Clipsal Iconic Switch Plate Skin 1 Gang, Vertical Mount, Clip-On

Clipsal Iconic Switch Plate Skin, 1 Gang, Architrave, Vertical Mount, Clip-On

Clipsal Iconic Switch Plate Skin 1 Gang, Vertical Mount, Clip-On

Item Number: 3041AC-VW

Retail
$9.82
RRP (Inc. GST)

A sleek design ensures the Clipsal Iconic Architrave Switch Plate Skin is adaptable for residential usage. The cover fits in tight spaces and is flush-mounted vertically using clip-on fixing for simple installation.

Colour Vivid White (VW)
  • Vivid White 1 PCE
  • Anthracite 1 PCE
  • Cool Grey 1 PCE
  • Warm Grey 1 PCE

Product Dimensions

Width icon

Width38 mm

Height icon

Height120 mm

Depth icon

Depth9 mm

See full specifications

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-
Clipsal Iconic 3025 exploded view
3043G Rear Perspective

Specifications

Design

Range

Clipsal Iconic

Aesthetic name

Iconic

Product or component type

cover frame

Product destination

switch

Surface treatment

untreated

Physical

Type of packing

polybag

Quantity per set

set of 20

Range compatibility

switch

Device mounting

flush

Number of rocker

1

Fixing mode

clip-on

Height

120 mm

Width

38 mm

Depth

9 mm

Net weight

0.02 kg

Ambient air temperature for operation

0-45 °C

Relative humidity

10-95 %

EU RoHS Directive

Under investigation

Environmental Disclosure

ENVPEP120506EN

Material

Material

  • PC (polycarbonate): skin
  • ABS (acrylonitrile butadiene-styrene): skin
    • Others

      Unit Type of Package 1

      PCE

      Number of Units in Package 1

      1

      Package 1 Weight

      13 g

      Package 1 Height

      7 mm

      Package 1 width

      114 mm

      Package 1 Length

      39 mm

      Unit Type of Package 2

      BB1

      Number of Units in Package 2

      20

      Package 2 Weight

      386.4 g

      Package 2 Height

      328 mm

      Package 2 width

      106 mm

      Package 2 Length

      146 mm

      Unit Type of Package 3

      CAR

      Number of Units in Package 3

      240

      Package 3 Weight

      3120 g

      Package 3 Height

      335 mm

      Package 3 width

      261 mm

      Package 3 Length

      335 mm
      Show all specifications

      Frequently Asked Questions

      hide show

      Is Iconic intermediate mechanism available assembled on a switch plate?

      Unfortunately, the Iconic intermediate mechanism is not available assembled on a plate. It can put together using below part numbers;
      40MIL  - Clipsal Iconic Intermediate Switch Mechanism, 250V, 10A, LED.
      +
      3041G - Clipsal Iconic - Switch-Grid, Vertical/Horizontal Mount, 1 Gang
      +
      3041C - Clipsal Iconic - Skin Switch Plate Cover, Vertical/Horizontal Mount, 1 Gang
      For further information, please visit the below links:
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=40MIL
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=3041G
      https://www.clipsal.com/Trade/search-results?q=3041C


      What are the causes of an USF fault on ATV61 drives?

      Issue:
      What are the causes of an USF fault on ATV61 drives?

      Product line:
      ATV61, ATV71, Altivar 61, Altuvar 71

      Environment:
      All models

      Cause:
      Undervoltage supply.

      Resolution:
      The USF fault occurs when the DC bus voltage level drops below the threshold set in 1.8 Fault Management > Undervoltage Management > Undervoltage level. 

      For N4, 480V drives at factory setting of 480VAC, the threshold is 430VDC on the DC bus or 304VAC on the line terminals. 
      For M3, 240V drives at factory setting of 260VAC, the threshold is 230VDC on the DC bus or 163VAC on the line terminals.
      For Y, 575V drives at factory setting of 690VAC, the threshold is 571VAC on the DC bus, or 404VAC on the line terminals.

      Recommendations:
      - Measure the the incoming line to line voltages
      - Compare the line voltage to the Mains Voltage as shown under Menu 1.2 Monitoring, and also the measurement of the DC bus voltage.
      - If the standard line voltage is low, you can adjust the Mains voltage setting.
      - Adjust the Undervoltage time out to compensate for line contactors, or add time delay before a fault would occur. 
       

      What can cause an USF (undervoltage fault) on an ATV12 drive?

      Issue: 
      What can cause an USF (undervoltage fault) on an ATV12 drive?

      Product Line:
      Altivar 12

      Environment:
      All

      Cause:
      Fault condition

      Resolution:
      For N4, 480V drives at factory setting of 480VAC, the threshold is 430VDC on the DC bus or 304VAC on the line terminals. 
      For M3, 240V drives at factory setting of 260VAC, the threshold is 230VDC on the DC bus or 163VAC on the line terminals.

      Recommendations:
      - Measure the the incoming line to line voltages
      - Compare the line voltage to the Mains Voltage as shown under monitoring MON.
      - If the standard line voltage is low, you can adjust the Mains voltage setting
      - Adjust the Undervoltage time out to compensate for line contactors, or add time delay before a fault would occur. 
      - Check to issues where line potential is dropping due to supply issues that may be caused by load pulling too much current.

      What is the part number for the 1 gang Iconic switch , and can the mech be rotated for horizontal or vertical switch plates?

      The part number for the 1 gang Iconic switch , and can the mech be rotated for horizontal or vertical switch plates - 3041VA and yes can be mounted Vertical or Horizontal..
      For further information , visit link below:-
      https://www.clipsal.com/Trade/search-results?q=3041VA
      User-added image

      Does Lexium32M limit the maximum voltage applied to a 3rd party motor winding?

      No, when using a 3rd party motor with Lexium32M it is the user's responsibility to operate the Lexium 32 drive from a mains voltage within the range of the 3rd party motor being used.

      For example, if a 3rd party motor connected to the Lexium32 drive has a ,maximum voltage rating of 300vac then the mains voltage applied to the Lexium32 should not be higher then 300vac. 
      By comparison, if the Lexium32 drive was connected to 480vac this would exceed the motor manufacturers design specifications for insulation within the winding, connectors, terminal....ect. and would not be recommended and could result in motor failure and or a hazardous situation due to insulation rating of the motor.

      rev 7.19.17
       

      What is an USF fault on the ATV312 drives?

      Issue:
      What is an USF fault on the ATV312 drives?

      Product Line:
      Altivar ATV31 and ATV312

      Environment:
      All

      Cause:
      Drive is tripping on USF or undervoltage fault.

      Resolution:
      USF means undervoltage fault.
      Get a digital meter and check your input line voltages on L1 L2 L3
      ATV312........M2 drive will trip on USF if the line voltage is 160VAC or less
      ATV312........M3 drive will trip on USF if the line voltage is 160VAC or less
      ATV312........N4 drive will trip on USF if the line voltage is 300VAC or less
      ATV312........S6 drive will trip on USF if the line voltage is 430VAC or less

      What is the part number for Iconic foxtel TV outlet?

      The part numbers for Iconic Foxtel TV outlet are 3041G + 3041C-** + 40PFM-TN

      3041G Clipsal Iconic - Switch-Grid, Vertical/Horizontal Mount, 1 Gang

      3041C-WY Clipsal Iconic - Skin Switch Plate Cover, Vertical/Horizontal Mount, 1 Gang

      Clipsal Iconic - TV Antenna Socket, 75 Ohm, F-Type

      For further information see:https://www.clipsal.com/Trade/Products/ProductDetail?catno=3041G:https://www.clipsal.com/Trade/Products/ProductDetail?catno=3041C-WYhttps://www.clipsal.com/Trade/search-results?q=40PFM
       

      What part numbers are needed to put together an Iconic 1 gang electronic Pushbutton switch plate (Vivid white)?

      Below are the part numbers needed to put together an Iconic 1 gang electronic Pushbutton switch plate :

      3041G - Clipsal Iconic - Switch Grid, Vertical/Horizontal Mount, 1 Gang
      For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=3041G

      +

      3041C-VW -Clipsal Iconic - Skin Switch Plate Cover, Vertical/Horizontal Mount, 1 Gang, Vivid White
      For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=3041C-VW​

      +
      41E350PBES2SM-VW -Clipsal Iconic - Electronic Switch Mechanism, Push Button with ControlLink (without bluetooth) 2-wire, 350W
      For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=41E350PBES2SM

      Range

      The Clipsal Iconic range is founded on a specialised electrically safe grid plate.
      Once installed by an electrician, it’s safe for anyone to change the skins at any time by simply clipping off the standard skins and snapping on a new design.

      Iconic’s interchangeable standard, Styl and Essence skins provide clever options tailored to suit a homes’ decor or family’s lifestyle.