screw st 3/16bswx20mm ch hd

Cable Management Screws, Screw Combination Head 20Mm 3/16 Bsw

Catalogue Number: 248/20
screw st 3/16bswx20mm ch hd
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Product brand
Clipsal
Screw gauge
3/16"
Length
20 mm
Shape of screw head
combi-head
Sustainable offer status
Green Premium product
EU RoHS Directive
Compliant
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
Product out of China RoHS scope. Substance declaration for your information
Environmental Disclosure
ENVPEP060307EN
Circularity Profile
N/A

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • Technical Data Catalogues

  • Installation Instruction

  • Specifications

  • Certificates (MSDS)

Frequently Asked Questions

hide show

What would be a longer screw to suit Clipsals round j-boxes (Junction Boxes)?

The part number would be 248/20 which is a combination screw head 20MM 3/16 BSW.

Is part number 242/50 suitable for underground?

Yes. Part number 242/50 is suitable for underground.

Is there a 246/50 in orange?

Yes we do but it is manfactured to order.

Can I order the 220/20 in white?

Yes, you can order the 220/20 in white but it needs to be done as a special.
For more information, please refer to the link:https://www.clipsal.com/Trade/Products/ProductDetail?catno=220/20

Do you have a cap/ flange to for 20mm conduit?

Yes the part number is 221/20

Do you have a 32A version of a 438 extension socket?

No, the largest rated version of a 438 extension socket is the 438/20 which is 20A.

What is the part number for 238A with 25mm spout?

The 238/25 has 1 x 25 mm spout & 2 x25 mm conduit entries.

How do I hardwire 10kva and 20kva transformers in a 208/120 or 240/120 environment

Issue:
Implementing a hardwire stepdown transformer in a 208v or 240v environment


Product Line:

Smart-UPS / Symmetra

Environment:

APTF10KT01, APTF10KW01, and APTF20KW01, All Serial Numbers

Cause:

Unbalanced UPS outputs require a stepdown transformer to power 120v loads


Resolution:

This document refers to installing  the APTF10KT01, APTF10KW01, and APTF20KW01 transformers in a North American 120/240 or 120/208 environment. For installations in other regions please consult the users manual.

The wiring block outputs are as follows:


For domestic use, make sure that the Terminal Block Jumper is installed between the Ground Terminal and Terminal 8 on the output wiring block, as illustrated on page 8 of the user manual. Please also make sure that the input voltage switch is in the correct position.

The step-down transformer provides 240/120 output as 2 120v hots, a neutral, and a ground. It provides 208v output as a 120v hot, an 88v hot, and a ground. The 120v hot (terminal  7) and the 88v hot (terminal 9) are 180 degrees out of phase. You will measure 208v from terminals 7 to 9. The step-down transformer is not able to provide 2 120v hots that are 120 degrees out of phase as you would see with utility power.



 Note: If your installation requires both 208v and 120v output power you will need 2 separate subpanels: a 240v/120v panel and a dedicated 208v subpanel.

568/20-WE Clipsal Grommet what is carton quantity?

 
   
 
 100 per carton 
 See attachment for more information 

Are the Clipsal Conduit Clips available in Electric Orange?

No, they are only available in grey.

This applies to the 280/16 (16mm), 280/20 (20mm), 280/25 (25mm), 280/32 (32mm), 280/40 (40mm) and 280/50 (50mm).

What is the part number for a surface mount enclosure to suit 319HP Pneumatic timer?

238/25 is a surface mount enclosure with 25mm end entries that will suit 319HP.

For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=238/25

What are some major differences between M-flex, E-flex, S-Flex and Field Drives?

Issue:
What are some major differences between M-flex, E-flex, S-Flex and Field Drives?

Product Line:
EFlex, MFlex and Field Irrigation

Environment:
All models

Cause:
None

Resolution:
E-Flex AC drives are packaged, adjustable speed drive solutions for commercial and industrial pump and fan applications.  It offers a full range of E-Flex drives to meet specific indoor and outdoor applications
Type 1 enclosure for indoor, non-dusty environments
Type 12K enclosure for indoor, dusty/wet environments
Type 3R enclosure for outdoor, rain or shine environments
Available Ratings
1 - 100 HP variable torque 460 VAC, three-phase input
1 - 50 HP variable torque 208/230 VAC, three-phase input (10° to 50°C ambient temperatures)
 
The S-Flex 212 enclosed drive provides the right features for HVAC pump fan applications.
Available in a NEMA Type 1 enclosure only.
Available Ratings
460 Vac Three Phase / 1 - 100 HP
208/230 Vac Three Phase / 1 - 40 HP
 
The M-Flex™ enclosed drive featuring either the Altivar® 61 or Altivar 71 drives within a Type 1 general purpose or Type 12/12K drip/dust proof enclosure in integrated or barriered designs.  M-Flex enclosed drive controllers are low voltage products available in the following ratings:
Altivar® 71 power converter
1 to 450 hp, 460 V
1 to 40 hp, 208/230 V
Variable torque (Light duty, 110% current limit)
Altivar 61 power converter
1 to 500 hp, 460 V
1 to 50 hp, 208/230 V
 
The Field Drive package is a sealed Type 3R enclosure package that completely isolates all the critical internal electronic components from the outdoor elements. 
Applications
Oil & Gas
Plumbing
Irrigation
Constant torque (Heavy duty, 150% current limit)
Altivar® 71 power converter
1 to 600 hp, 460 V
1 to 100 hp, 230 V
Variable torque (Standard duty, 110% current limit)
Altivar 61 power converter
1 to 700 hp, 460 V
1 to 125 hp, 230 V Available Ratings
1 to 600 hp, 460 V 
 
 

Can the Altivar ATV312 drives do single phase 110 VAC input?

Issue:
Can the Altivar ATV312 drives do single phase 110 VAC input?

Product Line:
ATV312 Drives

Environment:
All serial numbers for ATV312 Drives

Cause:
N/A

Resolution:
No it cannot. The drive can only do 208/230 VAC single-phase on the single phase input rated drives that have the M2 suffix..

Comment fonctionne les compteurs d'energie de l'ATS48.

Goals and Symptoms

Comment fonctionne les compteurs d'énergie de l'ATS48.

Causes and Fixes

Il existe 2 compteurs:

- le compteur en kW ( puissance active ) de 0 à 999 kW;
- le compteur en kW/h qui nécessite le fonctionnement du démarreur pendant au moins une heure ( pour la première ). Son échelle est de 0 à 65535, soit 7,4 années ( 7j/7 et 24h/24 ).

What are the part numbers for the adjustable rating plugs for the Compact NS630B- NS3200, Powerpact P and R frame breaker, and the Masterpact NT and NW breakers?

Inquiry:
Rating plugs for Micrologic breakers

Product Line:
Molded Case Circuit Breaker

Environment:
Powerpact, Masterpact, Compact NS and Micrologic

Resolution:
Interchangeable rating plugs catalog numbers are as follows:

Long-Time Pick-Up Ir = In  x  ... (dial setting below)

What are the part numbers of slip type expansion couplings?

Slip Type Expansion Couplings are available from 16mm through to 50mm.The part numbers of slip type expansion coupling are as follows:
16mm = 251/16
20mm = 251/20 *
25mm = 251/25 *
32mm = 251/32
40mm = 251/40 *
* = only available in Grey
Where long conduit runs are likely to be exposed to wide variations in temperature, it is recommended that expansion couplings be used at each join. It is not recommended that Slip Type Expansion Couplings be used where the conduit run is exposed to the weather. Standard colour is Grey (GY).
Dimension details are attached.
 

What is the replacement mechanism for the surge protection in a 2025SF?

The replacement for the surge protection in a 2025SF is the 30SFM.

Some of the key features are:
  • Peak current (8/20µs) 6.5 kA
  • Maximum clamping voltage (8/20 µs, 100 A) 710 V
  • Energy absorption (10/1000 µS) 3 x 140J
  • Impulse response time <50 ns

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30SFM



 

I need a wiring diagram for the outdoor receiver heaters.

Issue:
Wiring diagram for the outdoor receiver heaters.
Product line:
Condensers
Environment:
Data Center Cooling
Cause:
 
Resolution:

The heater per the unit submittal package is field wired.  A junction box is typically placed at the receiver and the heater whip is pulled into this box where a small terminal bock is placed.  From the junction box a conduit whip can be connected to carry the wire to its final termination.  If the unit is 208/230 the incoming power can be split and the heater can be wired direct with fuses to protect the condenser if the heater should ever short out.  If the condenser voltage is 460/480v, a transformer is required (field supplied) this can be mounted externally under the control box and wired accordingly.

Using Modbus to trigger a Waveform Capture on a CM2000

Product Line
CM2000 series meter

Environment
Modbus Register Writes

Resolution
In order to trigger a waveform capture, it will be necessary to use Modbus Command Writes to trigger the waveform capture.

Using Modbus Tester (or another Modbus read/write program):

Write the value 4913 to register 7700.
Write the value 1 to register 7701.
Write the value 28120 to register 7702.

Are line reactors required for ATV61/ ATV71 series drives?

Issue:
Are line reactors required for ATV61/ATV71 series drives?

Product Line:
Altivar 61 , Altivar 71

Environment:
All models, All serial numbers.

Cause:
Product characteristics unclear.

Resolution:

Our 208/230 and 400/480V rated Altivar 61/71 drives do not require line reactors.  However, depending on the voltage and power quality of the incoming power, a line reactor or other power conditioning device may be necessary in a given installation.  Line reactors are used to filter and clean noisy power being fed into the drive.  They also can lower the incoming voltage a few percentage points if your incoming voltage is running a little high so they are used on a case by case basis, as needed.

The ATV61/71 drives 100HP and below have an internal DC choke which handles a lot of the filtering and power conditioning.  Drives rated 125HP and above have an external DC choke that ships separately and must be field installed.  There is an option to use a 5% line reactor instead of this DC choke so in this case, a 5% line reactor would be mandatory on those drives 125HP and above if the customer decided to not use the DC choke. Either the DC choke or the 5% line reactor must be used, but not both.

Altivar 61/71 drives rated at 575/690V 125HP and above require a 5% line reactor also, it must be used on these drives.

Enclosed Altivar VFD will not run when the run command is given.

Issue:
 The enclosed VFD will not run when run command is given?

Product line:  
Enclosed ATV61 ATV71 ATV58 ATV312 

Environment:  
0 -100 horsepower 460 volts, 0-50 horsepower 208/240 volts   

Cause:
The VFD will not run when given a run command is activated?

Resolution:
Troubleshooting Enclosed VFD with HOA, Test/Normal and AFC/OFF/BYPASS switch. Terminal 24 is the neutral for the 120 V supply.
 
 
              1).   Is the RCR relay energized with the HOA switch in the Hand position? NO
a). Voltage should be present on Terminal 6 (Verify there is a jumper between 6A and 6, or does the EFLEX have a start stop push button, press the start button)
b). Verify voltage on terminal 6A (Verify HOA is in HAND position and voltage is present on both sides of the normally open contact of the HAND side of the HOA, wire H13 and H14)
c). Verify voltage on terminal 1 (Verify the jumper between terminals 2 and 1 is secure, if the has been remove, verify the circuit wired between the terminals 2 and 1 is closed)
d). Verify voltage on terminal 2 (No voltage on terminal 2 verify Fuse (FU1) on the secondary side to the transformer is not blown.
e). If the fuse (FU1) is not blown, verify voltage on the primary and secondary side to the transformer (verify fuses FU2 and FU3 are not blown and then check the power supply to the cabinet.)
 
              2)   Is the RCR relay energized with the HOA switch in the Auto position? NO
 a). Voltage should be present on Terminal 6 (There is an external auto start contact on terminals 6 and 7 supplied by the end user and verify the contact is closed)
 b). Verify voltage on terminal 7 (Verify HOA is in AUTO position and voltage is present on both sides of the normally open contact of the AUTO side of the HOA, wire A13 and A14)
c). Verify voltage on terminal 1 (Verify the jumper between terminals 2 and 1 is secure, if the has been remove, verify the circuit wired between the terminals 2 and 1 is closed)
 d). Verify voltage on terminal 2 (No voltage on terminal 2 verify Fuse (FU1) on the secondary side to the transformer is not blown.
 e). If the fuse (FU1) is not blown, verify voltage on the primary and secondary side to the transformer (verify fuses FU2 and FU3 are not blown and then check the power supply to the cabinet.)

What are the pinouts for current inputs on the AMI0810 when using the FTW308 cable with pigtail leads ?

 

 

 
  : Here are the pin assignments for current inputs I0 - I7 when using the FTW308 cable and the BMXAMI0810 .
 
      
    Current input 0  +                   pins 1/3 blue/white & white/blue are jumped together
    Current input 0  common        pin 2 white/orange
 
    Current input 1  +                   pins 4/6  green/ white & white/green are jumped together
    Current input 1  common        pin 5 orange/white
 
    Current input 2  +                   pins 7/9 white/brown  & brown/white are jumped together
    Current input 2  common        pin 8   white/gray 
 
    Current input 3  +                   pins 10/12 blue/red & red/blue are jumped together
    Current input 3  common        pin 11 gray/white
 
    Current input 4  +                   pins 15 /17 red/ orange & orange/ red are jumped together
    Current input 4  common        pin 16 red/green
 
    Current input 5  +                   pins 18/20 brown/red & red/brown are jumped together
    Current input 5  common        pin 19 green/red  
 
   Current input 6  +                 pins 21/23 red/gray & gray/ red are jumped together
   Current input 6  common        pin 22 black/blue
 
   Current input 7  +                   pins 24/26 black/orange & orange/ black are jumped together
   Current input 7  common        pin 25 blue/black 


R-6-30-17

Legacy KB System (APS) Data: RESL211859 V1.0, Originally authored by DaSo on 06/21/2013, Last Edited by DaSo on 06/21/2013
Related ranges: Modicon M340

Symmetra LX Spare Parts List




Issue

Where can I find a list of commonly replaced spare parts for the APC Symmetra LX UPS system?



Product Line

Symmetra LX



Environment

All serial numbers



Cause

The purpose of this document is to provide a user with a list of spare parts for servicing a Symmetra LX UPS.  If parts not listed are required, please contact technical support for assistance.


Resolution

 
Spare parts for 208/240 VAC Symmetra LX systems (Symmetra system part numbers ending in "P" or "PXR")
 
 
Power Module
 
  • Symmetra LX 4 kVA Power Module, 200V/208V - SYPM4KP


Battery Modules
 
  • APC Symmetra LX Battery Module - SYBT5
  • APC Symmetra LX Battery Module with flame retardant case (used primarily in Japan) - SYBT5FR


Intelligence Modules
 
  • APC Symmetra LX Intelligence Module - SYMIM5
 
 
Rack-Mounting Hardware 
 
  • Symmetra LX Four-Post Rack-Mounting Rails - SYAOPT1 
  • Symmetra LX/Symmetra RM Two-Post Rail Kit - SYOPT12 
 
 
Mainframe Parts and Accessories 
 
  • Symmetra LX frame electronics module – 200V/208V - SYAFSU13 
  • Symmetra LX Input/Output wiring tray – 200V/208V - SYAFSU14 
  • Symmetra LX Communications Card - SYAFSU15 
  • Symmetra LX 13 U replacement door - SYAFSU2 
  • Symmetra LX 19 U replacement door - SYAFSU3 
  • Symmetra LX 32 U replacement door - SYAFSU5 
  • Symmetra LX Castor kit - left front, right rear - SYAFSU6 
  • Symmetra LX Castor kit - right front, left rear - SYAFSU7 
  • Symmetra LX top panel - SYAFSU8 
  • Symmetra LX 13 U left side panel - SYAFSU9L 
  • Symmetra LX 19 U left side panel - SYAFSU10L 
  • Symmetra LX 32 U left side panel - SYAFSU12L 
  • Symmetra LX 13 U right side panel - SYAFSU9R 
  • Symmetra LX 19 U right side panel - SYAFSU10R 
  • Symmetra LX 32 U right side panel - SYAFSU12R


 
Extended Run (XR) Frame Parts and Accessories
 
  • APC Symmetra LX XR Communication Card - SYAFSU16 (used in Symmetra LX branded XR frames - SYAXRxxxx, SYARMXRxxxx, SYBFxxxx)
  • APC Symmetra RM XR Communication Card - SYXRCC (used in Symmetra RM branded XR frame - SYRMXR4)
  • APC Symmetra LX XR Communication Cable - 0W6002B
  • APC Symmetra LX 5U replacement door - SYAFSU1
 
 
 
For 220/230/240/380/400/415 VAC Symmetra LX systems (Symmetra system part numbers ending in "I" or "IXR")
 
 
Power Module
 
  • Symmetra LX 4 kVA Power Module, 220V/230V/240V - SYPM4KI


Battery Modules
 
  • APC Symmetra LX Battery Module - SYBT5


Intelligence Modules
 
  • APC Symmetra LX Intelligence Module - SYMIM5


Rack-Mounting Hardware 
 
  • Symmetra LX Four-Post Rack-Mounting Rails - SYAOPT1 
  • Symmetra LX/Symmetra RM Two-Post Rail Kit - SYOPT12 
 
 
Mainframe Parts and Accessories 
 
  • Symmetra LX frame electronics module – 230V - SYAFSU13I 
  • Symmetra LX Input/Output wiring tray – 230V - SYAFSU14I
  • Symmetra LX Communications Card - SYAFSU15 
  • Symmetra LX 13 U replacement door - SYAFSU2 
  • Symmetra LX 19 U replacement door - SYAFSU3 
  • Symmetra LX 32 U replacement door - SYAFSU5 
  • Symmetra LX Castor kit - left front, right rear - SYAFSU6 
  • Symmetra LX Castor kit - right front, left rear - SYAFSU7 
  • Symmetra LX top panel - SYAFSU8 
  • Symmetra LX 13 U left side panel - SYAFSU9L 
  • Symmetra LX 19 U left side panel - SYAFSU10L 
  • Symmetra LX 32 U left side panel - SYAFSU12L 
  • Symmetra LX 13 U right side panel - SYAFSU9R 
  • Symmetra LX 19 U right side panel - SYAFSU10R 
  • Symmetra LX 32 U right side panel - SYAFSU12R
 

Extended Run (XR) Frame Parts and Accessories
 
  • APC Symmetra LX XR Communication Card - SYAFSU16 (used with Symmetra LX branded XR frames - SYAXRxxxx, SYARMXRxxxx, SYBFxxxx)
  • APC Symmetra RM XR Communication Card - SYXRCC (used with Symmetra RM branded XR frame - SYRMXR4)
  • APC Symmetra LX XR Communication Cable - 0W6002B
  • APC Symmetra LX 5U replacement door - SYAFSU1