230UB 230  U  BOLT Resi MAX Meter Boxes

Resi MAX 229 'U' BOLT

Catalogue Number: 230UB
230UB 230  U  BOLT Resi MAX Meter Boxes
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Product brand
Clipsal
EU RoHS Directive
Compliant
Circularity Profile
N/A

Frequently Asked Questions

hide show

Where can I get the wiring diagram for the control box (part number: 230CB) for 230MC Motor Case?

Issue:
 Control box wiring diagram

Product Line:
Demo Box for Altivar Drives

Environment:
 Demo box motor case part number 230MC

Cause:
None
 
Resolution:
Attached is the wiring diagram for the ATV drives Demo Case 230MC.
 

Is the 230CS board still available?

 No, unfortunately the 230CS is no longer available.

For further information please visit https://www.clipsal.com/Trade

Can 30USB be used in ML2025?

Yes. The part number ML2025I can be used with 30USBCM.


 

What is the depth behind the panel on the 230MV?

The depth behind the panel on the 230MV is 85mm.

What is amp level of 30USB?

30usb has amp level of 1.2

For more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=30USBCMsal.com/Trade/Products/ProductDetail?catno=30USBCM

Can 230MI series meter isolator enclosure be pad locked when the circuit breaker is in the ON and OFF position?

230 series meter isolator is designed to be padlocked when the circuit breaker is in the OFF position for safety reasons. When the circuit breaker is in the ON position, 230MI cannot be padlocked. To prevent capability to lock when the circuit breaker is in the ON use only Clipsal Range MCB’s.

For further information, please visit  https://www.clipsal.com/Trade/search-results?q=230MI


 

I am looking for a wall fan with a 240mm cutout and is physically approx 300mm square

You can use a Clipsal 7106A or 7108A both have a 230mm cut out and are 271mm square

What is the cut out for the 7500ATP?

290mm X 290mm with a minimum ceiling cavity of 230mm

Is there a din rail, lockable enclosure with 4 modules?

No, unfortunately this part is not available. However, there is the 230MI which is a lockable enclosure but it is only 3 modules.

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=230MI
 

What is the dimension for behind internal panel in the 230MV?

The dimension for behind internal panel in the 230MV is - 76mm

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=230MV
User-added image

Can the contacts be rated to 230v?

Yes. Kindly check the wiring diagram.


 

Can Domae MCB's and RCCB's be used in a 400v residential switchboard?

Yes. They are insulated to 440v.
We only import and supply single pole MCB's specifically for the residential market. The 230v rated voltage marking complies with AS/NZS 60898-1 for use in 230v, 230/400v, or 400v systems as per section 5.3.1.

What is the replacement for Sarel 87903 ?

The replacement for Sarel 87903 is NSYCVF300M230PF

NSYCVF300M230PF 
ClimaSys forced vent. IP54, 300m3/h, 230V, with outlet grille and filter G2

 

What is the lug torque specification for a Powerpact J frame circuit breaker?

Product Line:
Circuit Breakers
PowerPact J

Environment:
Electrical Distribution Equipment

Resolution:
The standard al/cu lugs are rated at 225lb-in and require a 5/16 in hex bit torque wrench. See below for lug information.
The AL175JD ( 150 - 175A) is 225lb - in.
The AL250JD ( 200 - 250A) is 225lb - in.
The CU250JD (150 - 250A) is 250lb - in

See instruction bulletin, 48940-221-02

What is the part number for a wall ex-fan 200mm with cut out of 230mm?

The part number for a wall ex-fan 200mm with cut out of 230mm is - 7105A

For further information , visit link below:-

https://www.clipsal.com/Trade/search-results?q=7105A
User-added image
 

What is the cut out size for 7105A, 200mm window exhaust fan?

The cut out size for 7105A, 200mm window exhaust fan is 230mm diameter. 7105A is remotely switched with auto shutters,38W, IPX4, 600m³/hr.
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=7105A
User-added image

Can I convert a 460V ac drive to a 240V drive ?

Issue
Can I convert a 460V ac drive to a 240V drive ?

Product Line: 
Altivar

Environment:
 All

Cause:
Others

Resolution:
No, there are no options for converting a drive from 460V to 240V.

Is there a 30USB in a 2000 Series double power point?

No, unfortunately that part is not avaliable. However, there is a 2000 Series with a single power point and twin USB charger.
The partnumber is 2015USB2C.
Some of the key features are:
  • 2015 10A GPO
  • Twin 30USBCM USB Chargers
  • Surge, over-current and over-temperature protection
  • Cable compensation for optimised charging
  • Meets BC1.2 USB Charging Standard
  • Meets Class V Energy Efficiency in standby
  • Certified to all relevant safety and EMC requirements for Australia

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=2015USB2C
 



 

Can you output 460V out of a drive with only 230V coming in and the drive is also rated for 230V?

Issue:
Can you output 460V out of a drive with only 230V coming in and the drive is also rated for 230V?

Product Line:
All drives

Environment:
All

Cause:
N/A

Resolution:
No.  A drive cannot act as a transformer.  In most cases what is coming in at the line side of a drive is what will be coming out.
 
The only exception is the ATV12 drives that can accept 120V input and output 230V.  This is limited to 1 HP. 
 

Is there an Altivar drive available that can convert 220V single phase input to 460V three phase output?

Issue:
Is there an Altivar drive available that can convert 220V single phase input to 460V three phase output?

Product Line:
All Altivar Variable Frequency Drives and Altistart Soft Starters.

Environment:
All models, All serial numbers.

Cause:
Customer has 460V three phase motors available but only 220V single phase power available.

Resolution:
No, there are no drive products that can convert 220V single phase power to 460V three phase power. There are drives in our product lineup that can convert single phase 230V to three phase 230V. If the motor is dual rated for 208-230V / 460V operation, then wiring it for 230V may be a better option.
 

What is the replacement/ alternate for mistral wall exhaust fan, part number 6108-0?

7108A  and two 7100WP wall plates can be used as an alternate for 6108-0 mistral wall exhaust fan.
7108A is Wall Mounted Exhaust Fan with pull cord switched shutters, 200MM Fan, 230mm diameter cut out, IPX4, 38W, 600m³/hr.
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=7108A

User-added image

7100WP is a wall plate to cover cutting errors for 7100 Series MaxAir fans (200mm) or to assist the replacement of older style Airflow or Mistral wall fans.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=7100WP

User-added image

What is the replacement part number for wall exhaust fan 6110-0?

7106A  with 2 wall plates 7100WP can be used as an alternate to the wall exhaust fan 6110-0.
7106A is a 200mm wall mounted exhaust fan, switched remotely, auto shutters, BCA axial fan, IPX4, 38W, 230mm diameter cut out, 600m³/hr. For further information, please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=7106A
User-added image

7100WP is a wall plate to cover cutting errors for 7100 Series MaxAir fans (200mm) or to assist the replacement of older style Airflow or Mistral wall fans. For further information, please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=7100WP
User-added image

What are the 9013FHG pressure switch contacts rated at?

Issue:
Contact Rating of 9013F Pressure Switches

Product Line: 
Pressure, vacuum and Float Switches 

Environment:
9013 Type F Pressure Switch 

Resolution:
Those contacts have a control circuit rating of A600.
They are DC rated at 1/4 HP at 115V and 230V (Except form M4)
They are Single Phase AC rated 1 1/2 HP at 115V, 2 HP at 230V
They are Polyphase rated 2 HP at 115V, 3 HP at 230V, and 1 HP at 460/575V.

This also applies to the 9013 FHG2, 9, 12, 13, 44, 49 9013 FSG, and FSW.

Can leakage voltage affect 7550/7650 digital inputs?

Goals and Symptoms

In certain cases a device that is connected and triggering the digital inputs on an ION7650 or ION7550 can have a leakage voltage. A leakage voltage is occurs when a device produces a certain amount of voltage across its terminal when it is open (ideally the value should be 0 volts).
In the case of a device triggering a digital input: when the device closes the circuit the digital input registers a trigger, and when the same device opens the circuit the digital input should not be registering a trigger.

But in the case of a voltage leakage (when the triggering device is open) some testing is required to determine the results.

Facts and Changes

Keywords:
input doesn't open
leakage voltage
ION7650
ION7550
switch
digital input
closed
swap
change state

Causes and Fixes

The internal resistance between the Scom and S8 or S7 in the diagram below is 230K, while on the old 7550/7650 (before September 2009) meters it was 40K.

The minimum amount of current required for the meter at the digital inputs to register a pulse is 50 micro A.

Hence with this information, figure out if a leakage voltage across the digital input connection is enough to produce a 50 micro ampere current. If the leakage produces a 50 micro ampere current or more work out the circuit to reduce the current.

Attachments

(Removed Image URL: /PubResEXPORT.nsf/2b87ee90be777fc085257c28006ee4ef/fe27003880d70902c125761a0010930e/fl_block_5/0.1A60?OpenElement&FieldElemFormat=gif)
Date Created: August 10, 2009
Last Revised: August 21, 2009
Public
Original Author: SN
All content © 1992-2009 Schneider Electric


Legacy KB System (APS) Data: RESL199691 V1.0, Originally authored by MiNe on 08/22/2009, Last Edited by MiNe on 08/22/2009
Related ranges: ION7550/ION7650

Why can I not adjust output Voltage on my SMX "LV" or "HV" series Smart-UPS?

Issue:
User is unable to adjust output voltage on SMX "LV" or "HV" series Smart-UPS.

Product Line:
Smart-UPS

Environment:
SMX "LV" or "HV" series Smart-UPS, All Serial Numbers

Cause:
Smart-UPS SMX units with "LV" or HV" in the suffix (IE: SMX3000RMLV2U or SMX3000RMHV2U" are designed for use in multiple power environments. "LV" units can output 100v, 120v, or 127v. "HV" units can output 208v, 220v, 230v, or 240v.

Output voltage can be configured using either the LCD screen on the UPS itself, or a Network Management Card.

In order to adjust the output voltage, you must first turn off the output power of the UPS. If you attempt to change the output voltage  via the NMC with the load powered, you will see an error message. On the LCD interface the option is not  shown in the menu until output is turned off. You cannot adjust the output voltage with the UPS providing power to an attached load.

Resolution:
Turn output power OFF via the LCD screen or Network Management Card interface.

Once the UPS output is turned off, you can adjust output power via the "Configuration" menu on the LCD screen or Network Management Card web interface. If using the LCD screen, you must first enable Advanced menus.

Is it possible to run an 480V Altivar drive with 480V supply but their motor is only rated for 230V?

Issue: 
Is it possible to run an 480V Altivar drive with 480V supply but their motor is only rated for 230V?

Product Line:
All 480 Volt Altivar drives.

Environment:
All models rated for 480V input and output, All serial numbers.

Cause: 
Incompatible motor/drive selection made

Resolution:
It is not recommended to operate a 208/230V motor from a 480V drive.   It is possible if certain conditions are met to do so temporarily however it is strongly advised that the correct voltage drive/motor be installed.  

A 230V motor requires roughly twice as much current as a 460V motor to produce the same amount of horsepower and this can exceed the rating of the 480V drive.   Also, you must set the rated motor voltage in the drive to match the actual rated voltage of the motor.  Refer to the programming manual for your particular drive for instructions to change this parameter.  Also, be aware that the output of the drive is not a true sine wave.  It is a pulse width modulated signal generated by the IGBTs and each of these pulses will be at the voltage of the DC bus.  On a 230V drive the DC bus voltage is typically around 325 VDC.  On a 480V drive this voltage is typically around 680VDC.  This increased voltage may cause damage to your motor.  If a 480V drive must be used on a 230V motor temporarily, a 5% load reactor should be placed between the output of the drive and the motor to help reduce this voltage.  In all cases it is advised to replace the motor or drive as needed to a selection that is compatible.   Note that a 480V drive can not operate with 230V input so if 480V supply is all that is available then the drive must be rated for 480V.  In this situation it would be best to replace the motor with one rated for 460V.

 

Why can't I use an international model SU, SUA, SUM, SMT, or SMX series Smart-UPS in North American 208v or 120v environments?


Issue:

Why can't I use an international model SU, SUA, SUM, SMT, or SMX series Smart-UPS in North American 208v or 120v environments?

Product Line:

Smart-UPS

Environment:

All International models, All Serial Numbers

Cause:

Product Information

Resolution:

International model testing is based on the primary environments in which it will be used. For example, units used in Europe must be verified according to EC Directives. All Smart-UPS international models can be sold in Europe because it is compliant with EN standards. UL (Underwriters Laboratory) has specific ratings and certifications for 120V models which are never performed on international models. That is, 230V Smart-UPS units would not be tested based on certifications appropriate for North America because the units are intended for overseas usage.


The grounding of an international unit differs from a 120V model. In the international model, there is normal mode surge suppression, but no common mode surge suppression. That is, there are no protective devices between the Neutral to Ground (N-G or the Hot to Ground(H-G) paths; therefore, no Site Wiring Fault Light is present. There is, however, full surge suppression between Hot and Neutral (H-N).

International models do not depend on the ground wire for surge suppression.


International Model Smart-UPS can be identified in several ways:

The box in which it is shipped has a sticker on the outside that indicates 220-240Vac, International Use Only.

The receptacles on the back are IEC320s; an international standard, and there is no input power cord included on the smaller units.

The model name, located on the rear white label, has 'I' as part of the name; for example SUA2200I.

Can I use a 230v Smart-UPS in a 277v environment?

Issue:

Use of Smart-UPS products in 277v environments

Product Line:

Smart-UPS

Environment:

All Line Interactive 230v models, All Serial Numbers

Cause:

Product Information

Resolution:

Line Interactive Smart-UPS (SU, SUA, SMT, SMX) products with an "I" in the suffix of the part number are designed for a nominal 230v input. (Ex: SMT1500I, SUA3000XLI, etc). Some units can also be configured for optional nominal input voltages of 220v and 240v. Although transfer points can be widened to allow the unit to function online with even higher input voltages, the unit is not designed for this and will ultimately run into issues.

Problems in this type of configuration include:

  • Short runtime due to repeatedly switching to battery operation
  • Unintentional load drops due to discharged batteries
  • Shortened battery life due to frequent discharges
  • UPS Not turning back on after a power outage due to high input voltage
  • Increased wear and tear on the UPS hardware by continuous mode switching

Using a 230v "I" unit in a 277v environment is not supported or recommended.

The web page for each product will list a nominal input voltage, and if any other input voltages are acceptable they will be listed as "Other Input Voltages".  We do not currently offer a Smart-UPS product for use in 277v environments.

The specification for "Input voltage adjustable range for mains operation" on our product pages is the full range of operation. This includes the use of Boost and Trim with the UPS voltage transfer points configured to their widest setting. This full range may be encountered on occasion during power events and is not meant to indicate normal online operation of the UPS. Smart-UPS products are designed for use in environments supported by their Nominal Input Voltage or any listed "Other Input Voltages" only.

 

What are the Vijeo Designer v6.2 Runtime specifications/limitations?

Issue:
What are the Vijeo Designer v6.2 Runtime specifications/limitations?

Product Line:
Vijeo Designer, XBTGC/GK/GT, HMIGK/GTO/GTU/STO/STU, iPC, Panel PC, Box PC

Resolution:
Below are the Runtime specifications for Vijeo Designer v6.2.

Run-Time Specifications

  • Use the following statistics as only a guideline for creating your own applications. Some applications may not be able to run despite remaining below these documented numbers because of memory limitations. To make sure your application will run correctly, check the memory requirement for each panel and operation, and compare these requirements with your target machine. For details, see Section 25.3.3, Checking Memory Usage. Always test your application thoroughly before running it in a production environment.
  • The following statistics were obtained by testing each individually on factory machines. These numbers will vary depending on the operating environment, the complexity of the application, the CPU load, and the amount of memory available on the target machine. Some of these performance numbers can be enhanced with upgraded memory, CF Cards/SD Cards, and hard disks.
Panels
Number of panels/popup windows (limit) The number of panels that can be created in a project depends on the amount of flash memory available on your target machine and on the size of  each panel. For example, you can have a project on an XBTGT6330 target that contains 100 panels.
As the number of panels for your project increases, memory consumption also increases.
Number of objects on a panel (recommended) The number of objects that can be placed on a panel depends on the target machine's panel height and width. For example, you can have a project on an XBTGT6330 target that contains 200 objects per panel.
As the number of objects placed on a panel increases, memory consumption also increases.
Popup windows (limit) Number of popup windows that can be displayed at run time: maximum of 3, which includes the popup keypad.
Large Toolchest parts On some targets, large parts placed on a panel may cause a wait time to occur when changing panels. For example, on an XBTGC 2230U, switching from one panel to another panel with a Web Browser took several seconds.
Actions
Maximum number of actions 100
Scripts
Maximum length of each script (recommended)
For other script recommendations, see Section 18.3.4, Key Points.
50 lines
Error Logging
Number of run-time events stored 100
Alarms and Events
Number of Alarm Groups and Event Groups in a Target (limit) 32 max.
Number of Alarm Categories and Remote Categories in a Target (limit) 32 max.
Number of event records in an event group (limit) The number of event records you can store in each event group is 10,000 max. Events are recorded in both History and Log, which results in having two event records for each event that occurs. For example, if you set 10,000 as the maximum number of total records, you can only store 5000 events.
Number of alarms in alarm groups (limit) The number of Log and History alarm records you can store in each alarm group is 10,000 max.
In the Alarms node, when Backup Alarm Group is set to No, you can store up to 80,000 total Log and History alarms in a target's alarm groups.
When Backup Alarm Group is Yes, the number of alarms is limited by the space available on SRAM.
Number of alarms in an alarm category (limit) and remote category 60,000
Alarm Backup
The size required by each alarm message depends on the alarm type.
Active: 20 bytes per record
History: 24 bytes per record
Log: 16 bytes per record
SRAM Capacity (Backup) is different for each target machine type.
128 to 512 KB (Depends on model. Refer to your hardware manual.)
For information about how much SRAM is required by your project, see Section 4.5.1, Target Properties.
E-mail
Number of attachments per e-mail 1 max.
Maximum size of file attachment 10 MB
Link Objects
Maximum number of definition objects (per Target node) 100
Maximum of folder levels in the folder structure for definition objects (per Target node) 5
Files
Number of text files (limit) 200 max.
Text file size (recommended) 50KB max.
Number of video files (limit) 200 max.
Number of sound files (limit) HMIG5U / HMIG5U2 / iPC / XBTGTW Series HMIG3U / XBTGC / XBTGT / XBTGH / HMIGTO / HMISTO / HMISTU / HMISCU / HMIGK Series XBTGK Series
1,500 200 200
Languages
Number of user languages you can create (allowed) 15 max.
Variables
Number of variables per panel (limit) HMIG5U / HMIG5U2 / iPC Series All other target types
Maximum 2500 variables per panel Maximum 800 variables per panel.
Number of variables per target (limit) HMIG5U / HMIG5U2 / iPC / XBTGTW Series HMIG3U / XBTGC / XBTGT / XBTGH / HMIGTO / HMISTO / HMISTU / HMISCU / HMIGK Series XBTGK Series
12000 max. 8000 max. 8000 max.
  • For iPCs, if persistent variables such as alarm variables and data logging variables are used, a maximum of 8000 variables can be supported for each iPC target.
Number of variables you can share (recommended) HMIG5U / HMIG5U2 / iPC / XBTGTW Series HMIG3U / XBTGC / XBTGT / XBTGH / HMIGTO / HMISTO / HMISTU / HMISCU / HMIGK Series XBTGK Series
400 300 300
  • The Maximum Number of Shared Variables is the recommended maximum number of variables that is shared at any one time NOT the maximum number of Sharing-enabled (Read-only or Read/Write) variables. In other words, the number of variables that you set to Read-Only or Read/Write has no limits; only the number of variables that are accessed by other targets is limited. Performance may become an issue if you exceed the recommended maximum.
Security
Number of security groups per target 20 max.
Number of users per security group 100 max.
Number of users per target 100 max.
Number of users per Vijeo Designer project 200 max.
Driver Restrictions on Windows Target Machines
Biometric Switch The Biometric Switch's USB driver currently does not support Windows target machines running on embedded Windows operating systems, including Windows XP Embedded and Windows Embedded 7.
Drivers not supported on target machines that run Windows operating systems The following drivers are not supported on Windows operating systems, and therefore Windows target machines cannot connect to physical equipment using these drivers. Simulation in Buildtime is also not supported.
Schneider Electric:
  • Modbus TCP/IP USB
  • Modbus Plus
  • Modbus Slave RTU
  • FIPIO
  • FIPWAY
Siemens AG:
  • MPI/PPI
Rockwell Automation:
  • DH485
Data Logging
Number of Data Logging Groups in a target (limit) 80
Maximum number of variables being logged in a target HMIG5U / HMIG5U2 / iPC / XBTGTW Series HMIG3U / XBTGT1005 / XBTGT2000 and higher / XBTGC / XBTGK / HMIGTO / HMISCU / HMIGK Series HMISTO / HMISTU Series XBTGH Series
250 variables max. 100 variables max. 60 variables max. 80 variables max.
Table Resources
Maximum number of table resources in a tablet/smartphone project 10
Maximum number of states in a table resource 255
Resource Library
Maximum number of Text, Color, Image, Font Resources in a project (limit) 256
Maximum size of an image file used in an image resource 1920x1080
Forms Printing
Number of forms you can create for each user application (limit) 50 max.
Maximum number of objects on one form (recommended) 2000
Communication
Number of equipment nodes (limit) HMIG5U / HMIG5U2 / iPC / XBTGTW Series HMIG3U / XBTGC / XBTGT / XBTGH / HMIGTO / HMISTO / HMISTU / HMISCU / HMIGK Series XBTGK Series
80 max. 48 max. 48 max.
Number of scan groups per equipment (limit) 20 max. per equipment node
Number of Maximum Share Connections (limit) HMIG5U / HMIG5U2 / iPC / XBTGTW Series HMIG3U / XBTGC / XBTGT / XBTGH / HMIGTO / HMISTU / HMIGK / HMISCU Series XBTGK Series
32 8 8
  • The maximum number of shared connections includes:
  • Remote targets in target-to-target sharing
  • Web Gate
  • Vijeo Design'Air Plus mobile devices
  • Remote alarm access from other targets
  • Intelligent Data Services (IDS) tool access
Recipe
Total number of recipe groups (standard recipe group or Parison Recipe Group) per target 32 max.
Number of recipes in a recipe group (limit) 256 max.
Number of ingredients in each recipe (limit) for a standard recipe group 1024 max.
Number of ingredients in each recipe (limit) for a Parison Recipe Group 64 min.
400 max.
 
The user application you create in the Editor is restricted by target machine run-time specifications. The following table lists the memory capacity of available target machines. DRAM memory affects how much information you can display on the panel at one time. Internal Memory affects the total size of your application. SRAM memory affects how much information you can store between run-time sessions.
If you are using a tablet/smartphone, the memory capacity depends on the model. See the manufacturer's specifications for more information.
 
Target Machine Memory (DRAM) Storage Media / Internal Memory (Flash Memory) Memory (SRAM)
Magelis iPC Compact MPC KT52 256 or 512 MB N.A. 2 MB (Simulated)
Compact MPC KT22 512 or 1024 MB N.A. 2 MB (Simulated)
Compact MPC KT12 512 or 1024 MB N.A. 512 KB
Compact MPC KT55xx2 512, 1024, or 2048 MB N.A. 512 KB
Compact MPC KT22xxx20 512 MB N.A. 512 KB
Compact PC Box MPC KN02 512 MB N.A. 512 KB
Smart MPC ST52 256, 512, or 1024 MB N.A. 2 MB (Simulated)
Smart MPC ST21 256, 512, or 1024 MB N.A. 2 MB (Simulated)
Smart MPC ST11 256 or 512 MB N.A. 512 KB
Smart/Smart+ MPC ST52xx2/HMI PSx7 256, 512, or 1024 MB N.A. 512 KB
Smart Box MPC SN01 256 MB N.A. 512 KB
Smart MPC ST21xxx20 512 MB N.A. 512 KB
Flex PC Box PTX MPC02 512 MB N.A. 2 MB (Simulated)
Flex PC Box PTX MPC05 512 MB N.A. 2 MB (Simulated)
Box Performance HMIBPxxx2 2-8 GB Storage media 512 KB
Box Performance HMIBPxxx5 2-8 GB Storage media 512 KB
Box Universal HMIBUxxx1 1-3 GB Storage media 512 KB
Box Universal HMIBUxxx2 1-3 GB Storage media 512 KB
HMIGTW5354/Panel W HMIPWC5 1-2 GB Storage media 512 KB
HMIGTW7354x/Panel Optimum HMI PWC7/PVC7 1-2 GB Storage media 512 KB
Panel Performance HMIPPx6 4 GB DDR3 (in 1 slot) Storage media 2 MB (Simulated) or Interface Option ports (IF and IF2)
Panel Performance HMI PPx7/PRx7 2-8 GB Storage media 512 KB
Panel Performance HMIPPx9 2-8 GB Storage media 512 KB
Panel Universal HMIPUx6 2 GB DDR3 (in 1 slot) Storage media 2 MB (Simulated) or Interface Option ports (IF and IF2)
Panel Universal HMI PUx7/PTx7 1-3 GB Storage media 512 KB
Panel Universal HMIPUx9 1-3 GB Storage media 512 KB
XBTGTW450 512 MB N.A. 2 MB (Simulated)
XBTGTW652 256, 512, or 1024 MB N.A. 2 MB (Simulated)
XBTGTW750/HMIGTW7353 512 MB N.A. 2 MB (Simulated)
Rack PC Optimized HMIRSO/HMIRXO 2 GB Storage media Use Internal Flash to simulate SRAM.
Rack PC Universal HMIRSU 4 GB Storage media Use Internal Flash to simulate SRAM.
Rack PC Performance HMIRSP 4 GB Storage media Use Internal Flash to simulate SRAM.
S-BOX PC Optimized HMIBSO 2 GB Storage media Use Internal Flash to simulate SRAM.
S-BOX PC Universal HMIBSU 4 GB Storage media Use Internal Flash to simulate SRAM.
S-Panel Performance HMIPSPx7 8 GB Storage media 2 MB (Simulated) or Interface Option ports (IF and IF2)
S-Panel Performance HMIPSPx9 8 GB Storage media 2 MB (Simulated) or Interface Option ports (IF and IF2)
Enclosed PC Performance HMIPEPx9 8 GB Storage media 2 MB (Simulated)
S-Panel Optimized HMIPSOx5 4 GB Storage media 2 MB (Simulated) or Interface Option ports (IF and IF2)
S-Panel Optimized HMIPSOx7 4 GB Storage media 2 MB (Simulated) or Interface Option ports (IF and IF2)
Box Universal HMIBMU 4 GB Storage media 512 KB
Performance HMIBMP 8 GB Storage media 512 KB
Magelis HMIGTO Series HMIGTO1300 128 MB 64 MB 128 KB
HMIGTO1310 128 MB 96 MB 512 KB
HMIGTO2300 128 MB 64 MB 128 KB
HMIGTO2310 128 MB 96 MB 512 KB
HMIGTO2315 128 MB 96 MB 512 KB
HMIGTO3510 128 MB 96 MB 128 KB
HMIGTO4310 128 MB 96 MB 512 KB
HMIGTO5310 128 MB 96 MB 512 KB
HMIGTO5315 128 MB 96 MB 512 KB
HMIGTO6310 128 MB 96 MB 512 KB
HMIGTO6315 128 MB 96 MB 512 KB
Magelis HMIGTU Series HMIG3U 256 MB 1 GB 512 KB
HMIG5U 2 GB 16 GB 512 KB
HMIG5U2 2 GB 16 GB 512 KB
Magelis HMISCU Series HMISAC (HMIS65/S85) 128 MB 128 MB 128 KB
HMISBC (HMIS65/S85) 128 MB 128 MB 128 KB
Magelis HMISTO Series HMISTO501 32 MB 16 MB 128 KB (Simulated)
HMISTO511 32 MB 16 MB 128 KB (Simulated)
HMISTO512 32 MB 16 MB 128 KB (Simulated)
HMISTO531 32 MB 16 MB 128 KB (Simulated)
HMISTO532 32 MB 16 MB 128 KB (Simulated)
Magelis HMISTU Series HMISTU655 32 MB 16 MB 64 KB
HMISTU855 32 MB 16 MB 64 KB
HMIS5T 64 MB 32 MB 64 KB
Magelis XBTGT Series XBTGT7340 64 MB 32 MB 512 KB
XBTGT6340 64 MB 32 MB 512 KB
XBTGT6330 32 MB 32 MB 512 KB
XBTGT5430 32 or 64 MB*1 32 MB 512 KB
XBTGT5340 64 MB 32 MB 512 KB
XBTGT5330 32 MB 32 MB 512 KB
XBTGT5230 32 MB 32 MB 512 KB
XBTGT4340 64 MB 32 MB 512 KB
XBTGT4330 32 MB 32 MB 512 KB
XBTGT4230 32 MB 32 MB 512 KB
XBTGT2930 64 MB 16 MB 512 KB
XBTGT2430 64 MB 32 MB 512 KB
XBTGT2330 32 MB 16 MB 512 KB
XBTGT2220 32 MB 16 MB 512 KB
XBTGT2130 32 MB 16 MB 512 KB
XBTGT2120 32 MB 16 MB 512 KB
XBTGT2110 32 MB 16 MB 128 KB
XBTGT1335 32 MB 32 MB 128 KB
XBTGT1135 32 MB 32 MB 128 KB
XBTGT1105 32 MB 32 MB 128 KB
Magelis XBTGC Series XBTGC1100T 32 MB 16 MB 512 KB
XBTGC1100U 32 MB 16 MB 512 KB
XBTGC2120T 32 MB 16 MB 512 KB
XBTGC2120U 32 MB 16 MB 512 KB
XBTGC2230T 32 MB 16 MB 512 KB
XBTGC2230U 32 MB 16 MB 512 KB
XBTGC2330T 32 MB 16 MB 512 KB
XBTGC2330U 32 MB 16 MB 512 KB
Magelis XBTGH Series XBTGH2460 64 MB 32 MB 512 KB
Magelis XBTGK Series XBTGK2120 32 MB 16 MB 512 KB
XBTGK2330 32 MB 16 MB 512 KB
XBTGK5330 32 MB 32 MB 512 KB
Magelis HMIGK Series HMIGK2310 128 MB 96 MB 512 KB
HMIGK5310 128 MB 96 MB 512 KB
 
*1 The XBTGT5430 model comes in two versions that differ in their DRAM size (32 MB or 64 MB). To determine the version of the XBTGT5430, look for the following serial numbers on the manufacturer's label on your target machine:  
  • 32 MB: PV: 01, RL: 00, SV: 1.0
  • 64 MB: PV: 01, RL: 01, SV: 1.1
In Vijeo Designer when you select XBTGT5430 as a target machine, by default it is set to the 64 MB version. No additional memory check is performed for the 32 MB version. Make sure your application does not exceed the amount of DRAM available on your target machine. To find out the amount of memory available on a target machine, see Section 26.4.6, Displaying Memory.