elbow conduit insp 20mm

Inspection Elbow, 90Deg, PVC, 20mm, Halogen Free

Catalogue Number: 244HF20
elbow conduit insp 20mm
Retail
$39.48
RRP (Inc. GST)
Colour Black (BK)
  • Black 1 PCE

Specifications

hide show
Product brand
Clipsal
Range of product
Series 244
Diameter
20 mm
Operating angle
90 °
Environmental characteristic
halogen free
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Weight
27 g
Package 1 Height
30 mm
Package 1 width
80 mm
Package 1 Length
50 mm
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Environmental Disclosure
ENVPEP100802EN

Frequently Asked Questions

hide show

what is the part number for an inspection elbow to suit 20mm HFT conduit ?

The part number is 244HF20-BK

Do the DC operated 3 pole D-LINE Tesys contactors come with surge suppression as standard?

Issue:
Do the DC operated 3 pole D-LINE Tesys contactors come with surge suppression as standard?

Product Line:
D line contactors.

Environment:
Products sold in the United States.

Cause:
Product features.

Resolution:
The LC1D09 - D32 contactors with DC coils come with coil suppression as standard


CTA-ID : 2049420

How do I hardwire 10kva and 20kva transformers in a 208/120 or 240/120 environment

Issue:
Implementing a hardwire stepdown transformer in a 208v or 240v environment


Product Line:

Smart-UPS / Symmetra

Environment:

APTF10KT01, APTF10KW01, and APTF20KW01, All Serial Numbers

Cause:

Unbalanced UPS outputs require a stepdown transformer to power 120v loads


Resolution:

This document refers to installing  the APTF10KT01, APTF10KW01, and APTF20KW01 transformers in a North American 120/240 or 120/208 environment. For installations in other regions please consult the users manual.

The wiring block outputs are as follows:


For domestic use, make sure that the Terminal Block Jumper is installed between the Ground Terminal and Terminal 8 on the output wiring block, as illustrated on page 8 of the user manual. Please also make sure that the input voltage switch is in the correct position.

The step-down transformer provides 240/120 output as 2 120v hots, a neutral, and a ground. It provides 208v output as a 120v hot, an 88v hot, and a ground. The 120v hot (terminal  7) and the 88v hot (terminal 9) are 180 degrees out of phase. You will measure 208v from terminals 7 to 9. The step-down transformer is not able to provide 2 120v hots that are 120 degrees out of phase as you would see with utility power.



 Note: If your installation requires both 208v and 120v output power you will need 2 separate subpanels: a 240v/120v panel and a dedicated 208v subpanel.

What material is the plain reducer 264HF3M made out of?

The plain reducer 264HF3M is made out of Fire resistant plastic alloy.
Please note: Standard Colour Black, 32mm - 25mm, HFT Products cannot be joined with standard conduit glues. They require adhesives similar to Loctite 406.

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=264HF3M