Not available as complete. Use 2 x 30PFM and a 2 gang plate
The shroud to suit the 30PB is the 90FS-BK.
Not directly , to use the Saturn series with Phone / Data mechanisms etc the Saturn communication plates are required. These are compatible with the 30 series data and telephone mechanisms.
For more information on both Saturn and 30 series please visit the Clipsal web site on the links provided
No. unfortunately, part number 30PBI is not available in Black.
The 30PB is available in both black and white.
30PBI is not available with an LED
No, unfortunately this mechanism does'nt fit the Saturn series. However, this mechanism will fit into the coms Saturn series comunication plate 4031VH.
No we don't have a keystone to 30 series mech adapter.
The 30PRJ is specifically designed for Commscope Products and does not fit Keystone jacks.
30PBI is the 30 series intermediate mechanism. This does not have an LED indicator.
No it does not.
30PBI - Push-button Impress Series, No LED Indication, 250V 10AX - Intermediate Push-button.
No, the 30PBI is not available in Black as a standard item. However, it can be created as MTO ( made to order ) custom special.
Unfortunately this is not a standard preassembeled part. However, you can use a P30Z (Prestige Bezzel) with a 30PFM (30 F-Type mechanism).
Some of the key features for the P30Z are:
- Mounting accessories
- Switch mechanisms
- Prestige panel
- Suitable for mounting standard Clipsal 30 series mechanisms to the Prestige P2000 collection
- Dimensions: 38 mm Length x 38 mm Width x 18 mm Depth
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=P30Z
Some of the key features for the 30PFM are:
- Pay TV approved outlet rated to 3 GHz
- Mating connections screw into the connector to provide minimum signal loss and optimum impedance matching to substantially reduce reflections and ghosting
- TV antenna socket 75 Ohm
- Suits PAY TV
- IR pass through
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PFM
The keys for part number 30TKM are only available as a special.
We don’t do them as a standard part.
Part codes you need to use SC2032VH + 30PBL + 38TB
Use a 4032VH + 38TB + 30PBL - not one touch but closest match
No, Not Available in Black
Yes, the 30PID
will fit in any plate that takes a 30 series mechanism.
Some of the key features are:
- For 30 series ID circuit plug
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30PID
To obtain a surge protected 15A outlet you will need to purchase a C2015/15X and a 30SFM and replace the extra switch in the outlet with the 30SFM surge protector mechanism and then wire accordingly.
For some reason we have given the 30CSFM a 10A rating. The mechanism only needs to be rated for the correct voltage and correct fault current the amperage rating is irrelevant as this device does not have the load passing through it, it is there merely for fault conditions.
No it isn't but the 30PBBP is
Not available, you can use the Clipsal 30TKM this can be fitted in a single VH plate (C2031VH)
You will need to use the 4032VH plates and any Clipsal 30 Series data and AV mechs,
these plates will aslo fit any 30 series switch mech,
EG 30TV75M, 30PFM, 30HDMIA, VDIB17756U-we
Unfortunately not, 30PB or 30PBL are switch mechanisms which can be used for ON/OFF. They cannot be used for dimming lights.
is 30 series Standard Range universal push button dimmer mechanism, 250V 350W, that can be used for On / Off and dimming the lights. These are designed for
one-way operation only.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM
The Part number for the lens is a 30PID-2-CL
Slimline fits all 30 Series mechs. Permanent connection unit is the 38TB, phone mech is 30BTM
Any 30 series Clipsal mech will fit. 30BTM is the telephone mech, available in white only. 30FFPFMS is the TV mech.
The parts you need is 60PBL if the 406* plates are used and a 30PBL if the 403* plates are used
You can use 4030VH plates and the 30 series mechs i.e. VDIB17735U, VDIB17756U, VDIB17736U & 30BTM
No colour choice for the LED indicators on 30PBL. The indicators are blue in colour on the 30PBL.
No. Our Draftstoppa only suits round exhaust fans up to 300mm diameter.
The 30PRJ is our keystone adaptor clip. It is available in WE and BK as standard. Other colours maybe possible as a special.
60PBI is the Saturn intermediate mechanism. This does not have an LED indicator.
B12/30/6 = 12-Gang Switch Plate. 2 rows of 6. Stainless steel. 303mm 120mm
12/30/162/3 = 12-Gang Switch Plate. 4 rows of 3. Stainless steel. 165mm 215mm
Includes stainless steel fascia with grid and wall box. Standard grid colours - White Electric (WE) and Black (BK).