Quantcast

Solid Fittings - PVC, PVC Couplings, 40mm

Grey | Solid Fittings - PVC, PVC Couplings, 40mm

Solid Fittings - PVC, PVC Couplings, 40mm

Item Number: 242/40-GY

Retail
$9.69
RRP (Inc. GST)

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Product brand

Clipsal

Range of product

Series 242

Product destination

diameter: 40-40 mm tube

Sustainable offer status

Green Premium product

Physical

Length

58-58 mm

Standards

AS/NZS 2053

REACh Regulation

Free of Substances of Very High Concern above the threshold

REACh free of SVHC

Yes

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Toxic heavy metal free

Yes

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

 Pro-active China RoHS declaration (out of China RoHS legal scope)

Environmental Disclosure

ENVPEP100802EN

Material

Material

PVC (polyvinyl chloride)

Others

Package 1 Weight

31 g

Package 1 Height

63 mm

Package 1 width

50 mm

Package 1 Length

50 mm
Show all specifications

Frequently Asked Questions

hide show

Is part number 242/50 suitable for underground?

Yes. Part number 242/50 is suitable for underground.

Are the Clipsal Conduit Clips available in Electric Orange?

No, they are only available in grey.

This applies to the 280/16 (16mm), 280/20 (20mm), 280/25 (25mm), 280/32 (32mm), 280/40 (40mm) and 280/50 (50mm).

What are the part numbers of slip type expansion couplings?

Slip Type Expansion Couplings are available from 16mm through to 50mm.The part numbers of slip type expansion coupling are as follows:
16mm = 251/16
20mm = 251/20 *
25mm = 251/25 *
32mm = 251/32
40mm = 251/40 *
* = only available in Grey
Where long conduit runs are likely to be exposed to wide variations in temperature, it is recommended that expansion couplings be used at each join. It is not recommended that Slip Type Expansion Couplings be used where the conduit run is exposed to the weather. Standard colour is Grey (GY).
Dimension details are attached.
 

What is the operating principle of a detector for XSAV type rotation control?

Advantage and preferred uses

  • XSAVxx inductive sensors for rotation control have the special feature of combining data acquisition functions and processing by a pulse comparator in a single unit, thus creating an integrated rotation control device.
  • These devices provide a good solution for monitoring slip, belt break, coupling break, overloads, etc. in the following applications: conveyor belts, bucket elevators, lifting screws, grinders, crushers, pumps, centrifugal drying machines, mixing machines, etc.

 

Principle

The output signal of this type of sensor is processed by a pulse comparator integrated in the device.

The frequency of the pulses Fc emitted by the moving element to be monitored is compared with the frequency Fr preset on the device.

The output switching circuit of the sensor is at closed state when Fc > Fr and open state when Fc < Fr.

XSA-V sensors are particularly suitable for underspeed detection: when the speed of the moving element to be monitored Fc falls below a preset threshold Fr following deceleration, this detection leads to opening of the device's output circuit.

 

Other characteristics

  • Two ratings: 0.1 Hz-2.5 Hz and 2 Hz-50 Hz
  • Cylindrical inductive sensor, diameter 30
  • Range 10 mm

Special features:

  • Detection and comparison of pulses are integrated in the device
  • The frequency is preset in the device using a 15-turn potentiometer
  • Caution: The adjustment of the threshold is not linear according to the number of turns
  • For both ratings there is a 3-wire model with 12-48 VDC power supply and a 2-wire model with 24-240 VAC or 24-210 VDC power supply
  • Rotation monitoring becomes effective 9 s after the sensor MST
  • Connection via 2 m cable