Acti 9 Comb Busbar, 3L+N Balanced, 9 mm Pitch, 24 Modules, 80A

 21501 for a 12 module and a 21503 for the 24 module. these are a Schneider part which is equivalent to the 4bb5/26
Clipsal’s range of busbars are available in 63A - 250A versions and have been specifically designed to make installations quicker and easier.
Please see following link for further information and complete range.
https://www.clipsal.com/Trade/Products/ProductDetail?catno=4BB5/26

The combination Busbars to suit the slim line RCBO's like RCBE216/30S are the RMXPH105 ( 5 pole) , RMXPH112 (12 pole)  OR RMX124  (24 pole)
For more information on this product range please visit the Clipsal web site on the link provided.
https://www.clipsal.com/products/detail?CatNo=RCBE216/30S&backto=/search?q=RCBE216/30S&tab-document-1=0&itemno=RCBE216/30S
https://www.clipsal.com/search?q=RMXPH112

 140 x 94 x 81mm ( L x W x D)

 Use a LV438575 - NSX100N 30Amp 1P 50kA breaker

Issue:
Product Design Features

Product Line:
Circuit Breaker Enclosures

Environment:  
Wiring diagram location and information

Cause:
Specifications and Date Code for product

Resolution:
NOTE: This information will generally apply to ALL the Molded Case Circuit Breaker Enclosures(The F-frame, B-Frame, H-frame, the J-frame, the L-frame, the M-frame and P-Frame). But for the video a J250S was used.



The wiring diagram on the circuit breaker enclosures will be located on, one of the inside sidewalls of the enclosure. All the necessary information for the enclosure will be on the wiring diagram and will contain the following;
1) Catalog and series number of the enclosure
2) What type of Circuit breakers that can be used
3) Any accessory that can be used in the enclosure, like the solid neutral and equipment ground kit
4) The UL listed catalog number Prefixes for the breakers that can be used in the enclosure
5) Maximum wire sizes for the enclosure(NOTE: Sometimes the breaker can accept larger wire, BUT the enclosure wire bending space will be limited to what the wiring diagram shows)
6) The Wiring schematics
7) The Short Circuit Current Rating information for each breaker at each voltage level
8) The Date code. The date code will be an ink stamp, generally located on the inside back wall of the enclosure. The Date Code will be a 5 or 6 digit code and will read as follows; first two digits = year, the 2nd two digits = week of the year, the 5th digit = the day of the week and the last digit(if used) = the shift. For example, 183241 is year - 2018, week of year -32, day of week - 4 and shift - 1. (Aug. 9th, 2018)

 The maximum length of a Modbus Plus network cable without repeater is 457 metres (1500 ft).