3000SM-VW 1 Gang Shallow  Mounting Block

1 Gang ShAllow Iconic Mounting Block

Catalogue Number: 3000SM
3000SM-VW 1 Gang Shallow  Mounting Block
Colour: Vivid White
Colour: Per UOM Std.
  • Vivid White 1 PCE

Specifications

hide show
Range
Clipsal Iconic
Product brand
Clipsal
Product or component type
mounting box
Shape
rectangular
Number of gangs
1 gang
Material
plastic
Length
140 mm
Width
91 mm
Depth
32 mm
EU RoHS Directive
Under investigation

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • CAD Files and Packs

  • Technical Data Catalogues

  • Installation Instruction

  • Product Environmental

  • Specifications

  • Case Studies

  • Certificates (MSDS)

Frequently Asked Questions

hide show

Does PowerLogic SCADA support waveform data of ION meters?

No, Powerlogic SCADA (PLS) currently does not support the waveform data from ION meters; valid through PLS v7.10 SR3.
Waveforms from the following devices are currently supported as of v7.10 SR3: Circuit Monitor 3000s, Circuit Monitor 4000s, Power Meter 800s, and Sepam 20s, 40s, and 80s.


Legacy KB System (APS) Data: RESL200266 V2.0, Originally authored by KBAdPM on 10/16/2009, Last Edited by MaTh on 12/01/2010
Related ranges: PowerLogic SCADA 7.1

Would a 755SMA be able to replace a 3000SSA directly?

No, the two have different bases.

What is the part number for standard din rail?

The part number for standard din rail is NSYSDR200B. It is 7.5mm deep by 2000mm long.

Do you have a 45RU data cabinet 800mm Wide X 1000mm Deep?

Yes, the part number is 3106N45C810-BK.

What is the part number for a 45RU data cabinet , 800mm wide and 1000mm deep?

The part number for a 45Ru data cabinet that has dimensions of W800m x D1000mm is - 3106N45C810

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=3106N45C810

What is the Pin out detail for the Modbus programming cable 110 XCA 20 3000?

The pin out details of the Modbus programming cable 110 XCA 20300 is as shown in the attached.

 

What is the altitude derating for a TeSys D-Line contactor?

Issue:​
What is the altitude derating for a TeSys D-Line contactor?

Product Line:
Digest 177 Section 18 : Contactors and Starters, IEC

Environment:
North American Products

Resolution:
The contactors are fully rated up to 3000 meters. Following are derating multipliers for altitudes above 3000 meters for both voltage and current:

Voltage
3500m x 0.90
4000m x 0.80
4500m x 0.70
5000m x 0.60

Current
3500m x 0.92
4000m x 0.90
4500m x 0.88
5000m x 0.86

For example, an LC1D80 at 5000 meters:
- The maximum rated operational voltage is 1,000V (IEC947-4) and 690V (UL/CSA). At 5000 meters it becomes 1000V x 0.6 = 600V (IEC947-4) and 690V x 0.6 = 414V (UL/CSA).
- The maximum rated operational AC3 current is 80A. At 5000 meters it becomes 80A x 0.86 = 68A.



 

What is the MTBF (Mean Time Between Failure) for Lexium 32?

The MTBF (Mean Time Between Failure) for the Lexium 32 product range equals 300000 hours.

Will the 30RSM mechanism fit into a Saturn plate?

No, unfortunately this mechanism does'nt fit the Saturn series. However, this mechanism will fit into the coms Saturn series comunication plate 4031VH.

Is the 600SM available in red

No, it only comes with White and Black covers.

What parts are required to make a Saturn permanent connection unit (PCU)?

4032VH + 30USM + 38TB

What is the effect of altitude on ATV312?

Product Line:
All ATV312 and ATV31

Environment:
High altitude, more than 1000m

Cause:
What is the effect of the high altitude on the drive.

Resolution:
For all ATV312, less than 1000m, no derating.
For single-phase supplie and corner grounded distribution networks, up to 2000m, derateing 1% per 100m.
For three-phase supplies, up to 3000m, derating 1% per 100m.




 

Is part number 30USM Double pole?

No, part number 30USM is not a double pole.

For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=30USM


User-added image

PDL600SM - 600SM can it protect downstream or will it only protect the socket in that plate?

The 600SM protects all other devices on the circuit but it can only handle a limited number of surges.
For more information see attched installation sheet.

What is the part number for our 300mm ex-fan?

The part number for Clipsal 300mm ex-fan is - 6230-0

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=6230-0
User-added image

What is the part number for a 300mm ceiling exhaust fan?

The part number for a 300mm ceiling exhaust fan is - 6230-0

For further information, visit the link below:-
https://www.clipsal.com/Trade/search-results?q=6230-0
User-added image

Can you change the amount of diagnostic registers in the Profibus 140CRP81100 module when using Momentum I/O and Concept?

Goals and Symptoms

To go over the diagnostics for configuring the amount of diagnostic registers.

Causes and Fixes

Once you go and import the .cnf file for the exported Sycon file into the Concept program, the default diagnostic length is 6. If you want more diagnostic registers for this you will do the following.


Changed from 6 to 13. The reference number will now go from 300020 to 300032.


Note: Concept and the CRP811 are obsolete and Unity Pro is the replacement with the M580.

ION6200 unresponsive immediately after a power up

Issue: 
ION6200 meter becomes unresponsive. The user may notice that pressing the buttons on the ION6200 does nothing.

Product Line:
ION6200 Series Meter

Environment:
Power Metering

Cause:
The RS-485 bus may momentarily become unusable as the 6200 powers up on a rs-485 network.    This is due to hardware being in an un-initialized state until the code runs.

The RS-485 transceiver starts in transmit more and last for about 300ms.    

Resolution:
Allow 10 seconds to pass before trying to use the meter after the meter is powered on. 
 
 

What surge protection can I use behind a powerpoint in the 600 series

 Use a PDL 600SM with a 600 series socket with an extra switch

PDL600SM SURGE PROTECTION MODULE Do we have in Black?

When you purchase a 600SM it comes with a White and Black cover and you can put on either one.

What needs to be done to use Blokset at high altitudes (2000m, 3000m, etc.)?

We have to apply the derating value informed on the Technical guide 7040x0 item 3.1 ¨Derating Factor for the Voltage" to the Tension ( ex0,88=3000m ) . It means that all values of voltage will be derated as Ui , Uimp etc. Also to the current using the "¨Derating Factor for the Circuit Breaker"( ex 0,99=3000m), this value must be applied also on the current of the circuit Breakers informed on Technical guide.

    • FAQ15.pdf

What is the part number for a mounting block that can be mounted on a circular 300mm pole?

The part number for a mounting block that can be mounted on a circular 300mm pole is - 2000MF300
For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=2000MF300

User-added image

Is there a "Draftstoppa" to suit the 6500A?

No. Our Draftstoppa only suits round exhaust fans up to 300mm diameter.

What is the part number for strip cable 300MM X 15MTR?

The part number will be 287R300HD15-EO.
For more information please follow the below link:
https://www.clipsal.com/Trade/Products/ProductDetail?CatNo=287R300HD15

 

How many events does the onboard event log hold?

The event record will hold 30000 events before the log begins to FIFO the events.

Can a data or AV outlet be added on the plate with 800 series integrally switched sockets

No. The joint Australia/New Zealand Wiring Rules (AS/NZS 3000) require that all faceplates comply with AS/NZS 3112, clause 3.2 of which prohibits mixing of these voltage levels on the same faceplate

Can I get a 30USM with a red dot on the dolly?

Yes, you can get a 30USM with a red dot. The part number is 30USMRD.

Some of the key features are:
  • Reduced visible arcing and crackling
  • Modular 30 mech design suits most Clipsal switch plates
  • With Red Dolly dot
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30USMRD


 

How do I scale data from 0-32,000 to 0-4095 using 984 Ladder Logic?

 

The following network scales data from 0-32,000 to 0-4095 for use with analog signals.





 
Register 300001 contains the analog input data (0-32,000).

This data gets BLKM (Block Moved) to register 400002. 

Registers 400001 and 400002 are the top integer nodes of an EMTH (Divide Integer by Floating point) which is divided by registers 400003 and 400004 (display 400003 as data type float), the middle node registers that contain the floating point constant (7.814408).  

The floating point result is found in registers 400005 and 400006 that is then converted by the FTOI
(Floating point TO Integer) Block to register 400007.

What are the features for the 4RC440SI30?

Some of the key features are:
  • Unique new white finish for a fresh modern look
  • Base module = 18 mm wide, compact standardised and consistent module dimensions
  • Lift-up terminals. Safer ‘no hot spot’ terminations and all cable strands are locked in
  • Cable automatically guided to the correct position: terminals with guard
  • Fast closure
  • The presence of the green strip guarantees physical opening of the contacts and allows operations to be performed on the downstream circuit in complete safety
  • Same housing as AC type MCBs. Uniformity in space requirements and installation
  • Superior, safe and reliable DC breaking per pole
  • Used with marine, telecommunications, solar power, emergency power, battery power
  • Excellent breaking capability for its compact size
  • Super immune type
  • 75 mm modular spacing
  • Operating temperature: -5 to 40 deg C
  • Degree of pollution is 2
  • Rated Impulse withstand voltage is 6 kV
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4RC440SI30
 

 

How can you decode a Masterpact catalog number to determine construction?

Issue:
How can you decode a Masterpact NW or Masterpact NT catalog number to determine construction features such as ratings, accessories, trip unit, connectors, etc.?

Product Line:
Circuit Breakers

Environment:
Masterpact NW

Cause:
Catalog numbers are intelligent but coded

Resolution:
To decode a catalog number, access the attached file and find the description corresponding to each character for the breaker catalog number and for the cradle if applicable.
PLS007 is for Masterpact Circuit Breakers.
PLS012 is for Masterpact Cradles.

Note: For Masterpact breakers (eg. WA8AHR31A2SNNNNNNN9N) from late 1990s to very early 2000s, check attached 1999 decoder.

Can the 30USM be used for Fluro loads?

Yes , it is rated to 16AX for fluro based loads.

Is a 30USM-WE a normal switch rocker mechanism

30USM-WE = Universal switch mechanism 20/16AX - compared to the 10A only 30M-WE
(see attached 30USM Brochure)

What is the size of the terminal screws in the Clipsal 30USM mech?

Screw B.S M3.5 X 0.6, 5.6mm CH HD IN

 

Is a 16amp mech available marked 'Heat'?

Part number replaced with 30USM mech but marked 'Heat' is not standard.
 

Is there a way to block off my 300mm exhaust fan when not in use?

Yes, you can use a Draftstoppa. The part number is CEDS1.

Some of the key features are:
  • Draftstoppa prevents heating / cooling escaping through all non-operating domestic ceiling exhausts up to 300 mm.

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=CEDS1.
 

How many copper FIPIO or FIPWAY network segments can be joined into one copper FIP network and what is the total length possible?

Up to 5 copper FIPIO or FIPWAY network segments can be joined using either TSXFPACC6 (electrical) or TSXFPACC8 (optical) repeaters to get a total length of 5000m of copper cabling. Each individual segment is limited to 1000 meters in length. This figure includes all trunk cabling and all drop cabling.

I am looking for a wall fan with a 240mm cutout and is physically approx 300mm square

You can use a Clipsal 7106A or 7108A both have a 230mm cut out and are 271mm square

Can I change the input power plug on my 120Vac Smart-UPS?

Issue:
Changing input plugs on Smart-UPS 2000VA or larger

Product Line:
Smart-UPS 

Environment:
Smart-UPS 2000VA or larger

Cause:
All Smart-UPS 2000VA or larger have an input plug that is not a standard 5-15 household style plug.

Resolution:
The higher capacity of these UPS models require an input plug that is either 20amp or 30 amp (depending on model) rather than the traditional 15 amp household plug you may be more familiar with. The UL listing of the UPS assumes that the UPS is using the input plug for which it was designed. Modifying the input plug may affect the UL or other regulatory compliance. Schneider Electric does not recommend modifying the input plug of your Smart-UPS UPS or attached Smart-UPS Accesories (IE: Stepdown Transformers, PDU strips, ETC) 

Note: If you decide to go against this recommendation and change the input plug of your UPS, please be aware that the functional capacity of the UPS will be limited by the input circuit.
(I E: An SMT3000 being supplied 15 amps is effectively a 1500VA UPS rather than the 3000VA that it is rated for.)

Are light fittings attachable on the Caloundra Sweep fans?

You cannot fit a light to the non-light versions of Caloundra range. The only fan that has a light is the C4HS1300L-WE and this light is integrated into the fan, it is not a kit.
This is a 4000K natural white LED. However, if customers prefer a warmer colour temperature, we also sell a 3000K warm white LED array separately (LEDFANKIT-WW).
 

Is there a Surge Protection Socket Outlet available in the 600 series?

PDL used to do a complete unit - The 695SP however, this is now obsolete. A Surge Protection Outlet can be made up of parts. You will need to use one of the sockets that have an extra switch space such as the 694X or the 695X and replace the extra switch with our Surge Protection Module, the 600SM.

 

How many dimmers can I fit in to a BSL plate.

You can put a maximum of 3 dimmers in a grid plate.  You will need to order BSL36VH + 3 x 30USM + 3 x whichever dimmer is appropriate for your lighting

Does the WS229 come with push button mech?

The WS229 comes with a 30USM as standard.
A push button mech will need to be incorporated into a WS229VH.


 

Does Clipsal have a single gang, IP rated, switch plate with a 15 or 20 amp mechanism?

We do not but you can put a 30USM into a 31VHWP-WE to achieve the same thing.

Does Clipsal have a single gang, IP rated, switch plate with a 15 or 20 amp mechanism?

We do not but you can put a 30USM into a 31VHWP-WE to achieve the same thing.

How do I Monitor Analog Input Over-Under Range conditions on a SCADAPack 350?

Only the Scadapack models 314, 334 and 357 (only AI on the 5606 Lower IO board) have register assignments that monitor the out-of-range status for analog inputs.

The only way to monitor if an analog input has failed, would be to monitor the raw input and look for a zero or full scale value.

For a SP350 using a 5V/20mA register assignment and a 4-20mA input:
The screnshot below shows logic that scales the raw value of input 30001 to produce a scaled value in register 40110 (in mA)

With the 5V/20mA register assignment, a count of 32767 will appear when seeing a full scale value or an out of range value. In either scenario, the mA reading will never go above 20mA which is why the threshold has been set to 19.99mA.

For a SP350 using a 10V/40mA register assignment and a 4-20mA input:

The screnshot below shows logic that scales the raw value of input 30001 to produce a scaled value in register 40110 (in mA)

With the 10V/40mA register assignment, register 30001 can now measure beyond 20mA so it is now possible to tell a full scale value apart from an out of range value. Full scale 20mA now corresponds to a raw input value of 16384. The logic is looking for an out of range condition when it sees 20.01mA or greater.

ETSNZ How many charging records can the EVLink webserver hold?

You are able to view the last 30CDR (Charge Detail Record) regardless of the date. It will also store the last 31 days of load. It will write of the last record when it is full.
The export button in the Charge Data Record tab is used to export all the charging sessions (up to 3000) in the station via a .csv file.

 

What is the part name for a draft stopper to put above ceiling exhaust fans?

The following part number will suit CEDS1. 
It will fit over fans of up to 300MM diameter

What is the M rating of the WSF226 switch?

M80 is the correct rating for the WSF226.

It used to be M100 but the mechs were changed to 30USM which changed the M rating also.

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=WSF226

 

What is the part number for an exhaust fan about 300mm cutout?

The part number for an exhaust fan about 330mm cutout is 6230-0.
Some of the key features are:
  • Axial fan
  • Twist lock grille
  • Grille is able to be easily removed for cleaning
  • Fly-proof grille to keep out insects
  • Fitted with plug and lead
  • High performance motors
  • 380 mm overall intake
  • 330 mm diameter duct
  • 330 mm diameter hole
  • 1090 mm Plug and lead length
  • 4 Blades
  • 1 speed
  • Sleeve bearing motor
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=6230-0

What is the part number for a Plaster frame for the TPLP4 1200mm x 300mm?

The part number for a Plaster frame for the TPLP4 1200mm x 300mm is - CLITPLPPRF12

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=TPLPPRF12