The 30M Series products have fluorescent capacity of approximately 5A
Both the 30MD and 30MI are not recommended for switching of multiple fluorescent fittings.
For further information please visit https://www.clipsal.com/Trade
Yes the part number is 30MD2
Yes, the part number is 30MD20.
No You would need to use the 30MD mech in the Saturn 30 series plate.
The 30MD is available in White (WE), Black (BK)*, Red (RD)*, Chrome Shadow (3S)* and Soft Grey (SG)*.
*Please check with our customer care team for availability as these colours are purchased to order.
The part number 30MD into 4031VH to 4036VH plates.
No, unfortunately we only do a double pole switch in a standard switch mechanism.
For further information please visit
No. We have 10A intermediate switch , 30MI (standard type) & 60PBI(for Saturn)
For more information on intermediate switched please visit the Clipsal web site on the link provided https://www.clipsal.com/Trade/search-results?q=30mi
Part codes which are available in 3S - 30M, 30USM, 30MI, 30MD, 30MBPR, 30M35, 32E450UDM, 32E450LM, 32E450TM
No - It is just a 2 pole switch
But a 30MD2 is a 2p 2way (6 terminals)
No, but you can use a 4031VH and a 30MD.
You can use the 30MI (PG 60 of Clipsal Pocketbook) in any of the 4030 Series Grid and Plates to suit 30 Series mechanisms (PG 17 of Clipsal Pocketbook)
Closest product would be a 10A Version - Such as a 2025RCD30
The part number for a 3 phase ,100amp , 30mA trip RCD unit is - A9R21491
The part number for the 1 Pole 10 Amps 6KA 30mA Type A RCBO is -A9D61810.
A C-Bus 30 mech is a switch which is compatible for C-Bus, yet fits into any 30 mech compatible grid plate (example: 2000 series)
The part name for a C-Bus 30 mech is 5031NMML, it is also available with IR control with the part name of 5031NMMIRL.
While this only provides a single button solution, these 2 mechs can be used with up to 3 C-Bus slave 30M, allowing us to create up to a 4 gang plate (1 master mech and 3 slave mechs)
The part name for the slave mech is 5031NMS
The part number for a square d 1 pole 20a rcbo 30ma plug in.The part numbers is QO120B10RCBO
Please got to link attached for mor information.https://www.schneider-electric.com.au
The part number for RCD, Type B , 63A, 30mA is 16756
residual current circuit breaker ID - 4 poles - 63 A - class B 30 mA
For more information see; https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=16756
IDPN N VIGI 20A C 30MA A-TYPE RESIDUAL C
Yes, the part number is 30M is a -3A.
Please see attached document for the charcateristics of the new RCBos and below table shows the replacemnet part#s
||QOE RCBO 1P+N 10A B 30mA 10kA
||QOE RCBO 1P+N 16A B 30mA 10kA
||QOE RCBO 1P+N 20A B 30mA 10kA
||QOE RCBO 1P+N 32A B 30mA 10kA
||QOE RCBO 1P+N 40A B 30mA 10kA
The part number for the adaptor plate for mounting a ZB4 unit into a 30mm hole is ZB4BZ012.
There is no white cover plate available for the PDL 695RCD30.
No, however we have a sensor mechanism to suit the PDL range. the part number is 100MPIR.
Are there 30mm light modules for 480V with LED lights?
30mm Operators - GIC Product
There are several light modules available:
9001KM5LG - green
9001KM5LR - red
9001KM5LY - yellow
Do we offer a Keyed 30mm Emergency Stop Mushroom Head Push button
No. We don`t offer a key release mushroom button in any of the 30 mm lines. Only on the 22mm.