saddle conduit pvc 50mm

Fixing Accessories, PVC, Screwed Lock Rings, Saddles, 50mm

Catalogue Number: 261/50
saddle conduit pvc 50mm
Colour: Grey
Colour: Per UOM Std.
  • Electric Orange 1 PCE
  • Grey 1 PCE
  • Transparent 1 PCE
Added to cart

Specifications

hide show
Product brand
Clipsal
Range of product
Series 261
Diameter
50 mm
Fixing mode
by screws
Material
PVC (polyvinyl chloride)
Sheath material
plastic
Environmental characteristic
UV resistant
REACh Regulation
Free of Substances of Very High Concern above the threshold
REACh free of SVHC
Yes
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Yes
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)

Frequently Asked Questions

hide show

Can I get the 251/50 in orange?

No. Unfortunately, the 251/50 is the only one that comes in grey.

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=251/50



 

What size Clipsal saddles are available?

Size       Ctn Qty     Part Code
16mm    50             261/16
20mm   100            261/20
25mm   100            261/25
32mm    50             261/32
40mm    50             261/40
50mm    20             261/50

Is part number 242/50 suitable for underground?

Yes. Part number 242/50 is suitable for underground.

Is there a 246/50 in orange?

Yes we do but it is manfactured to order.

What is the part number for a 50mm female and 50mm male bush?

The part number for a 50mm female and 50mm male bush is - 281/50 & 281F50
For further information , visit link below:-
www.clipsal.com/Trade/search-results?q=281/50
https://www.clipsal.com/Trade/search-results?q=281F50
User-added image

 

What is the part number of the saddle spacer to suit 261/40, 40mm PVC saddle?

Unfortunately we do not have a saddle spacer to suit 261/40, 40mm PVC saddle.

How do i seal up a 50mm hole in the 230DRAVL?

Using parts 220S50-GY and 260/50-GY. Placethe 260/50 on the inside and the 220S50 on the out side place it in the hole and screw them together. This willl then seal the hole.

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=260/50
https://www.clipsal.com/Trade/Products/ProductDetail?catno=220S50
 
 
 

How many 261/16 Clipsal saddles are there in a carton?

There are 50 16mm saddles in a carton.

Note: This information can be found in your Clipsal pocketbook right next to the part code.

Do you have a cap/ flange to for 20mm conduit?

Yes the part number is 221/20

What are the part numbers of slip type expansion couplings?

Slip Type Expansion Couplings are available from 16mm through to 50mm.The part numbers of slip type expansion coupling are as follows:
16mm = 251/16
20mm = 251/20 *
25mm = 251/25 *
32mm = 251/32
40mm = 251/40 *
* = only available in Grey
Where long conduit runs are likely to be exposed to wide variations in temperature, it is recommended that expansion couplings be used at each join. It is not recommended that Slip Type Expansion Couplings be used where the conduit run is exposed to the weather. Standard colour is Grey (GY).
Dimension details are attached.
 

What is the password for the RSU software for micrologic trip units 5.2 6.2 5.3 6.3

Product Line:
Circuit Breakers
PowerPact H, J, L

Environment:
Software for micrologic trip units 5.2 6.2 5.3 6.3

Resolution:
The password is Schneider.
 

Are the Clipsal Conduit Clips available in Electric Orange?

No, they are only available in grey.

This applies to the 280/16 (16mm), 280/20 (20mm), 280/25 (25mm), 280/32 (32mm), 280/40 (40mm) and 280/50 (50mm).

Are the 265 series insulated boxes (suitable for numerous junctions and terminations) IP rated?

The 265 series is a range of IP56 rated insulated boxes suitable for numerous junctions and terminations. Each box is supplied with a 3mm sealing gasket.

This applies to the 265/1, 265/3, 265/4, 265/5, 265/7 and 265/7D.

What are the part numbers for the 25mm PVC saddles and spacers?

The part numbers are 261/25 for the saddles and 261S25 for the spacers. 

Some of the key features are:
  • 63mm Length x 20mm Width x 29mm Overall Height
  • 48mm Mounting Centre
For further information please visit https://www.clipsal.com/Trade/search-results?q=261/25



 

How to change the Schneider Electric company logo on Tenant Metering Software (TMS) 1.5 bills.

The Schneider Electric company logo can be changed to reflect the tenant billing company.
The logo is located at: C:\PowerLogic\TenantMetering\LOGO.jpg

The customer can modify this file or swap out thier own logo in this one's place.

Image Requirements

File name must be named LOGO.jpg
Image size* must be: Width = 211, Height = 50

*Any other image size will be expanded/condensed to 211x50 pixels.


Legacy KB System (APS) Data: RESL201466 V1.0, Originally authored by MaTh on 02/26/2010, Last Edited by MaTh on 02/26/2010
Related ranges: Tenant Metering Software

What are the dimensions for a 261S Saddle Spacer?

The dimensions for a 261S Saddle Spacer are 261S are:
 
Saddle Spacers
Catalogue Number Size Length (L) Width (W) Centres (CRS.) Standoff (T) Height (H)
261S16 16mm 55mm 21mm 32mm 8mm 14mm
261S20 20mm 61mm 22mm 40mm 8mm 14mm
261S25 25mm 74mm 26mm 48mm 8mm 14mm

Saddles Spacers set a conduit run off the wall 8mm to allow easier cleaning and repainting and to facilitate entry into equipment. They are available in sizes 16mm through 25mm.
Standard colour is Grey (GY), with Orange (EO) also available at extra cost.

For further information please visit www.clipsal.com/Trade/search-results?q=261S


 

Creating a CID file for an ION7550 or ION7650 meter using CET850 software

Issue

A CID file needs to be downloaded to ION 7650/7550 meter to make it available on the IEC 61850 network. This article explains how to create a .cid file using an existing .icd file. The .icd files are available and can be downloaded from external Powerlogic website.

Product Line

IED: Intelligent Electronic Device, a device with a microprocessor controller.

ICD: IED Capability Description, which is supplied by the vendor of the IED.

CID: Configured IED Description, which is an ICD that has been configured for a specific IED using IEC 61850 configuration software.

SCL: Substation Configuration Languages, such as ICD or CID.

SCD: Substation Configuration Description. An SCD file contains configuration data for the IEC 61850 system and the communication configuration settings for all related IEC 61850 devices.

Environment

CET850 Version 2.1.0

Resolution

1. File > New to open a new SCL file

2. Add > IED

The mandatory fields are:

- ICD / CID File
- Name
- Subnet




After accepting the changes, this should be seen:




3. File > Save and save with .scd extension




4. File > Build a CID File to create .cid file
________________________________________
Original article#
Date Created: October 5, 2010
Last Revised: October 5, 2010
Public
Original Author: FN
All content © 1992-2010 Schneider Electric


Legacy KB System (APS) Data: RESL203646 V1.0, Originally authored by LaAd on 10/06/2010, Last Edited by LaAd on 10/06/2010
Related ranges: ION7550/ION7650

CET850 User's Manual

Issue    
Need help understanding how the CET850 works.

Product Line  
CET850

Environment  
IEC 61850 communication

Resolution    
Attached is the user's manual for CET850.


 

"Feature set not compatible," error appears when uploading a template to an ION meter.

Issue
"Feature set not compatible," error appears when uploading a template to an ION meter. 

Product Line
ION7550, ION7650

Environment
ION Setup

Cause
Templates can only be uploaded if the modules in the template match those on the meter. The modules on the meter are determined by the firmware.
For example, if a customer changes from v371e firmware (with IEC 61850 implementation) to v371s firmware (without IEC 61850 implementation), they will be unable to upload their previous template.

Resolution
Install the default meter template (you will lose all existing configurations).
 

Can you configure ION Meters to accept multiple 61850 clients?

There are absolutely no settings that you can change in your ION Meter regarding number of accepted Client connections.

That is hardcoded in the meter's firmware, no matter which communication protocol is used to connect to the meter.


 

Does PowerSCADA Operation support communication with IEC 61850 devices based on Parallel Redundancy Protocol?

Applies to:
All PowerSCADA versions using IEC61850N driver, although it refers to the current PowerSCADA version at the moment of publishing.

Question:
Does PowerSCADA Operation support communication with IEC 61850 devices based on Parallel Redundancy Protocol?

Answer:
YES, PowerSCADA Operation 8.2 (PSO) supports communication with other IED nodes as defined by IEC 61850 standard, over a network that uses Parallel Redundancy Protocol (PRP) nodes as defined in the standard IEC 62439-3 (March 2016).
Implementing the IEC 61850 standard, PSO can communicate as a Client with any Server (IEDs) by using the native IEC61850N driver.
The IEC61850N communication driver uses MMS (Manufacturing Message Specification) which is an Application Layer protocol (7th, top layer of OSI model).
PRP is a Link Layer redundancy protocol (Layer 2 of OSI model), which allows higher layer network protocols to operate without modification.
This means that MMS protocol works without problems, further means that PowerSCADA Expert IEC61850N driver will work.
PRP implements redundancy in the nodes rather than in the network.
Thus, to connect a PowerSCADA Server node to such network, a Redundant Box (RedBox) device is needed.
For redundant PowerSCADA server nodes, a RedBox device is needed for each node.
This RedBox requirement should not be seen in any way as a limitation of PowerSCADA software, it is a hardware device that is needed to connect to such a redundant network.
 
Created on April, 11th 2018 by
Adrian Dicea
PowerSCADA Product Prime @ Expert Level - Global Technical Support

Are ION Meters Compatible with IEC 61850?

Issue
Are ION Meters Compatible with IEC 61850?

Product Line
ION7650, ION7550, ION8650, PM8000

Environment
IEC61850 protocol

Cause
Meter capable of IEC61850 protocol is needed

Resolution
An implementation of IEC 61850 protocol was released in late 2010. This implementation will be exclusive to the ION7650/7550, ION8650, and PM8000 series meters. Here are some basic features that of this implemtation:

The ION meter will provide via IEC 61850:
-1s operational metering data (V, I, PF, Power, Energy totals)
-Some power quality parameters (harmonics, symetrical components)
-Access to read and write meter digital & analog I/O
-Time synchronization via SNTP
-Reporting service for 61850 data with selectable report members
-File based setup and COMTRADE formatted waveform data (Digital Fault Recorder) via FTP
-Custom mapping of ION values into 61850 in addition to standard models
-Up to 4 independent client connections
-4 buffered and 20 unbuffered reports 50 members per dataset (max) each

 

Register List for ION7650 IEC61850 protocol

Issue
Register List for ION7650 IEC61850 protocol

Product Line
ION7650

Environment
61850 Template on the device.

Cause
No register list for the IEC61850 protocol comes with the device.

Resolution
The IEC61850 register listing is defined in the IEC61850 standard. It is a proprietary register list of IEC. Therefore we cannot distribute the register listing for the IEC61850. To obtain the register listing the IEC61850 article would need to be purchased from IEC. The IEC61850 article lists the register mapping.

Video: PM8000 series meter default ICD files for IEC61850

Issue
A user needs PM8000 series meter default ICD files for IEC61850 communication configuration

Product Line
PM8000 Series meter

Environment
ICD files for IEC61850 communications

Resolution
The default ICD configuration files for IEC61850 communications are attached to this article

See Video below on how to create and load the CID file needed to enable IEC 61850 functionality

 

Configuring GOOSE in MiCOM S1 Studio

Goals and Symptoms

The objective of this tutorial is to illustrate the configuration of basic GOOSE messaging on two Px4x series IEDs. Once the configuration is complete pressing Function Key 1 on one IED will send a GOOSE signal to the second relay and illuminate LED #1 on that relay. Also, pressing Function Key 1 on the second IED will send a GOOSE signal to the first IED and illuminate LED #1 on that IED. In other words, we will setup IED_1 to publish a GOOSE message which is linked to the state of itsFunction Key 1. Also, we will setup IED_1 to subscribe to the GOOSE message that is published by IED_2 and have that message turn on or off IED_1’s LED #1.

Causes and Fixes

Follow the instructions provided in the attached tutorial document: S1 Studio 61850 tutorial.pdf

G3200 using IEC61850 - How to detect if Modbus Slaves are offline

Goals and Symptoms

G3200 and PowerSCADA (or any IEC61850 Client Software): How to detect if the Modbus Slave is Offline to prevent invalid values?

Facts and Changes

Having G3200 Firmware v1.4, PM820 meter connected to G3200 over RS485 as a Modbus Slave, PowerSCADA (as IEC61850 Client) connected to G3200 on Ethernet port.
If the communication between the G3200 and the PM820 is broken, then the values (last values of the PM820) are still available over the G3200.
In this case, would be better to have all PM820 data become invalid or to have a way to trigger an alarm about this, wouldn't be?
Is there a possibility to change this in the CID file or in the G3200 firmware, or what is the solution?

Causes and Fixes

Current firmware implementation in G3200 doesn't support updating IEC 61850 data structure when the connected device (Modbus Slave) is offline.
PowerSCADA (or any other IEC61850 Client software) connected to G3200 should check the values of LLN0 and LPHD Logical Nodes under each Modbus Slave device defined in the CID file.
If It finds LLN0.ST.Mod = 5(OFF) then it should trigger an Advanced Alarm for that Modbus Slave device.

LLN0 and LPHD are the two logical nodes dedicated for physical device health and status.

Case1: When Modbus Slave device is "Online"
LPHD1.ST.PhyHealth = 1(OK)
LLN0.ST.Mod = 1(ON)

Case2: When Modbus Slave device is "Offline"
LPHD1.ST.PhyHealth = 3(Alarm)
LLN0.ST.Mod = 5(OFF)



G3200 updates the whole IEC 61850 data structure of the device if, and only if, the device is Online.
Then, it reads the data from device using Modbus functions and updates the IEC 61850 data structures.
If devices get disconnected, Measures, Quality and Timestamp won't be updated. However, the above mentioned nodes: "LPHD1.ST.PhyHealth" and "LLN0.ST.Mod" are updated and their values could serve as device status monitoring.

                                            
Created on 13th MAY 2013 by
Adrian Dicea
PowerSCADA Product Prime @ Expert Level - Global Technical Support

Related ranges: G3200, PowerSCADA, IEC61850, Modbus

What programs are used to configure IEC61850 for Sepam relays?

Issue
Customer needs to configure IEC61850 for Sepam

Product Line   
Sepam 80 series
Sepam 40 series

Environment    
Communication setup  

Resolution   
There are two different programs that can be used to program the IEC61850 configuration file for the SEPAM's
1. To build a simple configuration file use SFT2841.  To get SFT2841 download file just clear here.
2. To build a highly customized configuration file use CET850.  To get CET850 download file just clear here.

Which Sepam and Accessory ACE 850 does compatible with ?

Goals and Symptoms
Which Sepam and Accessory ACE 850 does compatible with ?
Causes and Fixes
The Accessory ACE 850 for having the TCP/IP communication in Modbus and IEC 61850 is compatible with 
the SEPAM 40 - SEPAM 60 - SEPAM 80

The wiring beetwen Sepam and ACE 850 has to be only done only with Blue cable CCA614 with reference

Key words and phrases: ACE850

AEDL3
 

Legacy KB System (APS) Data: RESL201113 V1.0, Originally authored by DaMi on 01/22/2010, Last Edited by DaMi on 01/22/2010
Related ranges: Sepam accessories, Sepam series 80

Does the PM8000 support BACnet protocol?

Product Line
PM8000

Environment
BACnet

Resolution
The PM8000 meters do not support BACnet protocol 

Please refer to page 18 of the following user manual to view the supported protocols:
https://www.schneider-electric.com/en/download/document/7EN02-0336/'

Supported protocols
The meter’s fundamental protocol and architecture is ION.
You can integrate the meter into various industry-standard networks. Data that the meter measures can be made available to other devices using Modbus, DNP 3.0 and SNMP as well as the MV-90 translation system. You can configure the meter to import data from other devices on these networks. The meter supports the IEC 61850 protocol and COMTRADE waveform data format.
The meter also supports IPv6, DPWS and RSTP Ethernet protocols.
 

What ION7550/ION7650 firmware downloads are available and what changed?

Issue
Where can I download ION7550/ION7650 firmware and what was updated?

Product Line
ION7550/ION7650

Environment
Firmware Download Links

Resolution
The table below lists the current and past firmware versions with associated download and What's New? document links:
Firmware Version ION7650 Firmware* ION7550 Firmware* What's New? Document Notes Release Date
V411 Download Download See Below Only compatible with -05 hardware July 2018
V410 Download Download Details Only compatible with -05 hardware March 2017
V401 Download Not Available Details Only compatible with -05 hardware March 2016
V400 Download Not Available Details Only compatible with -05 hardware Feb 2015
V375 Download Download See Below Use for -04 and older hardware July 2018
V374 Download Not Available Details   March 2016
V373 Download Download Details   Dec 2014
V371 Download Download See Below   June 2012
V366 Download Download See Below   Feb 2012
V360 Not Available Download Details    
V355 Not Available Not Available Details    
V350 Not Available Not Available Details    
V331 Not Available Not Available See Below    
V330 Not Available Not Available Details    
V321 Not Available Not Available Details    

*Older versions with 'Not Available' status may be requested from Technical Support if required.

Additional descriptions for firmware versions are as follows:


V411/375
No new features.
 
V410​
This firmware release supports EN50160:2010 (Edition 4) and IEC 61000 4-30 Edition 3. EN50160 is a European standard that defines the voltage characteristics of the electricity supplied by public distribution systems. The latest firmware version for this meter now supports the EN50160:2010 (Edition 4) standard. The IEC 61000-4-30 (4-30) standard defines methods for measurement and interpretation of power quality parameters in 50/60 Hz AC power supply systems. The standard describes measurement methods for relevant parameters to obtain reliable, repeatable and comparable results using any compliant meter. 
 
V400 
V400 is a general firmware release that adds support for new metering hardware. In addition this firmware release reduces the 7x50e and 7x50s variants into one allowing for IEC61850 and10Meg of logging memory to occur upon the same device. V400 adds compatibility for the -05 hardware revision option. This can be found as the last two digits of a meters serial number. V400 will NOT be compatible with previous versions of hardware ( -04 or earlier). In addition previous firmware revisions (pre V400) will not be compatible with the -05 hardware. We have consolidated the e (IEC61850) and s (standard) variants into one release. This means ALL devices ordered with V400 will now contain IEC61850 functionality as well as contain the 10M logging memory. Both features can be implemented in frameworks simultaneously. NOTE: To support the new features in v400, download the latest version of ION Setup from the website. 
 
V401/374
*The V374s version is the standard version. *The V374e version is for IEC61850 protocol support. This firmware is for the older hardware platform (RevA, if you like). The equivalent firmware for the RevB hardware platform is V401.
 
V373​
Firmware V373 is a general firmware release that adds support for the following features: (1) Access to more voltage data (2) Enhanced interharmonic distortion calculation (3) Display module enhancements (4) initial release of the PowerLogic Remote Display and also includes security enhancements. NOTE: For more detailed information about any of these features, please find the document entitled "What’s new in ION7550/ION7650 v373" (7EN12-0276-00). In preparation for upgrading your meter's firmware please download the latest firmware version (.upg file) and the appropriate Meter Template (.dcf file). Note that releases of Meter Template files often do not keep pace with firmware releases so do not be concerned if the firmware version number in the label of latest available template file is not as high as the version number of the firmware file. The main thing is to get the latest available file for each of firmware and template. ION Setup (freeware utility) is the recommended tool for the firmware upgrade process. See the Upgrading ION Device Firmware technical note for complete details.
Important Notes: *Generally, two versions of firmware are available for the ION7x50 devices: VXXXe with IEC 61850 implementation, and; VXXXs without IEC 61850 implementation. *IEC61850 is supported with the consequence of a reduction of the available logging memory. If you upgrade a 10MB meter to use IEC 61850 firmware, the meter’s logging memory will be reduced to 5MB. If the meter is subsequently loaded with non-IEC 61850 firmware, the meter’s original logging memory will be restored.  

 
V371​
Firmware V371 is a general firmware release that adds support for the initial release of the PowerLogic Remote Display and also includes security enhancements. In preparation for upgrading your meter's firmware please download the latest firmware version (.upg file) and the appropriate Meter Template (.dcf file). ION Setup (freeware utility) is the recommended tool for the firmware upgrade process. See the Upgrading ION Device Firmware technical note for complete details.
Important Notes: *Two versions of firmware are available below namely: V371e with IEC 61850 implementation, and;V371s without IEC 61850 implementation. *IEC61850 is supported with the consequence of a reduction of the available logging memory. If you upgrade a 10MB meter to use IEC 61850 firmware (7650V360e), the meter’s logging memory will be reduced to 5MB. If the meter is subsequently loaded with non-IEC 61850 firmware (7650V360s), the meter’s original logging memory will be restored. 
 
V366
Firmware version 366 (V366) for the ION7x50 adds Modbus mastering over TCP support for up to 10 connections. This is in addition to the 8 available Ethernet connections and is also in addition to the Modbus master functionality in both serial ports. This release also includes various communications bug fixes. When upgrading your meter's firmware please download the latest firmware version (.upg file) and the equivalent Meter Template (.dcf file). You can upgrade meter firmware using ION Setup or ION Enterprise. See the Upgrading ION Device Firmware technical note for complete details
Important Notes from V360 (applicable to V366): * Two versions of V360 firmware are available below: with IEC 61850 implementation (7x50V360e) and without IEC 61850 implementation (7x50V360s). * IEC 61850 can only be purchased on 5MB meters, not 10MB meters. If you upgrade a 10MB meter to use IEC 61850 firmware (7x50V360e), the meter’s logging memory will be reduced to 5MB. If the meter is subsequently loaded with non-IEC 61850 firmware (7x50V360s), the meter’s original logging memory will be restored.* The non IEC 61850 firmware version (7x50V360s) still has new features available, such as COMTRADE waveform recording.* To find ICD files related to the IEC61850 implementation on ION7x50 meters, search the keyword icd on any schneider-electric.xxx site 
 
V360
Firmware version 360 (v360) for the ION7550/ION7650 adds IEC 61850 server functionality. This includes FTP support and the ability to save waveform data in COMTRADE format.
 
V355
Firmware version 355 (v355) and factory template 7550/7650_v355_FACPQ_V3.4.0.0.0 for the ION7550 / ION7650 adds International Electrotechnical Commission (IEC) 61000-4-30 Class A Edition 2 standard compliance for the ION7550 / ION7650 and the ability to configure the event priority value for digital input state change events.
 
V350
Firmware version 350 (v350) for the ION7550 / ION7650 adds a number of new features as well as support for the new Communications Card.
New features
  • Disturbance Direction Detection capabilities are now available.
  • Localization options have been added to the meter, including:
    • the ability to set the language of the front panel display to English, Spanish, French or Russian.
    • the option to customized IEEE/IEC convention settings.
  • Setpoint learning functionality has been added. 
  • The meter can function as a Modbus gateway, forwarding Modbus packets from a master through the meter to downstream serial devices.
  • Trending and Forecasting functionality has been added.
  • The meter can now communicate selected values over the Ethernet via SNMP.
  • Support for a new communications card has been added.
  • A default IP Address has been added. For more information on these features, see the relevant sections in this document.
Other changes
  • Power Availability has been removed from the default template.
  • V4, I4, I5 waveform recorders have been removed from the default template.
  • Thermal Demand has been removed from the default template.
 
V331​
Firmware version 331 (v331) for the ION7550/ION7650 meter improves Class A compliance with the IEC 61000-4-30 (2003 - 1st Edition), or “4-30” power quality standard. Compliance improvements included are Class A Flicker with no exceptions
 
V330
Firmware version 330 (v330) for the ION7550 / ION7650 meter supports Class A compliance with the IEC 61000‐4‐30 (2003 ‐ 1st Edition), or “4‐30” power quality standard.
 
V321
Firmware version 321 features enhanced Modbus Mastering with four ION modules new to the ION 7550 /ION 7650 platform. The Modbus Master Device and Modbus Master Mapping modules work together to offer improved setup of Modbus read functionality. The Averaging module provides simple averaging and easily links with other Modbus modules. The Modbus Master Options module allows multiple serial connections to different loops of Modbus devices.
Advanced meter security provides an additional layer of security, allowing you to configure up to 16 users, each with unique access rights to the meter. Access rights consist of different security levels, permitting different users to read values, perform resets, time sync the meter clock, or configure meter settings.

What can SFT2841 be used for in a standard IEC61850 configuration?

Product Line   
SFT2841

Environment   
Software

Resolution   
STF2841 can be used for the following:
1. Get information from the SEPAM and ECI850 connected to the IEC61850 network. This can be done manually by keying the SEPAM description or automatically by using SFT2841 to poll the network to locate connected devices.
2. Extract ICD files from the library to build a configuration based on the SEPAM description.
3. Build a CID file as a result of the configuration for each SEPAM or ECI850 connected to the IEC61850 network. For an ECI850, it contains the configuration of all the SEPAM connected to the ECI850.
4. Generate an SCD file for use by other IEC61850 configuration tools. It contains the configuration of all SEPAM and ECI850 connected to the IEC61850 network.
5. Import a CID file into SFT2841 to modify it: for example to add or remove a SEPAM in the IEC61850 network topology.
6. Download a CID file into SEPAM or ECI850 with SFT2841.

 

What are some major differences between ION8600 and ION8650 meters?

Issue:
Customer wants to know the major differences between the obsoleted ION8600 meter and its replacement ION8650 meter

Product Line:
ION8600
ION8650

Environment:
meter comparison

Resolution:
1. ION 8650 has high accuracy, single current range (2 times more accurate than existing ANSI/IEC Class 0.2 standards from 0.010A-20A) whereas ION8600 has 0.2 accuracy class (IEC, ANSI).
2. ION 8650 has 1024 samples/cycle waveform capture for all voltage and current channels whereas ION 8600 has 256 samples / cycle waveform capture.
3. Increased onboard memory ION8650A/B/C (128Mb/64Mb/32Mb)whereas for ION8600A/B/C (10Mb/4Mb/2Mb).
4. IEC 61850 is not available as a protocol on ION8600.
5. ION8650 has the option to have Cellular Modem communication through Verizon. More information about Cellular Modem communication can be found in FA277446.

Video: How to Create and Load IEC61850 configuration files into ION meters

Product line
ION Meters
IEC61850

Environment
Firmware

Resolution
Implementing IEC61850 protocol requires CET850, which uses the ICD file specified and creates a CID file. It is this CID file which is then uploaded to the meter via FTP. Please see page 12 of IEC 61850 and ION Technology, and the attached SFT Common libraries and detailed instructions on how to load the CID files into ION meters.

Also, see FA212490 for creating a CID file for an ION7550/7650 using CET850.

Download CET850 from the Schneider Electric site (This CET850 IEC61850 configuration tool replaces the previous tool called SFT850 software, therefore it works with Sepam IEC61850 protocol as well).

PowerSCADA Expert 8.2 Update 5 - Release Notes

Issue
What is new in PSE8.2 and a detailed listing of resolved problems and minor enhancements.

Product Line
PowerSCADA Expert 8.2 (PSE8.2)

Environment
Installer
 
Cause
A new PSE8.2 cumulative update release.

Resolution
PowerSCADA Expert 8.2 Update 5 - Release Notes
Release Notification (Updated 25 April 2018)

This is a detailed listing of resolved issues and minor enhancements in this release.

 


 

Prerequisite

You must have PowerSCADA 8.2 installed prior to installing this update. No previous updates are required.

Cybersecurity Announcement

Floating License Manager v2.1 addresses vulnerabilities in the Flexera FlexNet Publisher component detailed in CVE-2016-10395, CVE-2017-5571 and CVE-2016-2177. Uninstall the current version of the Floating License Manager, and then install version 2.1.
NOTE: The Floating License Manager v2.1 installer is included with this hotfix release but is not a part of the hotfix installer. Unzip "Floating License Manager v2.1.zip" and run "setup.exe".

Important Notice: There is a known issue with the Floating License Manager v2.1.0.0 installer. When installing with a logged-in Windows User name containing a space, the install will not succeed. The workaround is to install the Floating License Manager with a user that does not include a space character in their name.

Bug Fixes and Enhancements

TFS 21482 - AlarmEvents with a state of normal returned in GetAlarmEvents response for EWS

GetAlarmEvents was changed to not return alarms in the normal state.

TFS 21483 - Incorrect timestamp information provided for AlarmEvents not in the Active state

Alarm timestamps are now updated to reflect the true timestamp of occurrence for all state changes (active, drop out, acknowledge).

TFS 21484 - Unable to filter AlarmEvents by Type using EWS

Alarms are now filtered based on type. 

TFS 21485 - Unable to successfully acknowledge alarms using EWS

In some situations, EWS would not acknowledge alarms correctly.  This behavior has been fixed.

TFS 21486 - Unable to filter alarms using the PriorityTo and PriorityFrom fields

EWS did not observe the priority field correctly. This has been addressed and the minimum allowable priority has been set to 1 (to exclude non-alarm objects in the PowerSCADA alarm database).

TFS 21557 - PowerSCADA projects - including the starter project, PLS_Include, and PLS_Example - need to be upgraded to support the new DBF schemas

PowerSCADA projects have been upgraded to the latest DBF schemas.  If there are existing projects created from the starter project, set [CtEdit] Upgrade = 1 in the Citect.ini file using the Setup Editor, and then restart PowerSCADA Studio.

TFS 21564 - Alarm Proxy does not show the analog alarm states

Alarm Proxy now reports the analog alarm states (HIGH HIGH, HIGH, LOW, LOW LOW) instead of ON / OFF.

TFS 21566 - If a CSV file that does not exist is selected in the I/O Device Manager, the application throws a runtime exception

 

A message is displayed indicating that the file does not exist.

 

TFS 21569 - On large systems with 200k configured alarms, the GetAlarmDefinitions call in Alarm Proxy is slow and causes ENM to timeout

Performance issue in alarm proxy has been resolved.

TFS 21649 - When CoreServiceHost adds and removes devices, it may lose the original IDs

CoreServiceHost now keeps a device chronicle.  When the device is removed and then later added, the ID will remain the same.

TFS 21913 - If the equipment name is changed in the system, but the I/O Device name is unchanged, CoreServiceHost will not refresh the equipment name

CoreServiceHost now properly updates the equipment on name change.

TFS 21935 - Logs that are too large for the Windows Event Log do not get logged properly

Large logs are now broken down into smaller log entries.

TFS 21970 - Profile Wizard and Automation does not support IPv6

Profile Wizard and Automation now supports IPv6 for TCP/IP Board level drivers.  This requires the TCP/IP Driver version 4.0.0.0 or later.

TFS 21975 - Open and Close buttons are disabled at runtime on equipment popup when separate digital tags are used for commands

The form now enables the command buttons if the Pos_On or Pos_Off tags are defined.

TFS 21979 - Alarm Proxy cannot return alarms that transition to inactive

This setting is now configurable in the Application Configuration Utility.

TFS 22043 - Single sign-on calls from a remote thick client do not work

Single sign-on now detects remote clients.

TFS 22060 - The I/O Device Manager cannot bulk import devices with device names greater than 16 characters

The I/O Device Manager now reads the device name length from the equipment.profiles file for proper validation.

TFS 22066 - Wonderware ArchestrA Logger Security Patch

Wonderware ArchestrA Logger Patch 2017.517.2328.1 is applied.

TFS 22150 - Alarm filters do not work on some resolutions

Alarm filter AN numbers are fixed for all alarm page resolutions.

TFS 22155 - Alarm filters perform exact matching

The alarm filter screen allows the user to select the filtering mode. The default setting is read from the INI file [Alarm] FilterMode.  0 (default) = Exact Match, 1 = Starts With, 2 = Ends With, 3 = Contains.

TFS 22306 - The equipment tree used on alarm pages is slow to render over the web client

Any page using the equipment tree should set the default library and symbol on the equipment tree genie, or set 'Hide Symbol Icons' to 'TRUE' if a default icon is not available.

TFS 22401 - Alarm filter and equipment tree filter operate independently

The alarm filter and equipment tree filter operate together to filter the alarm tables.

TFS 22896 - Core service host logs two warnings during shutdown - exception thrown during disposal.

 

Cleanup methods were reworked to prevent the exception.

 

TFS 22898 - EWS cannot obtain tag updates at a 5 second rate

EWS and core services were updated to obtain data at a 5 second poll rate.

TFS 23262 - Equipment popup alarm table does not acknowledge or disable alarms

Alarms can now be acknowledged or disabled in the equipment page.

TFS 23274 - Equipment.profiles cannot be imported into the Profile Editor in cases where the original Device Types and Device Profiles were lost

The Profile Editor can import the equipment.profiles file to generate device types, device profiles, and tags.

TFS 23437 - Citect 2016 Updates

 

Citect 2016 Update (April 10, 2018) is included with this update.

Project ID management was removed from Citect 2016.  Project IDs are now located in the ProjectInfo.xml file. 

MinUnitNumber and MaxUnitNumber (previously stored in UnitNumberRange.xml) have also been migrated to ProjectInfo.xml.

 

TFS 23637 - The Alarm Summary page does not display state information

The Alarm Summary page now displays the state that caused the alarm.

TFS 23650 - 8.2 install does not enable ASP feature within IIS

The installer now enables the ASP feature under IIS. This server role feature is required to run the Citect web control client. (Previously the View-Only web client was the only option for web deployment.)

TFS 24205 - When Core Services receives a timeout from the Client, alarm processing may halt until the service is restarted

Core Services properly recovers from a ctApi deadlock condition.

Files Modified

Applications\AppServices\bin\Framework.dll
Applications\AppServices\bin\Framework.ServiceHost.exe
Applications\AppServices\bin\Modules.CoreServices.dll
Applications\AppServices\bin\PowerLogic.Cipher.dll
Applications\AppServices\bin\Modules.ProviderBase.dll
Applications\AppServices\bin\Modules.ProviderEngine.TestHarness.exe
Applications\AppServices\bin\ObjectFactoryTools.exe
Applications\AppServices\bin\ProviderGatewayProviders.dll
Applications\AppServices\bin\PowerSCADA.Common.dll
Applications\AppServices\bin\Modules.Platform.Citect.dll
Applications\EWS\bin\Framework.dll
Applications\EWS\bin\EWS.dll
Applications\EWS\Web.config
Applications\EWS\DataExchange.svc
bin\de\ProfileEngine.resources.dll
bin\de\ProfileWizard.resources.dll
bin\de\WizardLibrary.resources.dll
bin\es\ProfileEngine.resources.dll
bin\es\ProfileWizard.resources.dll
bin\es\WizardLibrary.resources.dll
bin\fr\ProfileEngine.resources.dll
bin\fr\ProfileWizard.resources.dll
bin\fr\WizardLibrary.resources.dll
bin\it\ProfileEngine.resources.dll
bin\it\ProfileWizard.resources.dll
bin\it\WizardLibrary.resources.dll
bin\ja\ProfileEngine.resources.dll
bin\ja\ProfileWizard.resources.dll
bin\ja\WizardLibrary.resources.dll
bin\ko\ProfileEngine.resources.dll
bin\ko\ProfileWizard.resources.dll
bin\ko\WizardLibrary.resources.dll
bin\ru\ProfileEngine.resources.dll
bin\ru\ProfileWizard.resources.dll
bin\ru\WizardLibrary.resources.dll
bin\zh-chs\ProfileEngine.resources.dll
bin\zh-chs\ProfileWizard.resources.dll
bin\zh-chs\WizardLibrary.resources.dll
bin\zh-cht\ProfileEngine.resources.dll
bin\zh-cht\ProfileWizard.resources.dll
bin\zh-cht\WizardLibrary.resources.dll
bin\ProfileAutomation.dll
bin\ProfileEngine.dll
bin\ProfileWizard.exe
bin\WizardLibrary.dll
bin\ProfileAutomationUtility.exe
bin\CommsMethodProperties.xml
bin\DeviceManagementUserControlLibrary.dll
Applications\Profile Editor\Tags.xml
Applications\Profile Editor\ProfileEditor.Business.dll
Applications\Profile Editor\ProfileEditor.exe
Applications\Profile Editor\ProfileEditor.UserControls.dll
Applications\Profile Editor\Resources\ProfileEditor.UserControls.resources
User\PLS_Include\*
User\PLS_Example\*
Starter\Default_Starter.ctz

Installation

Unzip "PowerSCADA Expert 8.2 Update 5.zip" and run "PowerSCADA Expert 8.2 Update 5.exe".

ION Setup Revision History and Features & Fixes

Issue
The ION Setup revision history may be required.

Product Line
ION Setup

Environment
ION Setup

Resolution
Please see the table below for the revision history. 
To obtain the latest version of ION Setup software, refer to article FA212816 - Where can I download the latest version of ION Setup Software?
 
Release Date Version File Name Bug Fixes New Features
6/21/2013 ION 3.0 Build 13172 IONSETUP30_B13172_01.EXE
- CM3/CM4 Alarm log programming to a depth of 0
- PM53xx Meter Resets and other various setup problems with Ashoka devices
- Removal of PM5560 Remapping setup
- Bug fix for Harmonics/Phasor Viewer Real-Time display
- Communication statistic resetting for scripting mode
- Preliminary PM8000 Setup Assistant support
7/26/2013 ION 3.0 Build 13207.02 IONSETUP30_B13207_02.EXE
- Momentum PLC bug fix for data log configuration issue
- Corruption of DEVINFO.DAT file for certain device types when saved
- PM5560 Input Metering configuration issues resolved
- Momentum PLC configuration report
- PM8K Input Metering Prototype (not fully functional yet)
11/13/2013 ION 3.0 Build 13200.03 IONSETUP30_B13200_03.EXE
- Momentum PLC TOC table incorrectly being configured
- CM4xxxx Meter Configuration report hanging due to addition of Alarm Log configuration
- Fixed crashing when viewing waveforms for ION devices with more than 20 waveform modules (PM8K)
- Prototype of an Advanced Security Password Updater (mass update for password of Super-users)
- PM8K Incremental/Conditional Energy + Security Configuration Profiles.
-PM8K RMD Upgrades
- Changes to Scripting to prevent further processing of requests when unable to communicate
11/14/2013  ION 3.0 Build 13318.02 IONSETUP30_B13318_02.EXE - CM3/CM4 Meter Configuration report hanging on added Min/Max/Avg & Sequence of Event log setups
- MV-90 Master file Bug fixes for new xi 3.0 format
- Bug fix for template saving for PM8K with large number of inputs for new Data Mapping modules
 
- Device Scan detection for various new MicroLogic Circuit Breakers and new VEGA ULP gateway.
- PM8k Input Metering/ Conditional Energy Setup Assistant for latest framework/ firmware
- Various improvements for Site Comm Testing & Circuit Breaker Status reports
11/22/2013 ION 3.0 Build 13326.01 IONSETUP30_B13326_01.EXE - CM3/CM4 Meter Configuration not displaying correct setup values for additional data log configurations.
- Bug fix for module deletion for PM8K with large number of inputs for new Data Mapping modules.
- Improvements for Device Scan/Comm Testing/Circuit Breaker Status report feature.
- PM8K Conditional Energy/Input Metering setup assistant and displaying of associated values using Normal Mode verification.
- Bug fix for PLC Clock display issue not displaying correct date/time.
 
 02/06/2014  ION 3.0 Build 14037.02  IONSETUP30_B14037_02.EXE  - Fixed PM6xx Setup screen issues.
- Fixed issue with certain custom setup assistant text being too long.
- Fixed PM8000 Wiring display to reference new HME modules for phase & magnitude instead of Harmonic modules
 - Added setup files for CM2050/CM2150/CM2250.
- Added Flex Channel Assignment for BCPM and support for Veris ASCII representation of the labels
- Increased number of supported sites from present 128 to 256 to allow for large PME systems
- Added support for new PM8000 Custom Display setup wizard
- Modified PM5560 TIme of Use wizard to differentiate between time periods separately from the date range properly
02/21/2014 ION 3.0 Build 14052.02 IONSETUP30_B14052_02.EXE - Fixed issue with stop and hold setup option. - Added FileMode setup options for all PM8/CM data log configurations.
-Enhanced ULP IO Status reporting.
- Working on multi module creation and partial FWN support.
03/18/2014 ION 3.0 Build 14077.03 IONSETUP30_B14077_03.EXE -  Fixes for extended ASCII characters in template pastes.
-  Fixed issues with Modbus Alarm template pasting.
-  Support for new device features for BCPM/EM72XX latest firmware.
04/04/2014 ION 3.0 Build 14094.02 IONSETUP30_B14094_02.EXE -  fixes for E5600 configuration and data log uploads via Modbus
-  Fixed Site scanning and site comm testing issues
-  Fixed M3xxx data log uploads issue
 
04/17/2014 ION 3.0 Build 14107.01 IONSETUP30_B14107_01.EXE   -  Added new setup files for latest BCPM firmware
-  changes to programming for Advanced ION security hiding entered passwords and reporting of passwords via the Advanced Password updater.
05/09/2014 ION 3.0 Build 14129.01 IONSETUP30_B14129_01.EXE -  Fixes for iEM3/PM3xxx setup issues with latest released firmware. -  Improvements to site comm testing, circuit breaker status reports.
05/21/2014 ION 3.0 Build 14135.02 IONSETUP30_B14135_02.EXE -  fixes for iEM3/PM3xxx release firmware changes affecting all setup screens.
-  fix for EM7xxx energy real-time viewer for UINT64 registers.
 
05/30/2014 ION 3.0 Build 14150.02 IONSETUP30_B14150_02.EXE -  Fix issues with template pasting for PM/CM devices for data logs/alarms not programming properly.  -  Added trip unit door status for circuit breaker status report.
06/04/2014 ION 3.0 Build 14155.03 IONSETUP30_B14155_03.EXE -  fixes issue with pasting Alarm Log via Template function incorrectly setting the file number instead of the enable/disable setting.  
06/23/2014 ION 3.0 Build 14174.02 IONSETUP30_B14174_02.EXE -  Fixed PM6xx data log setup -  added PM6xx setup reporting
-  active comm port indication
-  EM1220 support.
07/04/2014 ION 3.0 Build 14185.01 IONSETUP30_B14185_01.EXE -  Fixed PM6xx data log configuration issue
-  fix for PM8 billing log interval not being stored in templates.
-  added PM6xx meter config reporting.
-  Preliminary PM8K Optional I/O setup assistant.
07/11/2014 ION 3.0 Build 14192.02 IONSETUP30_B14192_02.EXE -  Fixed issues with PM6 log setup with invalid memory allocation by adding new viewable memory allocation.  
-  Fixed issue with Micrologic incorrectly displaying wrong device type during scan insertion.
-  Fixed issue with ION parsing of event time quality requests.
-  Fixed issue during log upload to retry if Slave Busy response is received from Modbus gateway.
-  Added missing 73xx Ethernet settings to setup assistant. 
 
07/15/2014 ION 3.0 Build 14196.03 IONSETUP30_B14196_03.EXE -  fixes for MicroLogic breaker device type detection
-  fix for PM5561/PM5563 CT settings when not using 4th CT
-  added support for optional digital input alarms for PM8K.
08/08/2014 ION 3.0 Build 14220.02 IONSETUP30_B14220_02.EXE -  fixes for device scan test, waveform chart guide info update & header resizing
-  fixes for PM5xxx data log upload issue, CM2xxx report saving, ION86xx verification display issue
-  PM8K Setup Assistant changes
 
-  Changes for Script mode to support multiple file
-  Multiple monitor support
-  Resizable ION module dialogs
-  Support for additional advanced security users
09/10/2014 ION 3.0 Build 14253.01 IONSETUP30_B14253_01.EXE -  Improved Setup Assistant Time Sync functionality
- Security Wizard enhancements for new protocol control registers
-  fixes for charting, added more variable sizing of setup dialogs
-  CM4000T fix for Transient alarm
-  PM8K Option Card Reset pulse moved to new register
 
 
09/11/2014 ION 3.0 Build 14254.01 IONSETUP30_B14254_01.EXE -  fix for table event viewers for ION meters not displaying Event Log information properly.  
09/12/2014 ION 3.0 Build 14255.01 IONSETUP30_B14255_01.EXE -  fix for all table log viewers which were having issues showing date/time column due to some changes for upcoming features.  
10/17/2014 ION 3.0 Build 14290.03 IONSETUP30_B14290_03.EXE -  Fixes various event viewer issues
-   various fixes for scripting
-  added new protocol control setup assistant tab for PM8K/8650 if supported, syslog, event reader settings, new security assistant changes
10/31/2014 ION 3.0 Build 14304.02 IONSETUP30_B14304_02.EXE -    Various fixes along with support for new PM8K/8650v2 security changes. -  Brand new installer based on standard =S= software one.
-  Added preliminary support for Modbus/DNP mapping files.
11/14/2014 ION 3.0 Build 14318.01 IONSETUP30_B14318_01.EXE -  fixes for PM8 energy registers displaying incorrectly for large values
-  fixed  issues for Modbus/DNP map file function, support for new PM55xx changes, new IFE model type
 
-  preliminary support for new EM64xx and ION7400 devices.
11/24/2014 ION 3.0 Build 14328.01 IONSETUP30_B14328_01.EXE   -  Added Conzerv EM64xx, ION7400, 8650V2, PM55xx Phase 2 support
12/11/2014 ION 3.0 Build 14339.01 IONSETUP30_B14339_01.EXE -  fix for incorrect IEEE float32 format for data logs
-  fix for invalid CID value crash
-  changes to PM55xx new advance serial features
-  Change to add additional overflow parameters (WhE & VARhE) to all EM64xx setup files
-  Final changes to allow for script inter-process messaging
-  Changes to PM55xx setup files for new Advanced serial settings
-  Change to Test Reset action to more appropriate dialog title and shorter timeout
-  Installer changes to better detect OS and bootstrapper warnings

 
 
1/8/2015 ION 3.0 Build 15008.01 IONSetup v3.0.15008.01.exe - Changes to Register Map file to fix issue with all negative Power Factor readings in all PM7/PM8/CM PowerLogic series of devices. - Code added to support old PowerLogic Power Factor 16 bit format.
- Changes to add AddOn validation settings, ability to cancel unlinking/loading for Load Profile changes when warning is shown plus preliminary changes to add inter-application socket connections
1/22/2015 ION 3.0 Build 15022.02 IONSetup v3.0.15022.02.exe - Bug fix when viewing unassigned group with both sites & groups shown. - Changes to Circuit breaker status reports
- Changes to MicroLogic/ULP folder structure
2/4/2015 ION 3.0 Build 15035.01 IONSetup v3.0.15035.01.exe - Bug fix for system crash when network/device files mismatch.  - Added 8650 Cellular Modem setup options
- Support for site names beginning with a digit
2/19/2015 ION 3.0 Build 15050.01 IONSetup v3.0.15050.01.exe - Bug fixes for PM5xxx device scanning and MV-90 Master file report for new PM8K. - Added Device Tester User and associated multiple gateway building plus scanning.
- New 8650C cellular port enabling if equipped.
2/27/2015 ION 3.0 Build 15058.01 IONSetup v3.0.15058.01.exe   - Added 8650 Cellular network IP setup wizard
- Additional PQ PM8K template string to PWRMLIST.CFG
3/13/2015 ION 3.0 Build 15072.02 IONSetup v3.0.15072.02.exe - Bug fix for ION7400 manager info not being read properly and better error handling when creating modules by name.
- Bug fix for FWN paste issue using non-RMP downloading.
- Added support for PM556X FTP firmware upgrade
4/10/2015 ION 3.0 Build 15100.01 IONSetup v3.0.15100.01.exe - Fixed issue with MicroLogic breakers attached via IFM. - Added support for 8650 V420 and new cellular modem option.
- Added support for IEEE 5-19 template for ION7650 and PM8000 .
- Expanded Advanced Security updater to support up to 50 users and front panel password.
- Added iEM2100 Modbus folder to view real-time information. 
4/17/2015 ION 3.0 Build 15107.01 IONSetup v3.0.15107.01.exe - Bug fixes for circuit breaker/IO reports for IFM connected breakers
- PowerLogic Save Template function not working properly after introducing Save Options root folder
- CM2xxx waveform setup crashing
- Additional work done on supporting upgrades for PowerLogic Modbus upgrading
 
4/24/2015 ION 3.0 Build 15114.03 IONSetup v3.0.15114.03.exe - Bug fixes for device cloning using drag & drop, not listing Circuit Breaker status for only IFE on a site
- Added missing EM3555 files from new installer
- Progress added for PowerLogic FWB upgrade process
 
4/27/2015 ION 3.0 Build 1517702 IONSetup v3.0.15117.02.exe   - Added System Communication Test option. 
5/1/2015 ION 3.0 Build 15121.02 IONSetup v3.0.15121.02.exe - Fixed issues with EM6400NG setup options and semaphore issues. 
- Bug fix for not listing all MicroLogic breakers for system status display. 
- Changed Circuit Breaker Status to a System only option.
- Added System Builder prompt for Device Tester users
5/20/2015 ION 3.0 Build 15140.02 IONSetup v3.0.15140.02.exe - Added missing PM2XXX and EM6400NG setup files to installer
- Fixed issue with ION7400 Data Recorder view missing headings
- Added missing PM8000 IEEE 5-19 template folder to installer
- Fixed Global System Communication test crashing issue
- Added Calibration Wizard support for ION7550/7650/8800
- Standardized Advanced ION Security password programming and validation
- Added new firmware build number for firmware upgrade validation check
- Added check to prevent constant serial port initialization for USB issues 
5/29/2015 ION 3.0 Build 15149.01 IONSetup v3.0.15149.01.exe - Fixed issue with EM6400NG/PM2000 Setup options, IFE/TCP detection
- Fixed serial port issues introduced in recent builds
- Incorrect interpretation of regional settings when period is grouping digit symbol.
- Fixed issue with meter comparison report and TOU setup register
- Added ION7400 additional comm settings via assistant
- US Template/Options integration into main installation.
- Standardization of Advanced security password entry/programming.
6/2/2015 ION 3.0 Build 15153.01 IONSetup v3.0.15153.01.exe - Fixed communication issues due to changes for USB port detection  
6/17/2015 ION 3.0 Build 15168.01 IONSetup v3.0.15168.01.exe - Bug fix for serial port issues - Changes to display editor for new ION7400.
- Changes to EM6400NG/PM2xxx setup files to match present firmware changes. 
6/26/2015 ION 3.0 Build 15177.01 IONSetup v3.0.15177.01.exe - Fixes issue with detecting breakers equipped with IFM Comm modules. - Added preliminary new Enercept support files and device detection.
- Added configurable energy pulsing for ION7550/ION7650 via Setup Assistant.
- Updated Display Setup Assistant wizard to support new ION7400.
7/10/2015 ION 3.0 Build 15191.01 IONSetup v3.0.15191.01.exe - Fixed LED Pulsing Setup for EM6400NG/PM2xxx. - Added support for 12/18 CT versions of BCPM.
- Preliminary auto ION device detection for device testing.
- Standardization for Advanced Security Logon/Passwords.
- Added configurable input for 7650/PM8K Energy Pulsing output
7/24/2015 ION 3.0 Build 15205.01 IONSetup v3.0.15205.01.exe - Fixed issues with auto ION device insertion for PM8K, serial port reporting unavailable when editing, reporting issues during USB upgrades, DGD uploading using 8650 V420, IEEE 5-19 bug fix, Detection of old IFE f/w. - Added device notes which show via tooltips, configurable D4 energy pulsing output for ION7550/ION7650 latest framework.
8/14/2015 ION 3.0 Build 15226.01 IONSetup v3.0.15226.01.exe - Fixed issue with missing TRV-identified ML breakers. - Added preliminary new PDM-based Modbus Slave setup wizard.
- Added support for Access 9410. 
8/21/2015 ION 3.0 Build 15233.01 IONSetup v3.0.15233.01.exe - Bug fixes for ACCESS 9410 firmware upgrade, PM8000/ION7400 Setup Assistant Display Editor, 4720 ACM crashing on certain Min/Max viewers, using different regional settings different than North American standard.  - Added ION7400 LED Pulsing options to Setup Assistant.
- New Modbus Slave wizard support new PDM equipped devices.
- Preliminary support for new iEM34xx/35xx devices.
8/28/2015 ION 3.0 Build 15240.01 IONSetup v3.0.15240.01.exe - Bug fixes for Siemens 9410 template paste, DGD Log extraction issue for PM8K platform, ION7400 Display editor. - Added support for ECC Web Enable/Disable.
9/25/2015 ION 3.0 Build 15268.01 IONSetup v3.0.15268.01.exe - Bug fixes for alarm label issue set to long with CM3/CM4/PM8, Calibration wizard not being allowed properly, Security wizard not handling old SCF files for new V420 firmware for ION8650, PM8K Meter configuration report, waveform viewer not reporting record timestamp properly. - Modified iEM3455/iEM3555 setup options to match firmware.
- Added new ION8800 comm setup registers to Setup Assistant.
10/2/2015 ION 3.0 Build 15275.02 IONSetup v3.0.15275.02.exe - Bug fixes for PM2xxx setup configuration to match release firmware, backup of INI and security user files and restoring after installer, PM8K/ION7400 4-30 Harmonic viewer incorrect reference for V1 57th magnitude  
10/23/2015 ION 3.0 Build 15296.01 IONSetup v3.0.15296.01.exe - Bug fixes for PM2xxx alarm setup, US Template Modbus Master setup wizard, ION8650 V420 Comm Access right with old/no SCF loads. - Added Flicker Log views for ION7400.
11/6/2015 ION 3.0 Build 15310.01 IONSetup v3.0.15310.01.exe - Bug fixes for CM2xxx alarm multiply text, meter config report and scaling. - Additional changes for PM2xxx setup to align with released firmware.
- ION7400 Transformer Loss assistant modified to match template.
11/27/2015 ION 3.0 Build 15331.01 IONSetup v3.0.15331.01.exe   - Added Meter Setup Configuration reporting for all PM2xxx and PM5xxx models.
12/4/2015 ION 3.0 Build 15338.01 IONSetup v3.0.15338.01.exe - Bug fixes for device grouping properties, CM2000 Meter configuration reporting.  - Added preliminary support for PM9000 in development, meter config reporting for BCPM, and firmware upgrading of some PowerLogic power meters using new FWB files.
1/8/2016 ION 3.0 Build 16008.01 IONSetup v3.0.16008.01.exe - Bug fixes for global IPv6 addresses, PM2xxx voltage mode setting, CM4 PQ Summary, 8650 Phasor display for Delta mode, added IEEE 5-19 support for US templates.   
1/29/2016 ION 3.0 Build 16029.01 IONSetup v3.0.16029.01.exe   - Added US Template Display Editor, increased total supported sites, bug fix for ITC-based device calibration, delta mode phasor viewer, CM4 Alarm programming with increased # of alarms.
2/4/2016 ION 3.0 Build 16035.01 IONSetup v3.0.16035.01.exe - Bug fixes for Delta Vector phasor viewer, CM4 additional PQ alarm parameters added to register map.  
2/26/2016 ION 3.0 Build 16057.01 IONSetup v3.0.16057.01.exe - Bugfixes for Unicode time formats, max module waveform viewing, PM2/PM5 alarm indexing issue, Global Comm Testing printouts, phasor viewing of Modbus based devices. - Added PM650 data log view, removal of PM620 data log setup.
3/11/2016 ION 3.0 Build 16071.01 IONSetup v3.0.16071.01.exe - Bug fixes for 3300/4300 ACM setup crash, resetting labels for FWNs without custom labels, missing network info on meter config report, relative setpt programming via wizard. - Digitally signing of installer and Comm Test reporting improvements.
3/18/2016 ION 3.0 Build 16078.01 IONSetup v3.0.16078.01.exe  - Bug fixes for ION7700 upgrades, ION input selection not listing registers, removal of displays for US Display editor, programming of labels reset back to default using new DCFs. - Automatic closing of assistant when downloading new templates.
3/31/2016 ION 3.0 Build 16091.01 IONSetup v3.0.16091.01.exe - Bug fixes for password entries restricted to fewer characters due to font sizing, digital output association not working properly for PM8/CM3/CM4 - Improved template matching to support alternate CFG files.
4/22/2016 ION 3.0 Build 16113.01 IONSetup v3.0.16113.01.exe  - Bug fixes for WFR uploads with no modules, improper alarm associations, framework pasting issue with Event register, CM2 delta phasor. - Added I/O alarm for PM/CM, new ION exception popup, THD Current G to register map, iEM2xxx SN# firmware.
4/29/2016 ION 3.0 Build 16120.01 IONSetup v3.0.16120.01.exe  - Bug fixes for PM2x25 missing Digital I/O Setup entries, ION8800B setup assistant missing setup assistant entries, CM2xxx comm setup requiring soft reset. -  Added new HEP comm protocols to setup assistant.
5/19/2016 ION 3.0 Build 16140.01 IONSetup v3.0.16140.01.exe  - Bug fixes for adding PM9000, swapping of waveform start/trigger time, PF/Freq assigned to Analog Output on CM/PM setup, Circuit Breaker status reporting of Not Found, ICMP usage for TCP connections.  
5/27/2016 ION 3.0 Build 16148.02 IONSetup v3.0.16148.02.exe  - Bug fixes for print dialog crashing, multiple gateway scanning issues, user calibration issues, Removal of ICMP feature and replaced with asynchronous TCP connections. - ION8800 IEC61850 firmware support.
6/30/2016 ION 3.0 Build 16182.01 IONSetup v3.0.16182.01.exe  - Bug fixes for CM3/4 WFC alarm action not properly shown, IPv6 switched to non-blocking sockets, ION8800 new security feature additions, Digital Inputs event logging and label configuration added to HEP assistants.  
8/5/2016 ION 3.0 Build 16218.01 IONSetup v3.0.16218.01.exe  - Bug fixes for display editor when viewing all ION modules, CM/PM WFC alarm/memor config. Restricted password viewing. - Added new IP Setup Assistant for PM8K, ION7400, SIE9410, PM9K devices with DHCP and duplicate IP detection, new Com4 tab for PM9K.
9/9/2016 ION 3.0 Build 16253.01 IONSetup v3.0.16253.01.exe  - bug fix for battery level firmware issue
- bug fixes for IP Setup wizard
- Added new HEP Log memory assistant, new PM22xx folder with Turkish language selection, PM5350P/EM1350 support
11/30/2016 ION 3.0 Build 16335.01 IONSetup v3.0.16335.01.exe  - Bug fixes for viewing signed scaled integers via Modbus, changed labeling for PM9000 and energy pulsing on some products. - New support for EM72xx enhancements; IP wizard testing/reconnection, preliminary EM4200/EM4900 support, ION7400 Top LED sourcing.
12/2/2016 ION 3.0 Build 16337.01 IONSetup v3.0.16337.01.exe  - Bug fixes for missing PM 2 IP sections in Setup Assistant, a few bug fixes for PM5xxx template pasting.  
2/2/2017 ION 3.0 Build 17033.01 IONSetup v3.0.17033.01.exe - Bug fixes for scripting of Modbus based templates - Added upgrade reminder for new device/firmware, PM850 waveform input selection, RVC changes to ION7650 setup assistant.
3/10/2017 ION 3.0 Build 17069.01 IONSetup v3.0.17069.01.exe - Fix for charting issues when viewing CM/PM data logs containing more than 24 parameters (restricting to only selecting a max of 24 now).
- Fix for ION Setup now properly closing down when exiting via Single Device mode.
- Fix for PM2230 Analog I/O programming to allow FLOAT32 values.
- Added warning when older DCFs were saved without feature information when downloading to other feature sets.
- Addition on template load/save functionality for most PowerLogic family of products.
- Ability to view meter timestamps using non-PC local time (devices can now be set to individual time zones or by sites).
- Support for new ION7650 PQ firmware and feature set including new IP assistant support.
- Preliminary support for adding Interval Status information to HHF Export capability.
- Ability to select all logs in the viewer using + A.
- Shortcut to force disconnect a direct TCP connection which might be broken.
3/14/2017 ION 3.0 Build 17073.01 IONSetup v3.0.17073.01.exe - Bug fixes for template pasting issue when storing/restoring settings and charting issues introduced with previous version.  
3/31/2017 ION 3.0 Build 17090.01 IONSetup v3.0.17090.01.exe -Bug fixes for DM6xxx/EM64xx/Enercept template pasting, waveform charting, HHF interval status and CV issues, PM5350P firmware improvements -Added PM7xx scaling
5/5/2017 ION 3.0 Build 17125.01 IONSetup v3.0.17125.01.exe - Bug fix for device DST offset display issue, PM12xx/DM62xx setup request for 42 registers, CM4 Freq precision. -A dded new PM8K Sag/Swell Alarm/Logging wizards, DDD setup for CM4 setup, ION8650 Cellular activation.
5/18/2017 ION 3.0 Build 17138.02 IONSetup v3.0.17138.02.exe -Bug fix for Update checking for new Box html layout.
- Added bug fix for non-US formatted numbers not showing up properly.
Changes for ION over Modbus feature and Sag/Swell Wizard.
6/9/2017 ION 3.0 Build 17160.01 IONSetup v3.0.17160.01.exe - Bug fixes for viewing of data logs 51 thru 64, printing of ION8650 modules, new HEP Modbus Slave enums/breaker status for non-ULP. Changes to support new IoM version, long LogManager operations, SMEC format changes, added PM556x demand parameters. 
7/7/2017 ION 3.0 Build 17188.01​ IONSetup v3.0.17188.01.exe Fixed issue with Siemens 9340/9360 needing matching folder for model - Added support for new hybrid series meters, multi-mastering support with random ID for IoM.
7/28/2017 ION 3.0 Build 17209.01​ IONSetup v3.0.17209.01.exe Bug fixes for device timezone display selection, zero fill enable restriction, splitting of hybrid devices into each device type, improper min/max log display.  
8/31/2017 ION 3.0 Build 17243.01​ IONSetup v3.0.17243.01.exe EM4900 setup fixes, various IPv6 fixes, EM4200 improvements - Support for new PM Hybrid devices
10/5/2017 ION 3.0 Build
17278.02
IONSetup v3.0.17278.02.exe - fixes for 8650 DRE Zero FIll and Cellular setup assistant issues plus HEP setup assistant for Localization settings. -Added EM42xx/PM2220R setup files
11/3/2017 ION 3.0 Build 17307.01 IONSetup v3.0.17307.01.exe - bug fix for ION/Modbus, IP Setup wizard, DRE Zero Fill fix moved to template functionality. - Added software update dialog indicating progress, firmware upgrade improvements and fixes
01/19/2018 ION 3.0 Build 18019.01 IONSetup v3.0.18019.01.exe   - Added detection for Model 98A digital temperature controller, CM2xxx data log viewing tables, added more commands to TCP operation mode.
03/02/2018 ION 3.0 Build 18061.01 IONSetup v3.0.18061.01.exe - Bug fixes for device scanning, Model 98A device detection, multi-line setup registers with double quotes and CRLF - Added serial hardware selection for timing profiles (optical probes), 4G cell modem setup assistant support
03/09/2018 ION 3.0 Build 18068.01 IONSetup v3.0.18068.01.exe - Bug fix for improper waveform indexing, energy registers not restoring, allow device name modification during device scan, reset meter event log after template paste.  
03/16/2018 ION 3.0 Build 18075.02 IONSetup v3.0.18075.02.exe - Bug fixes for IONTKN.DLL time stamp issue, older ION device scan not detected properly, HEP 4-30 table file fixed, FWN template pasting. - Added improved input linking and advanced ION module viewing capabilities.
05/04/2018 ION 3.0 Build 18124.01 IONSetup v3.0.18124.01.exe - Bug fix for PowerLogic reconnect crashing. - Added new PM1000H models, option to save HHF files using PC Localtime instead of UTC, ION9000 feature enhancements.
05/30/2018 ION 3.0 Build 18150.01 IONSetup v3.0.18150.01.exe - Bug fixes for Modbus Slave assistant/BCPM detection. - Changes to address IONTKN.DLL reporting too many decimal places, CM4000T warnings added when modifying Transient alarm/EN50160 enabled. Support for EM42xx devices finialized, I/O Port warning text added.
05/31/2018 ION 3.0 Build 18151.01 IONSetup v3.0.18151.01.exe - Bug fixes for Modbus Slave assistant/BCPM detection. - Changes to address IONTKN.DLL reporting too many decimal places, CM4000T warnings added when modifying Transient alarm/EN50160 enabled, Support for EM42xx devices finalized, I/O Port warning text added.
06/08/2018 ION 3.0 Build 18159.03 IONSetup v3.0.18159.03.exe - Fixed bug with DNP setups crashing via assistant. - Modified PM8K/ION7400/ION9K Setup Assistants to align with new V2.0 templates and firmware. Added new ION8650 US setup assistants, scan/comm support for new MTZ breakers.
06/19/2018 ION 3.0 Build 18170.01 IONSetup v3.0.18170.01.exe - Fixed hanging issue when no network files present introduced with previous release. Bug fix for template paste with restoring blank namespace settings. - Changed shown time since last time sync to non-second format.
06/22/2018 ION 3.0 Build 18173.01 IONSetup v3.018173.01.exe - Bug fixes for improperly using transferred network files, setup assistant crash when programming enumerated register using new string length. - Added ability to move to input linked ION modules in Advanced ION module setup.
07/13/2018 ION 3.0 Build 18194.01 IONSetup v3.0.18194.01.exe - Bug fixes for commas shown instead of decimal point in Assistant, DGD access code no accepting leadings zeros, E5600 upgrade not properly performing ESC characters. - Added new TOU holiday entry for Honduras, multi-module tiling/module creates during Edit.
07/20/2018 ION 3.0 Build 18201.01 IONSetup v3.0.18201.01.exe - Bug fixes for editing of string register via assistant, Sag/Swell wizard not properly programming waveform/comtrade, crashing on Schneider module. - Added Transient Alarm/Logging for ION9K/9810, Master reset checking event log.
08/02/2018 ION 3.0 Build 18214.01 IONSetup v3.0.18214.01.exe - Bug fixes for not reading network information when starting in Single Device mode, ION over Modbus incorrect CRC checking, incorrect DI1 setup references, E5600 upgrade issues. - Added Transient wizard/alarming for ION9K/9810, memory references for HEP.
08/02/2018 ION 3.0 Build 18214.02 IONSetup v3.0.18214.02.exe - Bug fixes for HEP display editor issues, loading of large network files from other PCs and saving it after prompted, fix for Master Reset not properly showing completion if successful.  
08/02/2018 ION 3.0 Build 18214.03 IONSetup v3.0.18214.03.exe - Bug fixes for not reading network information when starting in Single Device mode, ION over Modbus incorrect CRC checking, incorrect DI1 setup references, E5600 upgrade issues. - Added Transient wizard/alarming for ION9K/9810, memory references for HEP.
08/24/2018 ION 3.0 Build 18236.01 IONSetup v3.0.18236.01.exe - Display wizard bug fix for ION7400/ION9K. - Updates to all HEP PQ wizards, activated meter checklist functionality by default. Display tooltip indicating register bounds. Enhanced phasor viewer to include polarity setup access.
08/24/2018 ION 3.0 Build 18236.02 IONSetup v3.0.18236.02.exe - Display wizard bug fix for ION7400/ION9K. - Updates to all HEP PQ wizards, activated meter checklist functionality by default. Display tooltip indicating register bounds. Enhanced phasor viewer to include polarity setup access.
08/27/2018 ION 3.0 Build 18239.02 IONSetup v3.0.18239.02.exe. - Bug fixes for ION Setup crash when accessing any dialog with an available tooltip and reporting of build file version of DCF templates. - Allow user access to disabling Meter Checklist option.
08/31/2018 ION 3.0 Build 18243.01 IONSetup v3.0.18243.01.exe - Fixed issues with Large/Small RMD upgrades, setpoint learning not updating correctly, 73xx firmware upgrade issue, editing of string registers via assistant.  
09/07/2018 ION 3.0 Build 18250.01 IONSetup v3.0.18250.01.exe - Fixed issue with 61850 GGIO source label differences between PowerPC/HEP devices, missing 5-19 reference for ION7400, proper tagged build referencing, increased elapsed timeout for old RMD upgrading.  
09/21/2018 ION 3.0 Build 18264.01 IONSetup v3.0.18264.01.exe - Bug fixes for HHF file generation, back up of network files, upgrade option via device properties, zero length Modbus Ident responses, incorrect waveform point access during charting. - Added TLS certificate upload to 8650 assistant, IMD/IFL models.
10/12/2018 ION 3.0 Build 18285.01 IONSetup v3.0.18285.01.exe - Fixed program crash when starting up in Metershop mode. Removed menu options from Siemens version.  
11/02/2018 ION 3.0 Build 18306.01 IONSetup v3.0.18306.01.exe - Fixed issues with EM4900 incorrect folder names, additional setup options added, incorrect HEP energy pulsing assistant references, added semi-colon option for CSV files.