Use VDIR534830 for the 300m drum
There are 36 boxes (Rolls) of 305M Cable per pallet.
Yes. Part numbers 30PB & 30PBL are available in Black.
Part number 30PB will fit standard into 4031VH plate.
The 3105RG6Q3B RG6 quad shield coax 305m cable is FOXTEL and Austar approved.
The Foxtel approval number is F10129 and the Austar approval number is P07982.
Not available as complete. Use 2 x 30PFM and a 2 gang plate
Yes, 30PB is 2 way. The part number for the intermediate mech is 30PBI.
The part code is 5005C305B, sold in 305m boxes.
2D4P6AIPV3R-BU comes in a 305M box
Part code is 30P for the blanking module
The 30PB is available in both black and white.
The part code is ACT4P6UPEJ3RBK and it comes in a 305m Box.
There is no such option but if the switch mech is removed from behind the plate then the push button cap can remain, alternatively replace with 4060vx
Unfortunately not, 30PB or 30PBL are switch mechanisms which can be used for ON/OFF. They cannot be used for dimming lights.
is 30 series Standard Range universal push button dimmer mechanism, 250V 350W, that can be used for On / Off and dimming the lights. These are designed for
one-way operation only.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM
You can try the Clipsal BSL31VH or BBSL31VH with a 30PB mech.
The profile will be not much more than the 1.2mm of the plate.
The shroud to suit the 30PB is the 90FS-BK.
Yes, the part number is 30M is a -3A.
The part number for the adaptor plate for mounting a ZB4 unit into a 30mm hole is ZB4BZ012.
The maximum length of a DALI line is 300m (when using minimum 1.5mm cable). If there is a specific requirement to use a line length of over 300m, it is possible to use a device such as a DALI repeater. As this is not a DALI CONTROL product, a 3rd party device would need to be sourced
YES, they also fit into the Clipsal Classic C2000 Series, Clipsal Standard Series and into the Saturn Series custom Grid and Plates to suit 30 Series mechanisms.
No, however we have a sensor mechanism to suit the PDL range. the part number is 100MPIR.
Are there 30mm light modules for 480V with LED lights?
30mm Operators - GIC Product
There are several light modules available:
9001KM5LG - green
9001KM5LR - red
9001KM5LY - yellow
Do we offer a Keyed 30mm Emergency Stop Mushroom Head Push button
No. We don`t offer a key release mushroom button in any of the 30 mm lines. Only on the 22mm.
The part code is 5031NMML
Does Square D offer a 30mm pusbutton turn to release Emergency Stop with trigger-action?
30mm Push Buttons
9001 Type K and SK Heavy Duty Operators
Clarify that Schneider Electric offers a trigger-action Emergency Stop.
The newly introduced 9001KR16 and 9001SKR16 Harmony 30mm Turn-to-Release includes the trigger-action feature.
Do we offer a flashing 24V pilot light in the 9001 30mm line? What is the part number for a Flashing amber 24 vdc pilot light 30mm?
30mm Push Buttons
9001K/SK light modules
Looking for a flashing pilot light.
This is not offered in the 30mm lines.
Shallow approx 25mm + toggle
Porcelain base 30mm + toggle
No longer available use 30-20mm adaptor and 20mm plug
Is there a contact block in 30mm Push to Test Pilot Lights
Pushbuttons / Pilot Lights
Yes. 9001KA1 prewired.
Not directly , to use the Saturn series with Phone / Data mechanisms etc the Saturn communication plates are required. These are compatible with the 30 series data and telephone mechanisms.
For more information on both Saturn and 30 series please visit the Clipsal web site on the links provided
Difference between the 'STBXCA1003' or 'LU9RCD03' cable.
Advantys Configuration software.
The pinouts for both cables are identical. The only difference is the type of connector that is used on
the end of the cable and the length of the cable. The 'LU9RCD03' uses a straight connector and an
angled connector and is 30cm long. The STBXCA1003 uses two angled connectors and is 4.5m long.
Legacy KB System (APS) Data: RESL198335 V1.0, Originally authored by AlCh on 05/04/2009, Last Edited by AlCh on 05/04/2009
Related ranges: Advantys STB
When wall mount the 755RLPSMA2, the minimum distance it can be mounted from the ceiling is 30cm with a maximum of 50cm.
Some of the key features are:
- New look design with easy to use test/hush button
- Sealed-in rechargeable lithium backup battery
- Quality optical chamber with stainless steel insect screen
- Easy installation and maintenance
- Wired interconnect feature (up to 40 alarms)
- Optional relay or wireless interconnect bases
- Backwards compatible with 755PSMA and 755SMA mounting bases
- Robust digital design
For further information please visit www.clipsal.com/Trade/search-results?q=755RLP
Yes, the part number is a 31E2PUDM
Some of the key features are:
- 30 series standard range
- Leading edge/trailing edge phase control
- Mounting center: 84 mm
- 0 to 45 deg C
- AS/NZS3100, AS/NZS3133, IEC60669
- Compatible with selected dimmable CFL and LED loads
- User selectable soft-start / kick-start operation
- User adjustable minimum brightness
- Multi-gang capacity up to six (6) dimmer mechanisms per plate
- Wall or architrave mounting options
- Wide range of plate styles and colour variants available
- Suitable for new installations or retro-fit applications
- Inbuilt over-current and over-temperature protection
- Full short circuit protection
- Fitted with suppressors to minimise radio frequency interference
- Complies with Australian and international EMC standards
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM