NSW METER BOX

Resimax Meterbox With Black Laminated Meter Panel, H680 x W470 x D280 mm

Catalogue Number: 230DRANS
NSW METER BOX
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Range
Resi MAX
Product or component type
meter box
Enclosure/cubicle description
plain door enclosure
Device application
  • distribution
  • metering
    • Targeted country
      New South Wales
      Enclosure mounting
    • surface
    • semi flush
      • Provided equipment
      • enclosure
      • removable meter panel
        • Function available
        • cable protection slide
        • clips lead retainer
          • Protection device type
            miniature circuit breaker (MCB) - 63 A - 2P - 6 kA
            Cable entry
            knock-out rear and bottom
            Door type
            ventilated removable door with door retainer
            Door opening side
            right
            Lock type
            padlockable
            Material
            iron (galvanised)
            Width
            470 mm
            Height
            680 mm
            Depth
            280 mm
            IP degree of protection
            IP23
            Standards
            AS/NZS 3000
            EU RoHS Directive
            Not applicable, out of EU RoHS legal scope

            Frequently Asked Questions

            hide show

            Are spare doors available to suit the 230DRAV?

            Yes, The part number is 230DRAVAD this will also suit the  230DRAQ.​
             

            What is the part number for the spare door for 230DRAV / 230DRAVL / 230DRAQ?

            The part number for the spare door is 230DRAVAD

            Is your 230DRANS NSW meter board work cover approved?

            In 2014 the work cover approved legislation was revoked. As it is now a non-existent legislation we are no longer able to get it certified, please note this applies for ALL manufacturers.
            The 230DRANS meter board is suitable for temporary and permanent installations and complies with all relevant standards and legislation.

            Do 230DRAT, Tasmanian meter boards come with earth cable?

            Since Q1 2016 Clipsal started supplying 230DRAT boards with an earth cable. Prior to this 230DRAT boards were supplied without the earth cable and it was the builders reponsibility to add an earth cable on site .
            For further information on 230DRAT, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=230DRAT

            What pole fillers are used in the 230DRAS board?

            PDLDBF15/23 is the pole filler used in the 230DRAS board.

            Some of the key features are:
            • Switchboard spare part
            • 7.5 modules
            For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=DBF15/23
             

            What is the part number for a replacement door for the 230DRAT?

            The part number for a replacement door for the 230DRAT is - 230DRAVAD.

             

            What is the part number for a spare door for a 230DRAQ?

            The part number for a spare door for a 230DRAQ is 230DRAVAD.
             

            What size hole is in the padlock bracket in the 230DRANS?

            The padlock is common to all our meter box range.
            It is suitable for standard padlock - 6mm diameter

             

            Is there a replacement Meter Panel for 230DRANS?

            Yes. The part number is 230DRANSAP.

            This product fully replaces the meter panel within the 230DRANS.


             

            Is there a locking kit to suit the 230DRAT?

            No there is not.

            What are the dimensions for the 230DRAS3?

            The dimensions for the 230DRAS3 are - H608 X W612 X D257mm (Overall Dimensions), Meter Panel Dimensions: H550 X W350mm.

            For further information , visit link below:-
            https://www.clipsal.com/Trade/search-results?q=230DRAS3
            User-added image
             

            What is the IP rating for 230DRAVL

            The 230DRAVL has an IP rating of 23

            What is part number for spare earth & neutral bar assembly to suit 230DRAV?

            The part number for spare earth & neutral bar assembly to suit is a SP-6500138.

            How many modules are in part number 230DRAVL?

            Part number 230DRAVL is a 21 module enclosure.

            Can the 230DRAQ be hinged to the left?

            The 230DRAQ can only be hinged to the right

            Is 230DRAQ available in stainless steel?

            Unfortunately not, 230DRAQ is not available in stainless steel.
            For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=230DRAQ

             

            What are the pole fillers to suit a 230DRAVL?

            The pole fillers to the 230DRAVL is the 4F6-WE.

            Is external lock for available for 230DRAVL, Victorian Meter box?

            230DRAVL enclosure door comes with a provision for an optional, external lock. Unfortunately we do not sell the external lock.

            For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=230DRAVL

            What is the part number for internal lock for 230DRAVL?

            Unfortunately, no part number as a spare for 230DRAVL.

            Do you sell the bush that comes in the 230DRAV?

            No, unfortunately we don't sell those bushes, they only come in the board.

            For further information please visit https://www.clipsal.com/Trade

            How many modules are there in the 230DRAT?

            There are 21 modules in the 230DRAT.

            For more information, please refer to the link:
            https://www.clipsal.com/Trade/Products/ProductDetail?catno=230DRAT


            What is the replacement part number for the door on the 230DRAVL?

            The replacement door is ordered as a special using the following part number: 230DRAVAD

            Is there a replacement for the 230DRAV2?

            No there is not.

            What are the screws for the neutral and earth bar in the 230DRAVL?


             The neutral and earth bar in the 230DRAVL are 6mm in diameter , 1mm pitch and 11mm in length. 

            User-added image


             

            What is the part number for Earth & Bar assembly to suit 230DRAVL?

            The part number for Earth & Bar assembly to suit is SP-6500138.

            What is the dimensions of a 230DRAVL Switchboard?

            The dimensions of a 230DRAVL Switchboard are 690 mm (H) x 470 mm (W) x 280 mm (D).
            Some of the key features are:
            • Metal
            • Victorian type
            • Include 100 A service fuse holder and meter link
            • 21 module switchboard and meter box
            For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=230DRAVL

            What is the distance between the rear of the 230DRAVL and the rear of the metre panel?

            There is a 7cm clearance between the rear of the meter box and the rear of the meter panel.

            Does the 230DRAVL come in different colours?

            No, unfortunately there is no other colours available. it may be possible as a special but not as an off the shelf product

            Is the fuse, lock - out bar for the 230DRAVL done as a spare part?

            No, it is not.
            For further information, visit the link below:-​
            https://www.clipsal.com/Trade/Products/ProductDetail?catno=230DRAVL

             

            Can I get the labels from the 230DRAVL as an off the shelf part?

            Yes, the green labels are the 4C15-6G and the red is 4C15-6R.

            For more information, please refer to the link:
            https://www.clipsal.com/Trade/Products/ProductDetail?catno=4C15-6R


            Image result for 230DRAVL Labels

            Replacement part number for 230DRAV Combine meter/ switchboard?

            The 230DRAV Combine meter/ switchboard has been replaced with a 230DRAVL Combine meter/ switchboard with Lock.
            Our new 230 series is designed to provide ease of installation and consumer safety, with a range of functional options to suit any application.
            Some of its key features are:
            • Metal
            • Victorian type
            • Include 100 A service fuse holder and meter link
            • 21 module switchboard and meter box
            For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=230DRAVL
             

            What colour is 230DRAVL VIctorian Meter box?

            Matt ivory is the colour of 230DRAVL. The dimensions of the meter box are 690H x 470W x 280D. Internal Meter Panel has the dimensions of 380H x 400W.
            For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=230DRAVL
            User-added image
             

            Is there a 230DRAVL with 2 rows of din rail rather than just 1 row?

            No. Unfortunately, there is not. We only have one style of 230DRAVL.
            For more information, please refer to the link:​https://www.clipsal.com/Trade/Products/ProductDetail?catno=230DRAVL

            Can a 3 phase meter be installed in 230DRAVL?

            Yes, a 3 phase meter can be installed in 230DRAVL.

            For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=230DRAVL


             

            What is the part number for a replacement door to suit the 230DRAVL?

            The replacement door part number is 230DRAVAD

            What replacement parts for the 230DRAVL combine meter/ switchboard are avaliable?

            For a list of replacement parts see table below:
             
            Description Part Number
            Bracket only for temporary power service pole (excludes pipe).
            Note: a pipe and bracket are required for temporary power service.
            230PBV
            Spare U-bolt and hex nuts for 230PBV 230UB
            Spare doors to suit 230DRAVL 230DRAVAD
            Spare neutral and earth bar assembly SP-6500138
            Sliding bracket for temporary power leads SP-6330135

            For further information please visit https://www.clipsal.com/Trade/search-results?q=230DRAV
            or see PDF attached.
             

             

            How much depth (wiring space) is available behind the meter panel in a 230DRAVL?

            The depth (wiring space) available behind the meter panel in a 230DRAVL is 70mm.

            Key features of a 230DRAVL are
            • Metal
            • Victorian type
            • Include 100 A service fuse holder and meter link
            • 21 module switchboard and meter box

            For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=230DRAVL
             

            How do i seal up a 50mm hole in the 230DRAVL?

            Using parts 220S50-GY and 260/50-GY. Placethe 260/50 on the inside and the 220S50 on the out side place it in the hole and screw them together. This willl then seal the hole.

            For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=260/50
            https://www.clipsal.com/Trade/Products/ProductDetail?catno=220S50