The 30MBP has been tested to 12000 cycles.
Yes the P30MBP is available in Red.
Yes, it is the part number is 30MBPN12.
The closest alternative to a 30MBP momentary bell press mechanism is a 30PBBP.
The older unit was 15A compared to the new version at 16A. The 30PBBP has a square body but mechanically they are the same operation
Both Colours are not available for that Part.
Any Saturn plate that accommodates 30 series mechs will be suitable
eg 4031VH to 4036VH
Yes the part numberfor a 30MBPR marked open is a 30MBPR-OPEN-WE.
Only available in white, not available in NZ.
2031VETR3 is three wire switch.
Additional switches, 30mbp or the 30pbbp, can be installed in parallel to activate the timer from more than one location.
Please go to the website via the following link www.clipsal.com/Trade/Products/ProductDetail
and check under the Documentation Tab for more information.
No, only a single pole bell press switch is available
Part name is either 30MBP, 30PBBP or 60PBBP for Saturn plates
Unmarked 30MBPR would need to be done as a special/custom product. It is not available as off the shelf, stocked item.
Part codes which are available in 3S - 30M, 30USM, 30MI, 30MD, 30MBPR, 30M35, 32E450UDM, 32E450LM, 32E450TM
No unfortunately if you want the rocker that is the only option.
Any 240V momentary switch, such as a 30MBP Bell Press Switch can be wired to either of the two new mounting bases 755RB or 755RFB up to 20m away. A relay can also be pulsed on momentarily via a security or home automation panel to activate the test/hush function.
Yes, the 30MBPR is available in black (BK) - 30MBPR-BK
See link for details:
An extra switch can be wired to a majority of roller doors. However, you will need to contact your roller door manufacturer and request your roller doors specifications as the specifications may vary between products. If you fail to do so we will be unable to provide the correct part as we are unsure of the specifications such as current, voltages, wave type (AC or DC).
For more information on our product range please visit https://www.clipsal.com/Trade
No it isn't but the 30PBBP is
The alternative part for the Clipsal 30M20 is the 30USM: Universal Rocker Switch, 1-Way/2-Way, 250VAC, 20A.
The shroud to suit the 30PB is the 90FS-BK.
Yes the part number is RCD240/30.
No. unfortunately, part number 30PBI is not available in Black.
Use a LV438575 - NSX100N 30Amp 1P 50kA breaker
The 30PB is available in both black and white.
30PBI is not available with an LED
The Saturn Zen 2 gang plate accommoddates 30m35 mech is Z4032VH.
No. Unfortunately, part number 30M35 CANNOT be used in 2031V66.
No - It is just a 2 pole switch
But a 30MD2 is a 2p 2way (6 terminals)
No, but you can use a 4031VH and a 30MD.
30PBI is the 30 series intermediate mechanism. This does not have an LED indicator.
The replacement for a Merlin Gerin 26860, RCBO, 240V, 20A, 30mA is a A9D11820.
No it does not.
30PBI - Push-button Impress Series, No LED Indication, 250V 10AX - Intermediate Push-button.
No, the 30PBI is not available in Black as a standard item. However, it can be created as MTO ( made to order ) custom special.
The replacement part number for MRCD20-30, 2 pole, 20A, 250V, 30mA, IP66 RCD is 56RC
is also 2 pole, 20A, 250V, 30mA, IP66 RCD.
For further information, please visit
The 30M-D/WASHER is available in white only, a 30M-BK will need to be engraved
The 30M35 does not come in dark grey.
However it does come in Chrome Shadow or Soft Grey.
For further information please visit https://www.clipsal.com/Trade
Part codes you need to use SC2032VH + 30PBL + 38TB
Use a 4032VH + 38TB + 30PBL - not one touch but closest match
The part number is 16924.
No. We have 30M35 which is 1 pole, 35A mech.
Unfortunately not, 30PB or 30PBL are switch mechanisms which can be used for ON/OFF. They cannot be used for dimming lights.
is 30 series Standard Range universal push button dimmer mechanism, 250V 350W, that can be used for On / Off and dimming the lights. These are designed for
one-way operation only.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=31E2PUDM
The parts you need is 60PBL if the 406* plates are used and a 30PBL if the 403* plates are used
No colour choice for the LED indicators on 30PBL. The indicators are blue in colour on the 30PBL.