Quantcast

Junction Box, Standard, 16mm I.D, 2 Way Angle Entry

Grey | Junction Box, Standard, 16mm I.D, 2 Way Angle Entry

Junction Box, Standard, 16mm I.D, 2 Way Angle Entry

Item Number: 240/16/2A-GY

Retail
$22.28
RRP (Inc. GST)
Colour Grey (GY)
  • Grey 1 PCE

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product

Series 240

Product brand

Clipsal

Physical

REACh free of SVHC

Yes

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Toxic heavy metal free

Yes

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

 Pro-active China RoHS declaration (out of China RoHS legal scope)

Material

Material

PVC (polyvinyl chloride)

Others

Shape

round

Package 1 Weight

0.001 kg
Show all specifications

Frequently Asked Questions

hide show

What is the part number of a Junction box with 25mm entry but entries in U shape?

Unfortunately we dont make U entry junction box any more, closest will be 240/25/2A and similar.

Does the 252/32/2A come in orange?

No, the 252/32/2A only comes in grey.

What is the difference between AS/NZS 3112 and AS/NZS3123?

AS3112 is the Approval and test specification used for standard 3 pin 10/15/20A plugs and sockets
AS3123 is the  for Approval and test specification used for three phase round pin plugs and sockets.

What is the part number for mounting block to suit 900/16/16?

The part number for mounting block to suit  is a - 900SPMB

For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=900SPMB



User-added image

What is the part number for PVC junction box, 4 way, H type?

How do I hardwire 10kva and 20kva transformers in a 208/120 or 240/120 environment

Issue:
Implementing a hardwire stepdown transformer in a 208v or 240v environment


Product Line:

Smart-UPS / Symmetra

Environment:

APTF10KT01, APTF10KW01, and APTF20KW01, All Serial Numbers

Cause:

Unbalanced UPS outputs require a stepdown transformer to power 120v loads


Resolution:

This document refers to installing  the APTF10KT01, APTF10KW01, and APTF20KW01 transformers in a North American 120/240 or 120/208 environment. For installations in other regions please consult the users manual.

The wiring block outputs are as follows:


For domestic use, make sure that the Terminal Block Jumper is installed between the Ground Terminal and Terminal 8 on the output wiring block, as illustrated on page 8 of the user manual. Please also make sure that the input voltage switch is in the correct position.

The step-down transformer provides 240/120 output as 2 120v hots, a neutral, and a ground. It provides 208v output as a 120v hot, an 88v hot, and a ground. The 120v hot (terminal  7) and the 88v hot (terminal 9) are 180 degrees out of phase. You will measure 208v from terminals 7 to 9. The step-down transformer is not able to provide 2 120v hots that are 120 degrees out of phase as you would see with utility power.



 Note: If your installation requires both 208v and 120v output power you will need 2 separate subpanels: a 240v/120v panel and a dedicated 208v subpanel.

Show More