INS125 3P 125A
28908
Compact INS160 3P; Switch Disconnector
INS125 3P 125A
28908
Compact INS160 3P; Switch Disconnector

Compact Interpact Switch Disconnector INS125, 3 Poles, 125A

Catalogue Number: 28910
INS125 3P 125A
28908
Compact INS160 3P; Switch Disconnector
INS125 3P 125A
28908
Compact INS160 3P; Switch Disconnector
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Range
Compact
Range of product
INS40...160
Product name
Compact INS
Product or component type
switch disconnector
Device short name
Compact INS125
Switch-disconnector name
Compact INS125
Poles description
3P
Network type
  • AC
  • DC
    • Network frequency
      50/60 Hz
      [Ie] rated operational current
    • AC-22A: 125 A AC 50/60 Hz 220/240 V
    • AC-23A: 80 A AC 50/60 Hz 660/690 V
    • DC-22A: 125 A DC 125 V 2 poles in series
    • DC-23A: 125 A DC 125 V 2 poles in series
    • AC-22A: 125 A AC 50/60 Hz 380/415 V
    • AC-22A: 125 A AC 50/60 Hz 440/480 V
    • AC-22A: 125 A AC 50/60 Hz 500 V
    • AC-22A: 125 A AC 50/60 Hz 660/690 V
    • AC-23A: 125 A AC 50/60 Hz 220/240 V
    • AC-23A: 125 A AC 50/60 Hz 380/415 V
    • AC-23A: 125 A AC 50/60 Hz 440/480 V
    • AC-23A: 125 A AC 50/60 Hz 500 V
      • [Ui] rated insulation voltage
        750 V AC 50/60 Hz
        [Uimp] rated impulse withstand voltage
        8 kV
        [Ith] conventional free air thermal current
        125 A at 60 °C
        [Icm] rated short-circuit making capacity
      • 154 kA with upstream protection circuit breaker 690 V AC at 50/60 Hz
      • 20 kA switch-disconnector alone 690 V AC at 50/60 Hz
        • [Ue] rated operational voltage
        • 125 V DC
        • 690 V AC 50/60 Hz
          • Suitability for isolation
            yes
            Contact position indicator
            yes
            Visible break
            no
            Pollution degree
            3
            Control type
            rotary handle
            Handle colour
            black
            Mounting mode
            fixed
            Mounting support
          • DIN rail
          • plate
            • Upside connection
              front
              Downside connection
              front
              Maximum power
            • AC-23: 55 kW at 440 V AC 50/60 Hz
            • AC-23: 37 kW at 220/240 V AC 50/60 Hz
            • AC-23: 55 kW at 380/415 V AC 50/60 Hz
            • AC-23: 75 kW at 500/525 V AC 50/60 Hz
            • AC-23: 75 kW at 660/690 V AC 50/60 Hz
              • Rated duty
                uninterrupted
                Intermittent duty class
                class 120 - 60 %
                Enclosure dimensions for Ithe
                260 mm x 160 mm x 55 mm
                [Icw] rated short-time withstand current
              • 0.01 kA during 30 s conforming to IEC 60947-3
              • 1.23 kA during 20 s conforming to IEC 60947-3
              • 3.175 kA during 3 s conforming to IEC 60947-3
              • 5.5 kA during 1 s conforming to IEC 60947-3
                • Mechanical durability
                  15000 cycles
                  Electrical durability
                • AC-22A: 1500 cycles 220/240 V AC 50/60 Hz
                • DC-23A: 1500 cycles 250 V DC 2 poles in series
                • AC-22A: 1500 cycles 690 V AC 50/60 Hz
                • AC-23A: 1500 cycles 690 V AC 50/60 Hz
                • AC-22A: 1500 cycles 380/415 V AC 50/60 Hz
                • AC-22A: 1500 cycles 440 V AC 50/60 Hz
                • AC-22A: 1500 cycles 500 V AC 50/60 Hz
                • AC-23A: 1500 cycles 220/240 V AC 50/60 Hz
                • AC-23A: 1500 cycles 380/415 V AC 50/60 Hz
                • AC-23A: 1500 cycles 440 V AC 50/60 Hz
                • AC-23A: 1500 cycles 500 V AC 50/60 Hz
                • DC-22A: 1500 cycles 250 V DC 2 poles in series
                  • Connection pitch
                    30 mm
                    Height
                    100 mm
                    Width
                    135 mm
                    Depth
                    62.5 mm
                    Net weight
                    0.8 kg
                    Compatibility code
                    INS125
                    Standards
                  • IEC 60947-1
                  • IEC 60947-3
                    • Product certifications
                    • CCC
                    • KEMA-KEUR
                      • IP degree of protection
                        IP40 conforming to IEC 60529
                        IK degree of protection
                        IK07 conforming to EN 50102
                        Ambient air temperature for operation
                        -25-70 °C
                        Ambient air temperature for storage
                        -50-85 °C
                        Sustainable offer status
                        Green Premium product
                        REACh Regulation
                        Free of Substances of Very High Concern above the threshold
                        REACh free of SVHC
                        Yes
                        EU RoHS Directive
                        Compliant
                        Toxic heavy metal free
                        Yes
                        Mercury free
                        Yes
                        RoHS exemption information
                        Yes
                        China RoHS Regulation
                        X
                        Environmental Disclosure
                        ENVPEP1304024
                        Circularity Profile
                        N/A
                        WEEE
                        The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
                        California proposition 65
                        WARNING: This product can expose you to chemicals including: DINP and DIDP which is known to the State of California to cause Carcinogen and Reproductive harm. For more information go to www.p65warnings.ca.gov
                        Warranty
                        18 months

                        Documents & downloads

                        hide show
                        Filter items
                        • All

                        • CAD Files and Packs

                        • Technical Data Catalogues

                        • Catalog Page

                        • Product Environmental

                        • Installation Instruction

                        • End of Life Manual

                        • Operating Manuals

                        • Specification for Tender

                        • Declaration of Conformity

                        Frequently Asked Questions

                        hide show

                        Extended front rotary handle for the 28910 INS 125A Load Break Switch ?

                        Code = LV428941

                        What is the part code for IN160T options

                        The part code is a 28912

                        What is the part code for a din rail mounted isolator, 3P 150A

                         You can use a 28912

                        Is there a front mounted extended handle to fit the 28912?

                        Yes it is the 28941.

                        What is the replacement for a 5 Series Load Breaker 5LBC4125CD?

                        The replacement for 5 Series load breaker 5LBC4125CD is a schnieder 31335.

                        For further information please visit the link below.

                        https://www.schneider-electric.com.au/5ser31335

                        https://www.elteh.eu/wp-content/uploads/schneider/H619250_web.jpg

                        Does a UV trip or UVR undervoltage release sense phase loss?

                        Issue:
                        Does a UV trip or UVR undervoltage release sense phase loss?

                        Product Line:
                        Circuit Breakers

                        Environment:
                        Circuit breakers that have a UVR undervoltage trip

                        Resolution:
                        The UVR will sense phase loss only on the phase(s) its control power is taken from. The UVR should not be used in place of a phase-failure. See the latest Digest for phase-failure relay information.

                        Replacement for a 28945

                        The equivalent part number in Australia is 28943.


                         

                        What is the IP rating of the 28943 extended rotary handle ?

                        The IP rating of the 28943 rotory handle is IP55

                        What is the alternative part number for the 28941 INS extended handle?

                        The alternative part number is
                        LV428941
                         

                        How do we determine the maximum point of encoder ?

                        Goals and Symptoms

                        How do we determine the maximum point of encoder ?

                        Facts and Changes

                        ATV71
                        Codeur
                        Encoder

                        Causes and Fixes

                        Fmax = 300 Khz
                        Maximum point of encoder = 5000

                        The formule is :
                        Encodeur point = 1/rpm x Fmax x 60, rpm is the speed of the motor.

                        Example : Motor 50Hz 2830 tr/mn using at 110Hz then 6226 tr/mn
                        The calcul done = 2891 it must take a 2048 point


                        Legacy KB System (APS) Data: RESL173103 V1.0, Originally authored by on , Last Edited by on
                        Related ranges: Altivar 71

                        What is the maximum shaft length of the 28941?

                        The max length of the shaft is 450mm.

                        Is there a replacement handle for the INS63 / 28902?

                        Yes - The 28962 suits the INS40 - INS60 load break switches

                        What is the Multi9 1P circuit breaker lock

                         The part code you need is a 26970

                        Is the 28941 the shaft for the extended handle on the INS160

                         Yes it is the correct part code

                        What is the load break switch 63Amp 3P dinrail mounted with extended rotary handle

                        You can use a 28902 load break switch with a LV428941 extended rotary handle

                        What padlocking device can be used with the Domae range?

                        You can use the 26970

                        Is there anything other than a lock that can be fitted to a breaker to keep it in the off position in the DOMAE range

                        No there is nothing other that the 26970

                        What is the part code for an MCB

                        Use the 26970 for the C60& 120's  - 1 for the 1 & 2pole  - 2 for the 3pole and larger

                        What is the replacement for RM4JA01F?

                        The replacement is RM22JA21MR, but if not in stock, can offer the RM35JA31MW 
                        see data sheets for more information.....https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=RM35JA31MW
                        https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=RM22JA21MR
                        User-added image

                        What is the replacement for the RM4JA32F?

                        Replacement for the RM4JA32F is the RM35JA32MW
                        For more information, see data sheet.....https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=RM35JA32MW
                        User-added image

                        What is the part number for the black handle only to suit extended rotary handle 28943?

                        The part number for the black handle only to suit extended rotary handle 28943 is - 28962

                        For further information visit the link below:-
                        https://www.schneider-electric.com.au/en/search/28962
                        User-added image

                        Is it possible to padlock the C60 MCB.

                        For padlocking the C60 MCB use part reference 26970. Find attached the Installation Manual for the same.
                         
                        Note: For 3P, 3P+N and 4P MCBs, use 2 numbers of 26970.
                         

                        How do I view SoMachine variables in Vijeo Designer?

                        Vijeo Designer uses ModbusRTU or Modbus/TCP to read and write data to a M171/172 HVAC controller. Only SoMachine HVAC Status Variables have an assigned modbus address. Therefore only Status Variables can be Viewed and written to by a Magelis HMI. You can define Status Variables in you SoMachine HVAC project in the Resources Tab. When you create a Status Variable, SoMachine HVAC automatically assigns an address to the variable. Such as 8960. In Vijeo Designer you would reference that address by using 48960 in your variable definition window.

                        How to Simulate Events in SER Using a CM4000 or Monaghan ProTime Sequence of Events Module


                        CM4000 (CM4)

                        To simulate descrete input switching(On and Off), use SMS, PAE generic Modbus/Jbus Tester or some other Modbus utility write holding registers:

                         

                        Modbus Register Value

                        8000 32333 command to begin input simulation mode.

                        8001 9999

                        8002 1 or 2 for number of seconds on

                        8003 1 or 2 for number of seconds off

                         

                         

                         

                        Protime

                        Test mode is entered by writing to the holding register 1577 as indicated below:

                         

                        Modbus Register Value

                        1577 21930 test mode on

                         

                        To disable test mode.

                        1577 set to any other value to turn off test mode.

                              • OR ten minutes will turn off.

                        Writing a value of 21930 decimal to register number 1577 will cause the ProTime module to simulate status input changes for a period of approximately 15 minutes. This can be useful for testing to see that events from an SER module are being recorded by the SER software.

                        Keywords: Sequence of Events Recording, Sequence of Events Recorder, SER 6.0, 6.3, 7.0, 7.1

                        Legacy KB System (APS) Data: RESL198177 V2.0, Originally authored by AnVa on 04/01/2009, Last Edited by MaTh on 09/28/2011
                        Related ranges: Sequence of Events Recorder (SER)

                        What is the native resolution of the encoder counts for Lexium 28 servo drives?

                        The native resolution for Lexium 28 is 1280000 counts per revolution on the motor.

                        This is important to know especially when using the LXM28 in gear mode.
                        The factory default ratio for gear mode is 128/10      (128 = numerator  10 = denominator)
                        The equates to 128 motor increments for 10 pulses applied to the pulse train input.  


                        Rev 10-23-18
                         

                        What is the native resolution of the encoder counts for Lexium 28 servo drives?

                        The native resolution for Lexium 28 is 1280000 counts per revolution on the motor.

                        This is important to know especially when using the LXM28 in gear mode.
                        The factory default ratio for gear mode is 128/10      (128 = numerator  10 = denominator)
                        The equates to 128 motor increments for 10 pulses applied to the pulse train input.  


                        rev 10-19-17

                        How to solve printing size problem with SFT 2841?

                        Issue
                        The printing size is incorrect whether you use a printer resolution different from 600 DPI.

                        Workaround

                        Always choose a 600 DPI resolution for the printer.

                        More Information

                        This problem occurs with SFT 2841 version 4.0.

                        Re-published to revised security level: 17 June 2008 by DRM

                        Applies To: SFT2841

                        Original Author: FK

                        Public

                        All content © 1992-2008 Schneider Electric


                        Legacy KB System (APS) Data: RESL166712 V2.0, Originally authored by FrKr on 06/18/2008, Last Edited by DaMi on 06/18/2008
                        Related ranges: SFT 2841 - SFT2848 (Sepam series 20, 40, 80 software)

                        Using Modbus to trigger a Waveform Capture on a CM2000

                        Product Line
                        CM2000 series meter

                        Environment
                        Modbus Register Writes

                        Resolution
                        In order to trigger a waveform capture, it will be necessary to use Modbus Command Writes to trigger the waveform capture.

                        Using Modbus Tester (or another Modbus read/write program):

                        Write the value 4913 to register 7700.
                        Write the value 1 to register 7701.
                        Write the value 28120 to register 7702.

                        Problem of no immediate recognition of a change of password with SFT 2841.

                        When a password is modified on the DSM UMI of the Sepam 1000+ during the connection processing of the SFT2841 software to this Sepam, SFT2841 software doesn't take into account the modification and still accept the previous password.
                        Ask for "disconnection" and then "Connection" again by using SFT2841,such as this one takes into account the new password.

                        Problem on SFT2841 v4.0 only . Corrected on version 4.1.

                        Re-published to revised security level: 17 June 2008 by DRM

                        Applies To: Sepam 1000+ (Sepam Series 20 and Sepam Series 40)

                        Original Author: FK

                        Public

                        All content © 1992-2008 Schneider Electric


                        Legacy KB System (APS) Data: RESL166709 V2.0, Originally authored by FrKr on 06/18/2008, Last Edited by DaMi on 06/18/2008
                        Related ranges: SFT 2841 - SFT2848 (Sepam series 20, 40, 80 software), Sepam series 40, Sepam series 20

                        Required ports for PME Engineering Client Licensing

                        Issue
                        Engineering Client installations require two TCP ports be opened between the server and client machine in order for the license to be seen by the Client machine. The PME 7.2.x installation guide does not currently include these ports. However, the PME 8 installation guide has been updated to include these ports as well as information on how to change them if necessary.

                        Product Line
                        Power Monitoring Expert 7.2.x, PME 8.0, PME 8.1

                        Environment
                        Engineering Client Installations in PME

                        Cause
                        Often the TCP ports that the Engineering Client requires for licensing are blocked between the server and client machines. 

                        Resolution
                        Before performing a PME Client installation, ensure that both the client and primary machines can
                        resolve each other by name. Then open the following ports. 
                        Port 1: Enterprise License Server port
                        This port can be viewed in the Flexnet Publisher (https://localhost:8090). Login with admin/admin on the Administration tab. The “License Server Manager Port in Use” is on the System Information tab. Open this port between the server and client machines.

                         
                        Port2: Vendor Daemon Port
                        This port by default is a dynamic port. In order to open a port for the client to see, the port needs to be set to be static.
                        To set the Vendor Daemon port to static:
                        - In Flexnet Publisher (https://localhost:8090), navigate to the Vendor Daemon Configuration tab and click the “Administer” link
                        - Set the Vendor Daemon Port to 27010 (or another port if this is taken) and hit Save.
                        Open this port between the server and client machines.

                        PowerSCADA Expert 8.2 Update 5 - Release Notes

                        Issue
                        What is new in PSE8.2 and a detailed listing of resolved problems and minor enhancements.

                        Product Line
                        PowerSCADA Expert 8.2 (PSE8.2)

                        Environment
                        Installer
                         
                        Cause
                        A new PSE8.2 cumulative update release.

                        Resolution
                        PowerSCADA Expert 8.2 Update 5 - Release Notes
                        Release Notification (Updated 25 April 2018)

                        This is a detailed listing of resolved issues and minor enhancements in this release.

                         


                         

                        Prerequisite

                        You must have PowerSCADA 8.2 installed prior to installing this update. No previous updates are required.

                        Cybersecurity Announcement

                        Floating License Manager v2.1 addresses vulnerabilities in the Flexera FlexNet Publisher component detailed in CVE-2016-10395, CVE-2017-5571 and CVE-2016-2177. Uninstall the current version of the Floating License Manager, and then install version 2.1.
                        NOTE: The Floating License Manager v2.1 installer is included with this hotfix release but is not a part of the hotfix installer. Unzip "Floating License Manager v2.1.zip" and run "setup.exe".

                        Important Notice: There is a known issue with the Floating License Manager v2.1.0.0 installer. When installing with a logged-in Windows User name containing a space, the install will not succeed. The workaround is to install the Floating License Manager with a user that does not include a space character in their name.

                        Bug Fixes and Enhancements

                        TFS 21482 - AlarmEvents with a state of normal returned in GetAlarmEvents response for EWS

                        GetAlarmEvents was changed to not return alarms in the normal state.

                        TFS 21483 - Incorrect timestamp information provided for AlarmEvents not in the Active state

                        Alarm timestamps are now updated to reflect the true timestamp of occurrence for all state changes (active, drop out, acknowledge).

                        TFS 21484 - Unable to filter AlarmEvents by Type using EWS

                        Alarms are now filtered based on type. 

                        TFS 21485 - Unable to successfully acknowledge alarms using EWS

                        In some situations, EWS would not acknowledge alarms correctly.  This behavior has been fixed.

                        TFS 21486 - Unable to filter alarms using the PriorityTo and PriorityFrom fields

                        EWS did not observe the priority field correctly. This has been addressed and the minimum allowable priority has been set to 1 (to exclude non-alarm objects in the PowerSCADA alarm database).

                        TFS 21557 - PowerSCADA projects - including the starter project, PLS_Include, and PLS_Example - need to be upgraded to support the new DBF schemas

                        PowerSCADA projects have been upgraded to the latest DBF schemas.  If there are existing projects created from the starter project, set [CtEdit] Upgrade = 1 in the Citect.ini file using the Setup Editor, and then restart PowerSCADA Studio.

                        TFS 21564 - Alarm Proxy does not show the analog alarm states

                        Alarm Proxy now reports the analog alarm states (HIGH HIGH, HIGH, LOW, LOW LOW) instead of ON / OFF.

                        TFS 21566 - If a CSV file that does not exist is selected in the I/O Device Manager, the application throws a runtime exception

                         

                        A message is displayed indicating that the file does not exist.

                         

                        TFS 21569 - On large systems with 200k configured alarms, the GetAlarmDefinitions call in Alarm Proxy is slow and causes ENM to timeout

                        Performance issue in alarm proxy has been resolved.

                        TFS 21649 - When CoreServiceHost adds and removes devices, it may lose the original IDs

                        CoreServiceHost now keeps a device chronicle.  When the device is removed and then later added, the ID will remain the same.

                        TFS 21913 - If the equipment name is changed in the system, but the I/O Device name is unchanged, CoreServiceHost will not refresh the equipment name

                        CoreServiceHost now properly updates the equipment on name change.

                        TFS 21935 - Logs that are too large for the Windows Event Log do not get logged properly

                        Large logs are now broken down into smaller log entries.

                        TFS 21970 - Profile Wizard and Automation does not support IPv6

                        Profile Wizard and Automation now supports IPv6 for TCP/IP Board level drivers.  This requires the TCP/IP Driver version 4.0.0.0 or later.

                        TFS 21975 - Open and Close buttons are disabled at runtime on equipment popup when separate digital tags are used for commands

                        The form now enables the command buttons if the Pos_On or Pos_Off tags are defined.

                        TFS 21979 - Alarm Proxy cannot return alarms that transition to inactive

                        This setting is now configurable in the Application Configuration Utility.

                        TFS 22043 - Single sign-on calls from a remote thick client do not work

                        Single sign-on now detects remote clients.

                        TFS 22060 - The I/O Device Manager cannot bulk import devices with device names greater than 16 characters

                        The I/O Device Manager now reads the device name length from the equipment.profiles file for proper validation.

                        TFS 22066 - Wonderware ArchestrA Logger Security Patch

                        Wonderware ArchestrA Logger Patch 2017.517.2328.1 is applied.

                        TFS 22150 - Alarm filters do not work on some resolutions

                        Alarm filter AN numbers are fixed for all alarm page resolutions.

                        TFS 22155 - Alarm filters perform exact matching

                        The alarm filter screen allows the user to select the filtering mode. The default setting is read from the INI file [Alarm] FilterMode.  0 (default) = Exact Match, 1 = Starts With, 2 = Ends With, 3 = Contains.

                        TFS 22306 - The equipment tree used on alarm pages is slow to render over the web client

                        Any page using the equipment tree should set the default library and symbol on the equipment tree genie, or set 'Hide Symbol Icons' to 'TRUE' if a default icon is not available.

                        TFS 22401 - Alarm filter and equipment tree filter operate independently

                        The alarm filter and equipment tree filter operate together to filter the alarm tables.

                        TFS 22896 - Core service host logs two warnings during shutdown - exception thrown during disposal.

                         

                        Cleanup methods were reworked to prevent the exception.

                         

                        TFS 22898 - EWS cannot obtain tag updates at a 5 second rate

                        EWS and core services were updated to obtain data at a 5 second poll rate.

                        TFS 23262 - Equipment popup alarm table does not acknowledge or disable alarms

                        Alarms can now be acknowledged or disabled in the equipment page.

                        TFS 23274 - Equipment.profiles cannot be imported into the Profile Editor in cases where the original Device Types and Device Profiles were lost

                        The Profile Editor can import the equipment.profiles file to generate device types, device profiles, and tags.

                        TFS 23437 - Citect 2016 Updates

                         

                        Citect 2016 Update (April 10, 2018) is included with this update.

                        Project ID management was removed from Citect 2016.  Project IDs are now located in the ProjectInfo.xml file. 

                        MinUnitNumber and MaxUnitNumber (previously stored in UnitNumberRange.xml) have also been migrated to ProjectInfo.xml.

                         

                        TFS 23637 - The Alarm Summary page does not display state information

                        The Alarm Summary page now displays the state that caused the alarm.

                        TFS 23650 - 8.2 install does not enable ASP feature within IIS

                        The installer now enables the ASP feature under IIS. This server role feature is required to run the Citect web control client. (Previously the View-Only web client was the only option for web deployment.)

                        TFS 24205 - When Core Services receives a timeout from the Client, alarm processing may halt until the service is restarted

                        Core Services properly recovers from a ctApi deadlock condition.

                        Files Modified

                        Applications\AppServices\bin\Framework.dll
                        Applications\AppServices\bin\Framework.ServiceHost.exe
                        Applications\AppServices\bin\Modules.CoreServices.dll
                        Applications\AppServices\bin\PowerLogic.Cipher.dll
                        Applications\AppServices\bin\Modules.ProviderBase.dll
                        Applications\AppServices\bin\Modules.ProviderEngine.TestHarness.exe
                        Applications\AppServices\bin\ObjectFactoryTools.exe
                        Applications\AppServices\bin\ProviderGatewayProviders.dll
                        Applications\AppServices\bin\PowerSCADA.Common.dll
                        Applications\AppServices\bin\Modules.Platform.Citect.dll
                        Applications\EWS\bin\Framework.dll
                        Applications\EWS\bin\EWS.dll
                        Applications\EWS\Web.config
                        Applications\EWS\DataExchange.svc
                        bin\de\ProfileEngine.resources.dll
                        bin\de\ProfileWizard.resources.dll
                        bin\de\WizardLibrary.resources.dll
                        bin\es\ProfileEngine.resources.dll
                        bin\es\ProfileWizard.resources.dll
                        bin\es\WizardLibrary.resources.dll
                        bin\fr\ProfileEngine.resources.dll
                        bin\fr\ProfileWizard.resources.dll
                        bin\fr\WizardLibrary.resources.dll
                        bin\it\ProfileEngine.resources.dll
                        bin\it\ProfileWizard.resources.dll
                        bin\it\WizardLibrary.resources.dll
                        bin\ja\ProfileEngine.resources.dll
                        bin\ja\ProfileWizard.resources.dll
                        bin\ja\WizardLibrary.resources.dll
                        bin\ko\ProfileEngine.resources.dll
                        bin\ko\ProfileWizard.resources.dll
                        bin\ko\WizardLibrary.resources.dll
                        bin\ru\ProfileEngine.resources.dll
                        bin\ru\ProfileWizard.resources.dll
                        bin\ru\WizardLibrary.resources.dll
                        bin\zh-chs\ProfileEngine.resources.dll
                        bin\zh-chs\ProfileWizard.resources.dll
                        bin\zh-chs\WizardLibrary.resources.dll
                        bin\zh-cht\ProfileEngine.resources.dll
                        bin\zh-cht\ProfileWizard.resources.dll
                        bin\zh-cht\WizardLibrary.resources.dll
                        bin\ProfileAutomation.dll
                        bin\ProfileEngine.dll
                        bin\ProfileWizard.exe
                        bin\WizardLibrary.dll
                        bin\ProfileAutomationUtility.exe
                        bin\CommsMethodProperties.xml
                        bin\DeviceManagementUserControlLibrary.dll
                        Applications\Profile Editor\Tags.xml
                        Applications\Profile Editor\ProfileEditor.Business.dll
                        Applications\Profile Editor\ProfileEditor.exe
                        Applications\Profile Editor\ProfileEditor.UserControls.dll
                        Applications\Profile Editor\Resources\ProfileEditor.UserControls.resources
                        User\PLS_Include\*
                        User\PLS_Example\*
                        Starter\Default_Starter.ctz

                        Installation

                        Unzip "PowerSCADA Expert 8.2 Update 5.zip" and run "PowerSCADA Expert 8.2 Update 5.exe".

                        Video: What auxiliary contact modules are available for the LC1D and LC2D contactors?

                        Issue:
                        Auxiliary contact modules for the LC1D and LC2D contactors

                        Product Line: 
                        Contactor and Starters - IEC

                        Environment:
                        North American Products

                        Resolution:
                        Select based on application requirements. Please note that the TeSys and Pre-TeSys auxiliary blocks are backward/forward compatible.
                        Front Mounting; maximum of 1 block per contactor:

                        N.O.-------N.C.-----TeSys P/N--------Pre-TeSys P/N
                        --1-----------1---------LADN11-----------LA1DN11
                        --1-----------1---------LADN11G---------LA1DN11G (See Footnote 1)
                        --1-----------1---------LADN11P---------LA1DN11P (See Footnote 1)
                        --2-----------0---------LADN20-----------LA1DN20
                        --2-----------0---------LA1DX20---------LA1DX20 (See Footnote 2)
                        --2-----------0---------LA1DY20---------LA1DY20 (See Footnote 3)
                        --0-----------2---------LADN02-----------LA1DN02
                        --2-----------2---------LADN22-----------LA1DN22
                        --2-----------2---------LADN22G---------LA1DN22G (See Footnote 1)
                        --2-----------2---------LADN22P---------LA1DN22P (See Footnote 1)
                        --2-----------2---------LADC22------------LA1DC22 (See Footnote 4)
                        --3-----------1---------LADN31------------LA1DN31
                        --3-----------1---------LA1DZ31----------LA1DZ31 (See Footnote 5)
                        --1-----------3---------LADN13------------LA1DN13
                        --4-----------0---------LADN40------------LA1DN40
                        --4-----------0---------LA1DZ40-----------LA1DZ40 (See Footnote 6)
                        --0-----------4---------LADN04------------LA1DN04




                        Front Mounting; maximum of 1 block per contactor: For use with D2 Series 25 amp through 80 amp contactors and TeSys Series 40 amp through 80 amp only.

                        N.O.-------N.C.-----TeSys P/N--------Pre-TeSys P/N
                        --1-----------0--------LADN10----------LA1DN10
                        --0-----------1--------LADN01----------LA1DN01

                        Side Mounting; maximum of 1 block on each side for D2 Series and Tesys Series 40 through 80 amp contactors. Tesys 9 through 32, 115, and 150 amps contactors will accept 1 block and is limited to left side only. (*) DC control devices will not accept side mount auxiliaries.
                        (*) DC control exceptions that will accept one left side mounted auxiliary: LC1D115 & LC1D150.

                        N.O.-------N.C.-----TeSys P/N--------Pre-TeSys P/N
                        --1-----------1--------LAD8N11----------LA8DN11
                        --2-----------0--------LAD8N20----------LA8DN20
                        --0-----------2--------LAD8N02----------N/A

                        Footnotes:
                        {1} EN50 012 Machine Tool Terminal Markings
                        {2} (2) NO Sealed Dust Tight Contacts
                        {3} Gold Flash Contacts
                        {4} (1) NO & (1) NC Standard and (1) NO & (1) NC Make Before Break
                        {5} (2) NO Dust Tight Contacts & (1) NO & (1) NC Standard Contacts
                        {6} (2) NO Dust Tight Contacts & (2) NO Standard Contacts

                        Are EasyPact MVS circuit breakers for sale in the USA or Canada?

                        Issue:
                        Where can I buy a EasyPact MVS breaker?

                        Product Line:
                        EasyPact MVS circuit breakers

                        Resolution:
                        There are no plans for a general release of the EasyPact MVS circuit breaker line in the US.