Grey | Clipsal - Mounting Accessories, Moulded Plastic Wall Box, 1 Gang

Somove safety password can be reset by code 1581.

1581 is not the general password to enter in the safety configuration. But a password to allow reset of safety password.
If you enter 1581 from the configure button you will have error message and that is normal.



To use the 1581 password you need to use the reset password button.



Enter here the 1581 and validate the safety password erasing.



Now you can go on "configure" button and it will ask you a new password to open the safety configuration.




 

The new firmware (version 1.13.0) for SpaceLogic C-Bus Controllers NAC and AC is available for download on se.com. and in Exchange Platforms

The new firmware version V1.13.0 is available for 5500NAC2, 5500AC2, 5500NAC, 5500SHAC, LSS5500NAC, LSS5500SHAC.

The main features of this new firmware release  (V1.13.0) are:
 

• Scheduler Enhancement
• Error reporting application improvements
• Bug fixes

Related documents can be downloaded along with the firmware file:

• Release Notes for V1.13.0
• User Manual update for firmware V1.13.0

Links for www.se.com page and Exchange to download the firmware and the related documents:
 

5500NAC2 SpaceLogic C-Bus Network Automation Controller Commercialized	Se.com: Link	Exchange: Firmware download page link   Direct link to the firmware file
5500AC2 SpaceLogic C-Bus Application Controller Commercialized	Se.com: Link	Exchange: Firmware download page link   Direct link to the firmware file
5500NAC C-Bus Network Automation Controller End of Commercial	Se.com:  Link	Exchange: Firmware download page link   Direct link to the firmware file
5500SHAC Wiser for C-Bus Automation Controller End of Commercial	Se.com: Link	Exchange: Firmware download page link   Direct link to the firmware file

 

EcoStruxure Panel Server (Universal) - PAS600 / PAS600T / PAS600L / PAS600P

1. Add the EcoStruxure Panel Server-Universal to a project via ‘Launch Device Discovery’ on EcoStruxure Power Commission (EPC) software.
Please refer from 1.00 min onwards in this FAQ video on how to add devices to EPC project.



2. Connect to the EcoStruxure Panel Server.




3. Go to ‘Wireless Devices’ section and click ‘Automatic discovery’.



4. Go to ‘Wireless Devices’ section and click ‘Automatic discovery’.
Once the PowerTag is discovered, you can ‘Stop’ the ‘Automatic discovery’.





5. Add a required label and click ‘Confirm’. PowerTag will be paired to the panel server.




6. Change the details as required to match your installation and click ‘Write To Device’.



For more commissioning and installation instructions, please refer to;
EcoStruxure Panel Server Universal - User Guide
https://download.schneider-electric.com/files?p_enDocType=User+guide&p_File_Name=DOCA0172EN-01.pdf&p_Doc_Ref=DOCA0172EN

EcoStruxure Panel Server Universal – Instructions Sheet
https://download.schneider-electric.com/files?p_enDocType=Instruction+sheet&p_File_Name=GDE74119-04.pdf&p_Doc_Ref=GDE74119

 

We get asked this a lot – and rightly so. We all want to be as efficient with our energy and reduce our energy bills. Easy ways you can make immediate savings are:

1. Installing LED lights – they use less energy, last longer and lower your environmental impact.
2. Stop paying for standby power – even when your devices are on ‘standby mode’ they’re using power. If you’re not using them, turn them off.
3. Check your devices’ eco settings – and turn them on! They’ll save power for you.

If you’re looking for a long-term solution, check out our Wiser Energy Management options or speak with your electrician about the best options for you. Installing Wiser Energy management solutions allows you to use the Wiser by SE app and keep track of your usage, maximise your solar, and save on bills.

You can find more tips on how you can save on your electricity bill each month here.

The recommended steps are:

1. Detach the top of the smoke alarm from its base, remove the battery and hold the ‘test’ button until the alarm is no longer beeping. This completely discharges the smoke alarm for a guaranteed reset.
2. Vacuum the vents.
3. Spray bug surface repellent on a rag then wipe over the unit and surrounding ceiling.
4. Hold the test button for 20 seconds which will reset the unit.
5. If the above fails and it is within the warranty period, you can replace the unit by lodging a warranty form via clipsal.com/warranty (Note: If it is out of warranty, you will need to pay to replace it.)

Remember smoke alarms are there for a reason, so ensure you’re safe at all times.