tor cond plain/scr 25mm
adaptor cond plain/scr 25mm
tor cond plain/scr 25mm
adaptor cond plain/scr 25mm

SoLid Fittings - PVC, Adaptors - Plain To Screwed Conduit, 25mm

Catalogue Number: 263/25
tor cond plain/scr 25mm
adaptor cond plain/scr 25mm
tor cond plain/scr 25mm
adaptor cond plain/scr 25mm
Colour: Grey
Colour: Per UOM Std.
  • Electric Orange 1 PCE
  • Grey 1 PCE
Added to cart

Specifications

hide show
Product brand
Clipsal
Range of product
Series 263
Material
PVC (polyvinyl chloride)
Connector type
thread connector
Product destination
diameter: 25-25 mm tube
Length
42-42 mm
Standards
AS/NZS 2053
REACh free of SVHC
Yes
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • Technical Data Catalogues

  • Installation Instruction

  • Specifications

  • Certificates (MSDS)

Frequently Asked Questions

hide show

Is part number 260/25 available in Orange?

No. Unfortunately, the 260/25 is only available in Grey.

What is the standard pack size of the 262/25?

The standard pack size of the 262/25 is 50

Some of the key features are:
  • Rigid Tube
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=262/25
 

What are the part numbers for the 25mm PVC saddles and spacers?

The part numbers are 261/25 for the saddles and 261S25 for the spacers. 

Some of the key features are:
  • 63mm Length x 20mm Width x 29mm Overall Height
  • 48mm Mounting Centre
For further information please visit https://www.clipsal.com/Trade/search-results?q=261/25



 

What is the replacement for 563/2J two screw connector, jar of 50?

563J/50 is a replacement for  563/2J. 563J/50 is single cable connectors terminal 40A, 50 per jar. Suitable for the earth, active and neutral conductors.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?CatNo=563J/50&c=1&ms=2&s=1&mg=319&g=3192772


 

What is the part number for 238A with 25mm spout?

The 238/25 has 1 x 25 mm spout & 2 x25 mm conduit entries.

What is the replacement for 563B/1, 563/2, 563G1 and 563G2?

563B/100 replaces 563/1, 563/2, 563G1 and 563G2.

Some of the key features are:
  • Single screw connectors will suit either a No. 2 Philips Drive or a No. 1 Square Drive screwdriver
  • Connectors are fully compliant with AS/NZS3000:2007 as per clause (d) from Sub-section 2.9.4. for active, neutral and earth connections
  • Connectors will be packed only in boxes of 100 for better convenience and transportation
  • Terminal connectors will now be square wrapper design, ensuring reliable connection
Further information can be found at https://www.clipsal.com/Trade/Products/ProductDetail?catno=563B/100

Are the Clipsal Conduit Clips available in Electric Orange?

No, they are only available in grey.

This applies to the 280/16 (16mm), 280/20 (20mm), 280/25 (25mm), 280/32 (32mm), 280/40 (40mm) and 280/50 (50mm).

What is the height of a 261E25?

The 261E25 has a height of 18mm.
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=261E25

What is the part number for a surface mount enclosure to suit 319HP Pneumatic timer?

238/25 is a surface mount enclosure with 25mm end entries that will suit 319HP.

For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=238/25

What are the part numbers of slip type expansion couplings?

Slip Type Expansion Couplings are available from 16mm through to 50mm.The part numbers of slip type expansion coupling are as follows:
16mm = 251/16
20mm = 251/20 *
25mm = 251/25 *
32mm = 251/32
40mm = 251/40 *
* = only available in Grey
Where long conduit runs are likely to be exposed to wide variations in temperature, it is recommended that expansion couplings be used at each join. It is not recommended that Slip Type Expansion Couplings be used where the conduit run is exposed to the weather. Standard colour is Grey (GY).
Dimension details are attached.
 

What are the dimensions for a 261S Saddle Spacer?

The dimensions for a 261S Saddle Spacer are 261S are:
 
Saddle Spacers
Catalogue Number Size Length (L) Width (W) Centres (CRS.) Standoff (T) Height (H)
261S16 16mm 55mm 21mm 32mm 8mm 14mm
261S20 20mm 61mm 22mm 40mm 8mm 14mm
261S25 25mm 74mm 26mm 48mm 8mm 14mm

Saddles Spacers set a conduit run off the wall 8mm to allow easier cleaning and repainting and to facilitate entry into equipment. They are available in sizes 16mm through 25mm.
Standard colour is Grey (GY), with Orange (EO) also available at extra cost.

For further information please visit www.clipsal.com/Trade/search-results?q=261S


 

What is the part number for the Relay and RPO connector for the Conext CL inverters?

One set of dry contact Relay and RPO connectors are provided along with the wiring box packaging.
The Relay and RPO connector is included in a plastic bag with other connectors, if it is lost, you will have to purchase another one.
The part number is 0J-0L2344 (Lit Kit IEC CL 20/25 kw Rohs package)

What is the operating temperature of the 563/1 and the 563/2 1 and 2 screw bluepoints?

Our connectors are made of Polypropylene (which is a flame retardant material) according to the supplier this material can hold up top +-165C.
Although I will not recommend more than room temperature + 40C.
Keep in mind cables will not stand such temperature anyway as they normally rated between 75C to 90C

Some of the key features are:
  • Cable Connectors
  • Single or double screw
  • Clear insulated
  • Suits up to 2 x 6mm² cables


 

Accutech values from ModBUS are close but do not match what is on the display

Problem:

The Accutech field unit display is showing one value but the local HMI is seeing a slightly different value. The value is close but not quite the same and it doesn't seem to fluctuate or show typical noise you might see from a regular analog signal.
 

Solution 1:

One possibility is that the process value is changing faster than the modbus variables are updating. As a battery powered, wireless RF field device, certain communication delays are inherent.
  • The field unit updates it's readings based on the configured Sample Rate (SR).
  • The field unit transmits its values back to the base radio based on the configured Transmit Rate (TR).
  • The PLC or HMI will poll the base radio for data periodically based on it's polling rate (PR).
  • Any RF weakness or interference can also cause retries and resynchronizations to add additional delay.
Note: Sample Rate and Transmit Rate will affect the expected battery life for the Accutech field unit.

These delays can mean that it will take some time for a change in values to make it's way through to an HMI or PLC.
For example, assume SR = 5 seconds, TR = 20 seconds , PR = 60 seconds. The worst case scenario, would involve the process value changing at t = 0. The field unit polls the new value at t = 5 seconds, it then gets transmitted to the base radio twenty seconds alter at t = 25 seconds and the PLC polls it a minute later at t = 85 seconds. The PLC now sees the value from nearly a minute and a half ago.
 

Solution 2:

A second possibility can be caused by a mismatch in the floating-point word-order in combination with a modbus table offset.

The base radio stores its field unit process values as 32-bit floating-point numbers. By default, the base radio stores the FP low word in the low register and the high word in the higher register number (MODBUR ORDER = 3412 by default). SCADAPack RTUs store 32-bit floating point numbers with the word order swapped. That is the FP low word is in the higher register number and the FP high word is in the lower register number. This corresponds to a base radio with MODBUS ORDER = 1234.

In addition to word order, different devices use different conventions for numbering their registers.
In a Base Radio or SCADAPack RTU, the very first holding register in the table (a register offset of 0) is identified as register 40001.
For some other devices, the very first holding register in the table (a register offset of 0) could be identified as register 40000.
This discrepancy can cause the expected register addressing to be off by 1.

These two factors combined can result in seeing a process value that is close but not quite. For example:



The base radio is storing it's temperature value in registers 40015 and 40016 of the base radio and it shows the correct value of 23.33 degrees C.

In the second case with the word order swapped and looking at the register index off by 1, you could come across the value of 23.375 degrees C which is close to the expected value but not quite.

To ensure this isn't the case with a system setup, it is important to poll for all of the field unit registers and examine all of the results.

In the second case, the least significant word will always be FFFF so you won't see tiny fluctuations in the process value that you might expect for an analog value. In fct, you might not see a change until the temperature reaches 23.25 (41B9FFFF)  or 23.5 degrees (41BBFFFF).

Where can I get support for APC and MGE Products?

For support on APC and MGE products please visit:  https://www.apc.com/support/

AC Power
Additional Management Cards and Options
Air Cooled Chillers
Air Distribution Accessories
Airflow Management
AIS 3000
AIS 5000
AIS Accessories
AIS Battery Systems
APC CS
APC Enterprise Manager
APC ES
APC RS
Application Shutdown Utilities
Assessment Services
Auto and Air Inverters
AV Accessories
AV Power Conditioners & Battery Backups
AV Power Filters
AV Pro Interconnects
AV Surge Protectors
Backpacks and Messenger Bags
Back-UPS
Back-UPS Accessories
Back-UPS BI
Back-UPS CS
Back-UPS ES
Back-UPS HI
Back-UPS HT
Back-UPS LS
Back-UPS Office
Back-UPS Pro
Back-UPS RS
Back-UPS XS
Basic Rack PDU
Battery Management
Battery Replacement Services
Biometric Security
Bulk Cable
Cabinet Power Distribution
Cable Management
Charge-UPS EX
Commercial/Industrial Surge Suppression
Condensers
Configurable Power Accessories
Configurable Power Distribution
Console Port Servers
CyberFort
Data Center Facility Cooling - Andover Continuum or TAC Vista
Data Center Facility Power - PowerLogic ION Enterprise
Data Center Software Integration Kits
Data Center University
Data Distribution Cable
DC Battery
DC Components
DC Distribution Components
DC600
Desktop KVM
Desktop Notebook Stands
EcoBreeze Air Economizers
Environmental Management System
Environmental Monitoring Unit
Ethernet Switches
Extended Warranties
Fiber Optics
Firmware Upgrades
FLM Series
Fluid Coolers
FRP/Ferroresonant Power Supply
Game Console Surge Protection
Gender Changers
Global Deployment
Hardwire Surge Suppression Accessories
High-Density Cooling Enclosures
IDE Cables
IEEE1394
Industrial
InfraStruxure for Large Data Centers
InfraStruxure for Medium Data Centers
InfraStruxure for Server Rooms
InfraStruxure for Small Data Centers
InfraStruxure for Wiring Closets
InfraStruxure Manager
InfraStruxure Type A
InRoom Direct Expansion
InRow Chilled Water
InRow Direct Expansion
InRow Pumped Refrigerant
Installation Services
Interface Cables
International Plug Adapters
Keyboard
KVM Switches
Laptop Power Adapters
Line-R
Magnum VS
Magnum XS
Magnum XS Rectifier
Maintenance Bypass Panels
Management Platform Integration
Matrix Battery Systems
Matrix-UPS
Matrix-UPS Accessories
Metered Rack PDU
Metered-by-Outlet Rack PDU
MGE Accessories
MGE Alpes
MGE Battery Systems
MGE Comet
MGE EPS
MGE EPS 6000
MGE EPS 7000
MGE EPS 8000
MGE Galaxy
MGE Galaxy 300
MGE Galaxy 3000
MGE Galaxy 3500
MGE Galaxy 4000
MGE Galaxy 5000
MGE Galaxy 5500
MGE Galaxy 6000
MGE Galaxy 7000
MGE Galaxy 9000
MGE Galaxy PW
MGE Legacy
MGE Service Bypass
MGE Sinewave
MGE Static Transfer Switches
MGE UPS 4000
Microsol Estabilizadores
Microsol Modules Isoladores
Mobile Notebook Stands
Modular Components
Modular Power Accessories
Modular Power Distribution
Monitor
Mounting Hardware
Mouse
MRC1800
MRE2400
Multimedia
MWF1700
NetBotz 200
NetBotz 300
NetBotz 400
NetBotz 500
NetBotz Access Control
NetBotz Accessories and Cables
NetBotz Central
NetBotz Rack Access
NetBotz Sensors
NetShelter CX
NetShelter EP Enclosures
NetShelter ES Enclosures
NetShelter Open Frame Rack Accessories
NetShelter SX
NetShelter VL
NetShelter VS Enclosures
NetShelter VX Enclosures
Network Integration Services
Network Patch Cables
NetworkAIR Accessories
NetworkAIR AFX
NetworkAIR CM
NetworkAIR CW
NetworkAIR FM
NetworkAIR IR
NetworkAIR TC
Notebook Security
On Site Service
Open Frame Racks
Operations Capacity
Operations Change
Operations Energy Cost
Operations Energy Efficiency
Operations Insight
Operations Mobile
Operations VIZOR
Outdoor Enclosures
Panelmount Environmental Monitoring
Parallel
Patch Panels
PC1200
Planning Tools and Publications
Portable Cooling
Power Cords
Power Distribution Units
Power Generation Systems
Power Ready Notebook Cases
PowerChute Business Edition
PowerChute Inventory Manager
PowerChute Network Shutdown
PowerChute Personal Edition
PowerChute plus
PowerManager
PowerShield
Preventive Maintenance
Project Management Services
ProtectNet
Rack Air Distribution
Rack Components
Rack LCD Consoles
Rack PDU Accessories
Rack-mount Transfer Switches
Refrigerant Distribution
Remote Monitoring Services
Replacement Batteries
Replacement Notebook Batteries
Residential Hardwire Surge Suppression
Retail
Retractable Cables
Room Air Distribution
Room Cooling Accessories
Router Cables
Row Cooling Accessories
SCSI
Security Cameras
Sensors
Serial
Service Bypass Panel
Service Plans
Silcon
Silcon Accessories
Silcon Battery Systems
SLM/FLM Series
SmartSlot Expansion Chassis
Smart-UPS
Smart-UPS Accessories
Smart-UPS Battery Systems
Smart-UPS DP
Smart-UPS On-Line
Smart-UPS RT
Smart-UPS VT
Software Configuration
Software Education
Software for NetBotz Appliances
Software Installation
Software Integration
Spare Part Kits
Specialty Enclosures
Start-Up Service
Stationary Power Distribution Units
Step-Down Transformer
StruxureWare Central
StruxureWare Operations Suite
SurgeArrest Essential
SurgeArrest Home/Office
SurgeArrest Notebook
SurgeArrest Performance
Switch Boxes
Switched Rack PDU
Symmetra
Symmetra Accessories
Symmetra Battery Systems
Symmetra MW
Symmetra MW Accessories
Symmetra Power Module
Symmetra PX
Symmetra PX Accessories
Sync and Charge Cables
Thermal Containment
Thick and Thin Ethernet
Token Ring
Toploading Cases
Traditional Cases
Training Services
Transceivers
Transportation
Travel Mice
TSP Accessories
TSP Battery
TSP/Generator
TSP/Total System Power
Tune-UPS for Symmetra
Uniflair Chilled Water
Universal Mobile Device Batteries
Universal Notebook Batteries
Universal Notebook Power Adapter
Universal Power Accessories
Universal Power Adapters
UPS Network Hub Card
UPS Network Management Cards
USB Adapters & Converters
USB Cables
USB Charging Cables
USB Hubs
Wall-mount Transfer Switches
Wheeled Cases
Wireless
Wizards and Configurators
WS200