General Accessories Screw to Suit 240 Series

Catalogue Number: 240SCREW
RRP (Inc. GST)


hide show
Product brand
Package 1 Weight
1 kg
REACh free of SVHC
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope)
Toxic heavy metal free
Mercury free
RoHS exemption information
China RoHS Regulation
 Pro-active China RoHS declaration (out of China RoHS legal scope)

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • Technical Data Catalogues

  • Specifications

  • Corporate Marketing

Frequently Asked Questions

hide show

How many 31JSCREW are in one bag?

They come in bags of 100.

What screws would suit a 265/1-GY.

The part number for the screws would be 265SCREW.

What is the part number for the screw and standoff for the Momentum NEF adapters?

screw W103851350312
standoff 31006550


How do you secure a 30 series mech to a BSL plate

You can use a Clipsal 31JSCREW to secure the mech from behind.  Screws are sold individually.

Can the suppled products in our Distribution board be taken out by the customer?

All the products are Screw bolted, so customer can unscrew them and take it out.
But we don't guarantee about the IP rating though and even needs to buy the blank  escutcheen and do the cut out by himself.

Can the AR8132A be used to replace the combination door handle of an AR3200 NetShelter SX Colocation Cabinet?

The combination door handle on the AR3200 NetShelter Colocation enclosure needs to be replaced but the AR8132A doesn't fit.

Product Line: 
NetShelter SX Colocation

All versions and serial ranges.

The hasp on AR8132A doesn't latch the NetShelter Colocation door correctly.

Resolution: see below

When replacing the combination lock handle of an AR3200 with an AR8132A you must reuse the hasp from the rear of the original AR3200 combination lock handle.
Do not use the hasp that ships with the AR8132A, it will not work on the AR3200.
Simply unscrew the hasp on the rear of the original AR3200 door handle and swap it for the hasp on the replacement AR8132A.
After completing this swap and installing the replacement AR8132A you will be left with the original AR3200 door handle, and the hasp that came with the replacement AR8132A.

How do I remove the Front Cover to connect the Modbus Serial cable to the Modbus serial port on the Altivar 600 Process Drive?

How do I remove the Front Cover to connect the Modbus Serial cable to the Modbus serial port on the Altivar 600 Process Drive?

Product Line:
Altivar 600 Process Drive

All serial numbers for Altivar 600 Process Drive



Procedure to remove the Front Cover of the Drive:

1) Unscrew the four screws attaching the front cover
2) Slide down the front cover
3) Remove the front cover
4) Plug the Modbus serial cable in the Modbus serial port


Is the Symmetra RM System Fan Hot-swappable?

Is the Symmetra RM system fan hot swappable?  What is the replacement procedure?

Product Line:
Symmetra RM

All serial ranges

The system fan is a consumable mechanical item and will most likely require replacement at some point during the lifetime of a UPS system.


APC by Schneider Electric officially recommends that a Symmetra RM UPS be completely powered off before attempting to service the system fan.  To ensure that a system is completely powered down correctly, please follow these steps:

1.) Disconnect the input power from the UPS.  This is typically done by opening the circuit breaker that feeds the UPS.  The UPS should now be running on battery.
2.) Open the input circuit breaker on the UPS itself.  This is located on the rear of the Symmetra RM 6kVA system.  The placement of this breaker is on the rear of a Symmetra RM 12kVA system.  The UPS should still be running on battery.
3.) Disengage EACH battery module at least a few inches.
4.) Disconnect any external battery frames that may be connected to the Symmetra.  The UPS will now turn off.
5.) Turn the system enable switch off. 

After following these steps, the unit will be completely powered down.  It is now safe to unscrew and disconnect the original fan.  The new fan can be connected and screwed in place.  Once this is secure, the system should be started back up by following the above steps in reverse.