The 30M Series products have fluorescent capacity of approximately 5A
Both the 30MD and 30MI are not recommended for switching of multiple fluorescent fittings.
For further information please visit https://www.clipsal.com/Trade
Yes, the part number is 30M is a -3A.
No, however we have a sensor mechanism to suit the PDL range. the part number is 100MPIR.
The part code is 5031NMML
No. Unfortunately this would need to be done as a special and be quoted up by the quotes team.
Unfortunately, this part is unavailable. we only offer a 10A version. The part number for the 10A version is 30HM.
The part number for a 30M in Arctic Silver is 30M-3A.
Some of the key features are:
- Terminal bores of 4.1 mm diameter accommodate 4 x 1.5 sq mm or 3 x 2.5 sq mm cable
- Body fits 22 mm diameter hole
- Motor rating is 100
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=30M
Yes, it is a 30M mech and can be two way wired
The part number is 30USM-RD.
No. Unfortunately, the part number 780K1 can only be used with standard 30M mechs.
RF Range (line of sight) will be: 100m free air, 30m indoors
No unfortunately this part is unavailable.
The part number is P30Z .I
t takes any 30 series mechs.
Please click this link for more information
- Mounting accessories
- Switch mechanisms
- Prestige panel
- Suitable for mounting standard Clipsal 30 series mechanisms to the Prestige P2000 collection
- Dimensions: 38 mm Length x 38 mm Width x 18 mm Depth
Yes, we do have a 2 gang version of the 30T architrave switch. The part number is 32TA.
A C-Bus 30 mech is a switch which is compatible for C-Bus, yet fits into any 30 mech compatible grid plate (example: 2000 series)
The part name for a C-Bus 30 mech is 5031NMML, it is also available with IR control with the part name of 5031NMMIRL.
While this only provides a single button solution, these 2 mechs can be used with up to 3 C-Bus slave 30M, allowing us to create up to a 4 gang plate (1 master mech and 3 slave mechs)
The part name for the slave mech is 5031NMS
Use VDIR534830 for the 300m drum
To be able to use standard saturn switches with C-Bus, you will require to use the C-Bus 30 Mech switches.
This combined with the 5031NMSPACER will fill the gap, allowing the button press to actuate the C-Bus switch behind it.
There are 36 boxes (Rolls) of 305M Cable per pallet.
Issue: Part numbers
Product Line: BMH
The part number for the power cable for a BMH1003 xxxxxx motor is VW3 M5101 Rxxx . where xxx = 15, 30, 50, 100, 150, 200, 250, 500, 750 for cable lengths 1.5m, 3m, 5m, 10m, 15m, 20m 25m 50m and 75 m respectively, The composition of this cable is [(4 x 1.5 mm^2) + (2 x 1 mm^2)] and comes with a pre-made M23 style industrial connector on the motor end and free ends on the drive side.
The part number for the feedback cable for a BMH1003 xxxxxx motor is VW3 M8102 Rxxx where xxx = 15, 30, 50, 100, 150, 200, 250, 500, 750 for cable lengths 1.5m, 3m, 5m, 10m, 15m, 20m 25m 50m and 75 m respectively, The composition of this cable is [(3 x 2 x 0.14 mm^2) + (2 x 0.34 mm^2)] and comes with a pre-made M23 style industrial connector on the motor end and an RJ45 style connector on the drive side.
Part numbers are P2031VH (single) P2032VH (double) P30M (Mech)
No.Unfortunately we donot do it.
Part code is 30P for the blanking module
Standard Active Silver Caps are not able to be purchased on their own. The only caps available for the range is the labelled cap pack which also comes with 10x blank Cat's Eye Caps. The part number for the Cap pack is 60PBC-3A.
Yes the 30N24 is suitable for AC and DC loads
No. We have 10A intermediate switch , 30MI (standard type) & 60PBI(for Saturn)
For more information on intermediate switched please visit the Clipsal web site on the link provided https://www.clipsal.com/Trade/search-results?q=30mi
We speak about 30h of battery working time (autonomy) by continuous working.
The 3105RG6Q3B RG6 quad shield coax 305m cable is FOXTEL and Austar approved.
The Foxtel approval number is F10129 and the Austar approval number is P07982.
Yes the part number is 30MD2
Yes, the part number is 30MD20.
No, this series is not spring return
No unfortunately this part is not available.
Unfortunately this does not do 2 way dimming.
We do not have a push button dimmer in our range which does at this time.
If you want 2 way dimming, you need to use a 32e450udm and a 30m series mechanism which will only give you a dimmer on one side of your 2 way switching.
Please go to the website via the following link www.clipsal.com/Trade/Products/ProductDetail and check under the Documentation Tab for more information.