The depth behind the panel on the 230MV is 85mm.
230 series meter isolator is designed to be padlocked when the circuit breaker is in the OFF position for safety reasons. When the circuit breaker is in the ON position, 230MI cannot be padlocked. To prevent capability to lock when the circuit breaker is in the ON use only Clipsal Range MCB’s.
For further information, please visit https://www.clipsal.com/Trade/search-results?q=230MI
290mm X 290mm with a minimum ceiling cavity of 230mm
You can use a Clipsal 7106A or 7108A both have a 230mm cut out and are 271mm square
No. We have 10A intermediate switch , 30MI (standard type) & 60PBI(for Saturn)
For more information on intermediate switched please visit the Clipsal web site on the link provided https://www.clipsal.com/Trade/search-results?q=30mi
Control box wiring diagram
Demo Box for Altivar Drives
Demo box motor case part number 230MC
Attached is the wiring diagram for the ATV drives Demo Case 230MC.
You can use the 30MI (PG 60 of Clipsal Pocketbook) in any of the 4030 Series Grid and Plates to suit 30 Series mechanisms (PG 17 of Clipsal Pocketbook)
The closest we have is our 7108A which is a wall fan with pull cord and has a cut-out of 230mm.
Dimensions 220mm x 220mm square
No - not available in New Zealand
The 30M Series products have fluorescent capacity of approximately 5A
Both the 30MD and 30MI are not recommended for switching of multiple fluorescent fittings.
For further information please visit https://www.clipsal.com/Trade
Height= 260mm if cut to allow use of extra din rail in DBF45 or DBF60, panel is 290mm uncut
The cut out dimensions for the 7500ATP-WE are 290mm x 290mm
There is no 280mm fan available.
GE6324 Earth / neutral Bar Length = 300 MM
Width = 30MM + 15MM + 15MM (30MM is where the bars sit - then the metal bracket bends on an angle twice)
The Bars are 220mm long - Earth bar is flat on the Bracket - Neutral bar is on the standoffs - MEN link is cable tied as in the photos attached
The part number is PL125CL*
Only 125mm not 130mm and drop in was discontinued only have a S clip on lid now
The part number for 200mm pull cord wall fan is 7108A.
No unfortunately there is no 200mm window fan available.
The dimensions are as follows: 330MM x 330MM.
Part codes which are available in 3S - 30M, 30USM, 30MI, 30MD, 30MBPR, 30M35, 32E450UDM, 32E450LM, 32E450TM
The dimensions for the MB248D32 are 1000mm (H) x 580mm (W) x 235mm (D).
No there is no replacement door you will need to buy the full unit for replacement Part No.: 230MV
The diameter is 200mm x 95mm
Yes, the part number is 7106A
The cut out Size is 240mm Diameter cut out.
The part number for a intermediate mech in the prestige series is a P30MI.
The Overall Dimensions - 130mm x 32mm
Mounting Centres - 114mm
There is no offer at all for the EA31C series as this was discontinued a long time ago and had a drop in lid which is also discontinued and there is no option for power shroud etc.
The exhaust fan we have that would fit in a 330mm cut-out is a mistral 6230-0
Some of the key features are:
- Axial fan
- Twist lock grille
- Grille is able to be easily removed for cleaning
- Fly-proof grille to keep out insects
- Fitted with plug and lead
- High performance motors
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=6230-0
The cut out size is 290mm diameter. See the installation instructions attached for further information.
Yes, the 6600A can have a 200mm duct fitted.