard preassembeled part. However, you can use a P30Z (Prestige Bezzel) with a 30PFM (30 F-Type mechanism).
Some of the key features for the P30Z are:
- Mounting accessories
- Switch mechanisms
- Prestige panel
- Suitable for mounting standard Clipsal 30 series mechanisms to the Prestige P2000 collection
- Dimensions: 38 mm Length x 38 mm Width x 18 mm Depth
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=P30Z
Some of the key features for the 30PFM are:
- Pay TV approved outlet rated to 3 GHz
- Mating connections screw into the connector to provide minimum signal loss and optimum impedance matching to substantially reduce reflections and ghosting
- TV antenna socket 75 Ohm
- Suits PAY TV
- IR pass through
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PFM
The keys for part number 30TKM are only available as a special.
We don’t do them as a standard part.
No, Not Available in Black
The part number is as follows: 2031VF3CB-KB-WE
The part number for Anthracite fan knob to suit is a 40RSM3KB.
The 40CSFM only comes in the colour Vivid White. However if another colour is required an additional knob kit can be purchased.
The knob kit comes in a packet with all 4 colour options. The part number is 40RSM3KB
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=40RSM3KB
Not available, you can use the Clipsal 30TKM this can be fitted in a single VH plate (C2031VH)
You will need to use the 4032VH plates and any Clipsal 30 Series data and AV mechs,
these plates will aslo fit any 30 series switch mech,
EG 30TV75M, 30PFM, 30HDMIA, VDIB17756U-we
Slimline fits all 30 Series mechs. Permanent connection unit is the 38TB, phone mech is 30BTM
Any 30 series Clipsal mech will fit. 30BTM is the telephone mech, available in white only. 30FFPFMS is the TV mech.
You can use 4030VH plates and the 30 series mechs i.e. VDIB17735U, VDIB17756U, VDIB17736U & 30BTM
No. Our Draftstoppa only suits round exhaust fans up to 300mm diameter.
B12/30/6 = 12-Gang Switch Plate. 2 rows of 6. Stainless steel. 303mm 120mm
12/30/162/3 = 12-Gang Switch Plate. 4 rows of 3. Stainless steel. 165mm 215mm
Includes stainless steel fascia with grid and wall box. Standard grid colours - White Electric (WE) and Black (BK).