Quantcast

Cable Management PVC Medium Gap Filling Blue Cement, 1000ml Bottle with Brush

Cable Management PVC Medium Gap Filling Blue Cement, 1000ml Bottle with Brush

Cable Management PVC Medium Gap Filling Blue Cement, 1000ml Bottle with Brush

Item Number: 240/1000BU

Retail
$164.42
RRP (Inc. GST)

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Product brand

Clipsal

Sustainable offer status

Green Premium product

Physical

REACh Regulation

Free of Substances of Very High Concern above the threshold

REACh free of SVHC

Yes

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Toxic heavy metal free

Yes

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

 Pro-active China RoHS declaration (out of China RoHS legal scope)

Environmental Disclosure

ENVPEP100802EN

Others

Package 1 Height

110 mm

Package 1 Length

160 mm

Package 1 width

110 mm

Package 1 Weight

994 g
Show all specifications

Frequently Asked Questions

hide show

What is the difference between 240/500BU and the 240/500CL?

The only difference between the 240/500BU and the 240/500CL is the colour only. The materials and chemicals used are the same.

Some of the key features are:

  • Medium Gap Filling
  • 500ml Bottle
  • Comes with Brush for easy application
  • Available in Clear or Blue
For further informaation please visit www.clipsal.com/Trade/Products/ProductDetail?catno=240/500CL

 

Symmetra PX 250/500 Battery to Power Module Ratio

Issue:
Symmetra PX 250/500 Battery to Power Module Ratio

Product line:
Symmetra PX 250/500

Environment:
All Product models, all serial numbers

Cause:
Required battery to power module ratio for a Symmetra PX 250/500

Resolution:

Ratio between numbers of battery shelves and power modules (PM)

Maximum recommended discharge level on the batteries used for Symmetra PX 250/500 is 3CA, where CA means the current (Amps) by which the battery is charged or discharged divided by its Amp-hour (Ah) rating.  The 250kW runtime ratio is 10 PMs to 16 battery shelves resulting in a ratio of 1.6 battery shelf per 1 PM. Need to always round up the number of shelves

Results if ratio is not maintained

In some situations, the Power Modules will attempt to draw power from the batteries and if the ratio is not observed, you will potentially clear fuses in the battery modules and (less likely, but it happened before) burn traces on the battery backplane boards due to the DC inrush current.

 

 

Configuring Concept I/O Scanning for ZBRN1 Receiver

After setting the IP address
Set the UNIT ID to 255
Read Ref Slave to 400001
Read Length to 4    (This will read 4 16 bit registers)
Read Ref Master to a location on the PLC ex. 400100

This will write to 400100, 400101, 400102 & 400103

Changing Symmetra PX 250/500 System Time from NMC – Configuring NTP server

Issue:
Changing Symmetra PX 250/500 System Time from NMC – Configuring NTP server

Product line:
Symmetra PX 250/500

Environment:
All Product models, all serial numbers

Cause:
Time not updating on UPS when changed on NMC

Resolution:
Making changes on the NMC web interface will also make changes on the ups, but the NMC must first be configured for Read/Write in the user configuration settings on the UPS.  Once this is configured making changes on the NMC will update the display on UPS.

When changing NMC configuration to update Time using NTP, you need to pay attention to the update Interval.  It can be set from 1 to 8760 hours(1 year).  Make sure this is configured as needed.  If time is not immediately updating, click the UPDATE Now box and click apply.  You may need to refresh screen on UPS a couple times to see the change.


 

Video: How do I adjust Display settings on my Symmetra PX 250/500 UPS

Issue:
How to adjust Display settings            

Product line:
Symmetra PX 250/500

Environment:
All Product models, all serial numbers
 
Resolution:



How to adjust your display brightness, timeout, other display settings, or calibrate the touch screen, on your Symmetra PX 250-500 kVA UPS.
 
Begin at the home screen of the UPS.  



Press the wrench key at the lower left of the screen.
 
Select Configuration then User Configuration



Enter the User password (apc by default)



Select 'Display Settings'

Video: How to Start your Symmetra PX 250/500 UPS

Issue:
How to Start your Symmetra PX 250/500 UPS
 
Product line:
Symmetra PX 250/500
 
Environment:
All Product models, all serial numbers

Resolution:
Begin by applying power to the UPS by Closing the Q1 Breaker (Located in System I/O Cabinet)



Once the display is completely powered up and the Home screen is displayed, press the wrench icon in the lower left of the screen



Then select the operation button
Select System Startup



Follow the on screen prompts for starting up the UPS.  As each option is performed it will highlight the next step.


Some options are automated and will be done for you.

The following video demonstrates this procedure:
 
Show More