Quantcast

Cable Glands - Non Metallic - IP56, 16mm Thread, 4.0 to 9.8mm diameter cable

Black | Cable Glands - Non Metallic - IP56, 16mm Thread, 4.0 to 9.8mm diameter cable

Cable Glands - Non Metallic - IP56, 16mm Thread, 4.0 to 9.8mm diameter cable

Item Number: 282/16-BK

Retail
$18.59
RRP (Inc. GST)

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Product brand

Clipsal

Physical

Cable outer diameter

4-9.8 mm

IP degree of protection

IP56

EU RoHS Directive

Under investigation

Others

Number of Units in Package 1

1

Package 1 Height

25 mm

Package 1 Length

39 mm

Package 1 width

25 mm

Unit Type of Package 1

PCE

Thread type

M16

Package 1 Weight

0.02 kg
Show all specifications

Frequently Asked Questions

hide show

Are the Clipsal Conduit Clips available in Electric Orange?

No, they are only available in grey.

This applies to the 280/16 (16mm), 280/20 (20mm), 280/25 (25mm), 280/32 (32mm), 280/40 (40mm) and 280/50 (50mm).

How many 261/16 Clipsal saddles are there in a carton?

There are 50 16mm saddles in a carton.

Note: This information can be found in your Clipsal pocketbook right next to the part code.

What are the processes associated with PowerSCADA Expert?

Issue
The processes associated with PowerSCADA Expert.

Product Line
PowerSCADA Operations, PSO
PowerSCADA Expert, PSE
PowerLogic SCADA, PLS

Environment
Runtime Manager
Task Manager

Cause
In cases that a project does not start or shut down properly, it is advised to check the processes.  In the case the project did not shut down properly, the process can be killed manually using Windows Task Manager.  This way upon a restart of Runtime Manager, the project starts without any problem.

As such it is important to know the associated processes.

Resolution
The example below shows a project with six I/O Servers (numbered 2, 4, 6, 8, 10 and 12), a Trend Server, one Alarm Server and a Client (represents the main project); a total of 9 processes as shown in Runtime Manager.

NOTE: While the screenshot below applies to older version of SCADA, the same analogy applies to newer versions.

          

The processes above can be verified in Windows Task Manager as shown below.  There is an entry for each of the above 9 processes, each labeled Citect32.exe *32.  Note the one-to-one correspondence among the Process IDs in Task Manager and Process IDs in Runtime Manager.  For example PID 22716 in Task Manager corresponds to IOServer6 as show in the above picture.

          


NOTE: The last three processes in the above screenshot applies to PSE 8.1 and older; more explanation below.

In case SCADA application is open for editing a project, there will be additional processes.  Process names and their corresponding application are shown below.  Depending on the version, different applications open.

1. SCADA version 8.1 and older:

CtDraw32.exe *32     Citect Graphics Builder
CtEdit32.exe *32       Citect Project Editor
CtExplor.exe *32       Citect Explorer

2. SCADA version 8.2:

PowerSCADA Studio (32 bit)     PowerSCADA Studio

          



Example of a PowerSCADA 8.2 project with 5 process and PowerSCADA Studio open for editing:

1. Runtime Manager:

          

2. Task Manager (Details tab):