Quantcast

Solid Fittings - PVC, Plain Converters, 1 Inch to 25mm

Grey | Solid Fittings - PVC, Plain Converters, 1 Inch to 25mm

Solid Fittings - PVC, Plain Converters, 1 Inch to 25mm

Item Number: 235/1/25-GY

Retail
N/A
RRP (Inc. GST)

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Sustainable offer status

Green Premium product

Product brand

Clipsal

Range of product

Series 235

Product destination

diameter: 25-25 mm tube

Physical

Mercury free

Yes

REACh free of SVHC

Yes

REACh Regulation

Free of Substances of Very High Concern above the threshold

China RoHS Regulation

 Pro-active China RoHS declaration (out of China RoHS legal scope)

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

RoHS exemption information

Yes

Environmental Disclosure

ENVPEP100802EN

Toxic heavy metal free

Yes

Length

50-50 mm

Standards

AS/NZS 2053

Material

Material

PVC (polyvinyl chloride)

Others

Package 1 Weight

0.018 kg
Show all specifications

Frequently Asked Questions

hide show

What is part number for 35/125 duct?

The part number for 35/125 duct is a - PL35125D

For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=PL35125DW

Do you have 238-WE that can be used for Slimline outlets?

Yes, we do the part number is 238C/25.

What are the part numbers of slip type expansion couplings?

Slip Type Expansion Couplings are available from 16mm through to 50mm.The part numbers of slip type expansion coupling are as follows:
16mm = 251/16
20mm = 251/20 *
25mm = 251/25 *
32mm = 251/32
40mm = 251/40 *
* = only available in Grey
Where long conduit runs are likely to be exposed to wide variations in temperature, it is recommended that expansion couplings be used at each join. It is not recommended that Slip Type Expansion Couplings be used where the conduit run is exposed to the weather. Standard colour is Grey (GY).
Dimension details are attached.
 

What are the horsepower ratings on a LUB32 U Line motor starter?

10Hp at 200/208V, 10Hp at 220/240V, 20Hp at 460V and 25Hp at 575/600V.


CTA-ID : 2054125

What type of fiber optic cable is recommended for the M340 or M580 BMXNRP0200 fiber optic repeater?

Title
BMXNRP0200 fiber optic cable recomendation
 
Issue
BMXNRP0200 fiber optic cable specification
 
Product Line
M580 M340, BMXNRP0200
 
Environment
Unity Pro
 
Resolution
 Below are the parameters specified for the Fiber Optic cable:
  •  the wavelength of the optical signal: 1310 nm
  •  the cable index: use graded-index cable only
  •  Fiber size - 50/125 μm or 62.5/125 μm or  9/125 μm
For most multimode optical cable links, the use of 62.5/125 μm cable is recommended because of its relatively low loss and signal distortion. Select the fiber optic cable that meets the demands of your application. Multi-conductor cables are recommended. Most 62.5/125 μm cables are rated at 1.5 dB loss per km. With a multi-conductor cable, pairs come with an attenuation specification as measured, which is less than 3.5 dB/km.
The fiber ports, in both multi-mode and single-mode modules, use LC-type connectors.

Does Clipsal do a 238 with 25mm entries, top and bottom?

No we don't. The closest we get is the 238A/25 with one 25 entry on the top.
Show More