switch 1g arch dp 10a 250v

Flush Switch, 1 Gang, 2 Pole, 250VAC, 10A, Architrave

Catalogue Number: 30D
switch 1g arch dp 10a 250v
Colour: White Electric
Colour: Per UOM Std.
  • White Electric 1 PCE
Added to cart


hide show
Range of product
Standard Series
Product brand
Device presentation
basic element with full cover plate and grid
Switch function
Number of rocker
Number of poles
Device mounting
Fixing mode
by screws
Local signalling
[Ue] rated operational voltage
250 V AC
Rated current
10 A
without marking
Sustainable offer status
Green Premium product
REACh Regulation
Reference contains Substances of Very High Concern above the threshold
EU RoHS Directive
Mercury free
RoHS exemption information
China RoHS Regulation
Product out of China RoHS scope. Substance declaration for your information
Environmental Disclosure
Circularity Profile

Frequently Asked Questions

hide show

Is there a intermediate version of the 306 pull cord switch?

No unfortunately this part is unavailable.

Do you have a 2 gang version of the 30T architrave switch?

Yes, we do have a 2 gang version of the 30T architrave switch. The part number is 32TA.

what color of 30MD will suit 4031VH plate?

use 30MD-3A

Is the PDL 30A switched

 No it is not

What is the blanking module for the Clipsal range

Part code is 30P for the blanking module

Is the Clipsal 30N 24v DC

Yes the 30N24 is suitable for AC and DC loads

According to data sheet of remote device, "Autonomy" is 16h. What is "Autonomy"?

We speak about 30h of battery working time (autonomy) by continuous working.

Is there a 30MD with double throw?

Yes the part number is 30MD2

Is there a 20A version of the 30MD double pole switch mechanism?

Yes, the part number is 30MD20.

What is the current rating of the 30M?

The 30M Series products have fluorescent capacity of approximately 5A.
Both the 30MD and 30MI are not recommended for switching of multiple fluorescent fittings.

For further information please visit https://www.clipsal.com/Trade

What is the wattage of the 30V lamp DL1BA030?

What is the wattage of the 30V lamp DL1BA030?

Product Line:
Harmony Tower Lights

All Products

Product Features


CTA-ID : 2017901

Is there a 24V version of the 30N neon mechanism?

Yes,  there is a 24V version of the 30N neon mechanism. The part number is a 30N24.
Some of the key features are:
  • 24V
  • Suitable for DC loads
  • Fits 30 Mechanism series plates
  • Multiple colours available
For further information please vist https://www.clipsal.com/Trade/Products/ProductDetail?catno=30N24


What Grade of Steel is used for Metalplate?

The BSL range uses Grade 304 Steel.

Is 30m series mech available in colour 3A?

Yes, the part number is 30M is a -3A.


What is the part number for cat 5 cable in 305 mtr roll?

The part number is 2D4P5IPV3B

Please click this link for more information

User-added image

What do I need to put together a single phase 30A 56 Series RCD

Use 56CB4 + A9R51240 40amp RCCB

Is there a Saturn 60 series double pole mech?

No You would need to use the 30MD mech in the Saturn 30 series plate.

SCP3xx Model 300 Processors Instruction Bulletin 30598-103-01

Attached is the SCP3xx Model 300 Processors Instruction Bulletin 30598-103-01.

Does Vijeo Designer Support the Rockwell Micrologix 850 controller?

No, Vijeo Designer does not support the Rockwell Micrologix 850 controller.

What colour is the Clipsal 30MD (250V 10A double pole - single throw) available in?

The 30MD is available in White (WE), Black (BK)*, Red (RD)*, Chrome Shadow (3S)* and Soft Grey (SG)*.

*Please check with our customer care team for availability as these colours are purchased to order.


Is the Indicator neon mechanism 30N24 DC compatible ?

Yes, the 30N series can be used on either AC or DC voltages.

What is part number for Neon indicator in white?

Part 30N is not available in White

The standard colours are Transparent,Green,Red,Blue & Amber.

Is there a 30M sensor?

No, however we have a sensor mechanism to suit the PDL range. the part number is 100MPIR.

Is 30M available marked SPA?

Yes, part number is available as standard 30MSPA

for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=30MSPA

What is the dimensions for a PDL DBF15

DBF15 D Board Flush 15 Way 1.7Kgs
Board size 376w x 258h x 100d
Hole size335w x 223h x 80d inc wallboard

What are the dimensions for a PDL DBF10?

Board Size - 286w x 258h x 100d
Hole Size - 246w x 223h x 80d inc wallboard


What is the Cutout size of the DBF45 Switchboard?

335w x 631h x 80d inc wallboard
This is different to the old DBF45 which stated 491mm High.

What is the part code for a CBUS 30M wall switch (master)

 The part code is 5031NMML

What is the part number for 30M for 3 way installation?

The part number for 30M for 3 way installation is 30MI.
Please click this link for further information

Does Clipsal manufacture a momentary ceiling switch?

Unfortunately not. We do not have momentary ceiling switch. We have latching ceiling switches, part numbers below
343-BR or 343-WE is 2 way 10A
342-BR or 342-WE is 1 way 10A

The 302 is no longer available

What version of Colour Touchscreen do i have?

You can confirm the version of the Colour Touchscreen you have by checking the pin configuration on the Colour Touchscreen's power supply

5000CTC V1 - 50xxCTC -  4 pin power supply - 5000CTCPS - 5VDC 30W 1.5A 90-264VAC 50/60Hz
5000CTC V2 - 50xxCTC2 - 7 pin power supply - 5000CTCPS/2 - 5VDC 30W 1.5A 90-264VAC 50/60Hz
5000CTC V3 - 50xxCTC3 - 2 pin power supply (green phoenix connectors) - 5100P24/2700AU - 24VDC 65W 2.7A 100-240VAC 50/60Hz

Is there a double pole mech of 10amp for the Saturn series?

The part number 30MD into 4031VH  to 4036VH plates.

Do you do a double pole push button in a 30 series mechanism? such as a 30MD

No, unfortunately we only do a double pole switch in a standard switch mechanism.

For further information please visit 

What is the impedance of the analog input AI1 on the ATV312?

Analog input one impedance of the ATV312

Product Line:

All models and serial numbers


The impedance of AI1 on the ATV312 is 30K ohms

Do you do a 56/32 with one spot for a 30 mech not two?

No unfortunately we dont make that part you would need to place a 30P to fill one of the holes.

What is part no for blank module to suit Saturn Zen

Unfortunately there is no blanking module available

for Saturn Zen can use 30P however colour likely to be different

Support on Buildings Management Systems and Pelco Security Solutions

 For support on Buildings Management Systems and Pelco Security Solutions please visit:  https://buildingskb.schneider-electric.com/

Explanation of circuit breakers in 30 amp rPDU's

Product Line
  • Rack Power Distribution
    • AP7XXX, AP7XXXB, AP8XXX series

  • All serial numbers

Circuit breakers are in place to protect the branch circuit and its conductors. With respect to a 30A breaker, all components employed in the circuit (downstream from the circuit breaker) shall be rated for 30A use. In a scenario where a 30A circuit breaker is providing power to a 20A rated outlet, the outlet, load plug, load cord and load are rated for 20A use, thus sized for this rating. In this scenario there is inadequate protection for the outlet and all connected equipment, and potentially (and most harmfully) the conductor that is supplying the outlets themselves.

In North America, Canada, and Europe, PDU's are evaluated under UL/CSA/EN/IEC 60950-1. This standard requires circuit breaker protection when the rating of an output is less than the rating of the input. A PDU with a 30A input plug and 20A receptacles must have circuit breakers. Section 2.7 of the 60950 standard states: "Protective devices necessary to comply with the requirements of 5.3* must be included as part of the equipment" 

*5.3 is the evaluation of abnormal operating and fault conditions.

In North America, the requirement is based on NFPA 70, the National Electrical Code. In general, in the United States, you can have any outlet rated less than 20A protected by a 20A breaker. However, these outlets must have protection rated no less than the outlet rating and no more than 20A. A 30A outlet must be protected by a 30A breaker and may not have anything larger or smaller.

Europe has very similar rules to North America. The main difference is the rating of receptacles and breakers. In Europe, you typically have 10A or 16A outlets protected by a 16A breaker, but the breaker rating can be no more than 16A.

Canada places additional restrictions. In Canada, a 15A outlet must be protected by a 15A breaker. The only exception is the "T-Slot" 20A outlet that accepts either 15A or 20A plugs. This outlet may be protected at 20A.

If a PDU has a 30A plug and 30A receptacles, it will not require and internal circuit breaker. The 30A plug forces it to be plugged into a 30A branch circuit, which will have its own 30A breaker. The PDU can then rely on the branch circuit's breaker rather than an internal breaker.

If a PDU has a 30A plug and 20A receptacles, it must have internal 20A branch rated breakers for the receptacles. The 30A protection of the branch circuit is too high to be safe for the 20A outlets.

How many Amps are the standard 30 mechanisms rated to?

A standard 30M mechanism is rated at 10 Amps.
Some key features are:
  • Terminal bores of 4.1 mm diameter accommodate 4 x 1.5 sq mm or 3 x 2.5 sq mm cable
  • Body fits 22 mm diameter hole
  • Motor rating is 100
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30M


End of Support Announcement for WallBotz 300, 300B and RackBotz 300 and 303


End of Support Announcement for WallBotz 300, 300B and RackBotz 300 and 303

Product Line:



NetBotz version 1 WallBotz 300, 300B and RackBotz 300 and 303

End of Life, End of Support


End of Support Announcement for WallBotz 300, 300B and RackBotz 300 and 303

The following NetBotz products will reach the end of their support life on January 31, 2005:
WallBotz 300B
WallBotz 300
RackBotz 303
RackBotz 300

After that date, NetBotz may not take support calls or E-mails regarding these products. NetBotz also may not issue any further software releases or patches for these products after that date. 

Please note that the Rack and wall versions of the 310 and 400 units are also end of support

What is the part number for the standard 30M rocker mech with the red indicator mark on the top ?

30MRD-WE (White)

What is the part number for cat 6A shielded cable?

The part number for the shielded 4 pair FUTP CAT6A LAN cable, LSZH, 305 metre reel is 2D4P6ALSF3R-BU.

How much power does the led switch use?

We do not have specific data on our led and neons.
A generic led or neon of a simillar size would be approximatley 0.138 Watts.


Are the clips on part no TPWPLED1 marine grade steel

The clips for part no TPWPLED1 are not marine grade steel

they are rated at 304 grade

What is the part number for 30M with red dot on the dolly?

The part number is 30MRD-WE.
Please click this link for further information
User-added image

What is the part number for Prestige 30M with neon?

The part number is P30NM

Please click this link for further information https://www.clipsal.com/Trade/Products/ProductDetail?catno=P30NM

User-added image

Do you have a 20A mechanism marked heat in a 30M style mechanism?

No. Unfortunately this would need to be done as a special and be quoted up by the quotes team.

Is there a 30M labelled heat in 16A?

Unfortunately, this part is unavailable. we only offer a 10A version. The part number for the 10A version is 30HM.


What is the dimensions for a PDL DBF30 and DBS30?

Board Size - 376w x 392h x 100d   Hole Size - 335w x 357h x 80d inc wallboard

Board Size - 376w x 392h x 115d   Hole Size - N/A.

What are the dimensions for the new PDL DBF45 and DBS45?

Board Size - 376w x 666h x 100d   Hole Size - 335w x 631h x 80d inc wallboard

Board Size
- 376w x 666h x 115d   Hole Size - N/A

Show More